From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Sanchayan Maity To: jic23@kernel.org Cc: shawn.guo@linaro.org, kernel@pengutronix.de, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, B38611@freescale.com, devicetree@vger.kernel.org, linux-iio@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, stefan@agner.ch, Sanchayan Maity Subject: [PATCH v2 0/2] Implement sample time consideration for Vybrid's ADC Date: Wed, 24 Jun 2015 14:03:39 +0530 Message-Id: List-ID: Hello, This patchset adds a dt binding for specifying sample time for the vybrid adc driver and takes this into account for sampling frequency calculation and related configuration in the driver. The patchset is based on top of Stefan's patches here http://lkml.iu.edu/hypermail/linux/kernel/1505.3/02043.html which got recently applied. Tested with shawn's for-next branch. Changes since v1: Change from a vendor specific fsl,min-sample-time to non vendor specific min-sample-time. Version 1 of the patchset can be found here http://lkml.iu.edu/hypermail/linux/kernel/1506.1/00026.html - Sanchayan. Sanchayan Maity (2): iio: adc: Determine sampling frequencies by using minimum sample time ARM: dts: vfxxx: Add property for minimum sample time .../devicetree/bindings/iio/adc/vf610-adc.txt | 6 ++ arch/arm/boot/dts/vfxxx.dtsi | 2 + drivers/iio/adc/vf610_adc.c | 74 ++++++++++++++++++++-- 3 files changed, 78 insertions(+), 4 deletions(-) -- 2.4.4