[PATCH 0/2] st_lsm6dsx: add vdd-vddio power regulator

[PATCH 0/2] st_lsm6dsx: add vdd-vddio power regulator

[Lorenzo Bianconi]

Introduce support to control VDD and VDDIO power lines available on
st_lsm6dsx devices

Lorenzo Bianconi (2):
  iio: imu: st_lsm6dsx: add vdd-vddio voltage regulator
  dt-bindings: iio: imu: st_lsm6dsx: introduce vdd-vddio regulators
    bindings

 .../bindings/iio/imu/st_lsm6dsx.txt           |  4 ++
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h       |  3 ++
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c  | 42 +++++++++++++++++++
 3 files changed, 49 insertions(+)

-- 
2.26.2

[PATCH 1/2] iio: imu: st_lsm6dsx: add vdd-vddio voltage regulator

[Lorenzo Bianconi]

Like all other ST sensors, st_lsm6dsx devices have VDD and VDDIO power
lines. Introduce voltage regulators to control them.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h      |  3 ++
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 42 ++++++++++++++++++++
 2 files changed, 45 insertions(+)

diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index 1f31657a7a0e..4b4ec39d4400 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -13,6 +13,7 @@
 
 #include <linux/device.h>
 #include <linux/iio/iio.h>
+#include <linux/regulator/consumer.h>
 
 #define ST_LSM6DS3_DEV_NAME	"lsm6ds3"
 #define ST_LSM6DS3H_DEV_NAME	"lsm6ds3h"
@@ -368,6 +369,7 @@ struct st_lsm6dsx_sensor {
  * struct st_lsm6dsx_hw - ST IMU MEMS hw instance
  * @dev: Pointer to instance of struct device (I2C or SPI).
  * @regmap: Register map of the device.
+ * @regulators: VDD/VDDIO voltage regulators.
  * @irq: Device interrupt line (I2C or SPI).
  * @fifo_lock: Mutex to prevent concurrent access to the hw FIFO.
  * @conf_lock: Mutex to prevent concurrent FIFO configuration update.
@@ -390,6 +392,7 @@ struct st_lsm6dsx_sensor {
 struct st_lsm6dsx_hw {
 	struct device *dev;
 	struct regmap *regmap;
+	struct regulator_bulk_data regulators[2];
 	int irq;
 
 	struct mutex fifo_lock;
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index da91f5e7e86d..8b9b724121a8 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -2549,6 +2549,40 @@ static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw)
 	return 0;
 }
 
+static int st_lsm6dsx_init_regulators(struct device *dev)
+{
+	struct st_lsm6dsx_hw *hw = dev_get_drvdata(dev);
+	int err;
+
+	/* vdd-vddio power regulators */
+	hw->regulators[0].supply = "vdd";
+	hw->regulators[1].supply = "vddio";
+	err = devm_regulator_bulk_get(dev, ARRAY_SIZE(hw->regulators),
+				      hw->regulators);
+	if (err) {
+		dev_err(dev, "failed to get regulators: %d\n", err);
+		return err;
+	}
+
+	err = regulator_bulk_enable(ARRAY_SIZE(hw->regulators),
+				    hw->regulators);
+	if (err) {
+		dev_err(dev, "failed to enable regulators: %d\n", err);
+		return err;
+	}
+
+	msleep(50);
+
+	return 0;
+}
+
+static void st_lsm6dsx_chip_uninit(void *data)
+{
+	struct st_lsm6dsx_hw *hw = data;
+
+	regulator_bulk_disable(ARRAY_SIZE(hw->regulators), hw->regulators);
+}
+
 int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
 		     struct regmap *regmap)
 {
@@ -2568,6 +2602,14 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
 	mutex_init(&hw->conf_lock);
 	mutex_init(&hw->page_lock);
 
+	err = st_lsm6dsx_init_regulators(dev);
+	if (err)
+		return err;
+
+	err = devm_add_action_or_reset(dev, st_lsm6dsx_chip_uninit, hw);
+	if (err)
+		return err;
+
 	hw->buff = devm_kzalloc(dev, ST_LSM6DSX_BUFF_SIZE, GFP_KERNEL);
 	if (!hw->buff)
 		return -ENOMEM;
-- 
2.26.2

Re: [PATCH 1/2] iio: imu: st_lsm6dsx: add vdd-vddio voltage regulator

[Jonathan Cameron]

On Tue, 17 Nov 2020 16:11:37 +0100
Lorenzo Bianconi <lorenzo@kernel.org> wrote:

> Like all other ST sensors, st_lsm6dsx devices have VDD and VDDIO power
> lines. Introduce voltage regulators to control them.
> 
> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Looks good to me.

> ---
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h      |  3 ++
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 42 ++++++++++++++++++++
>  2 files changed, 45 insertions(+)
> 
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> index 1f31657a7a0e..4b4ec39d4400 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> @@ -13,6 +13,7 @@
>  
>  #include <linux/device.h>
>  #include <linux/iio/iio.h>
> +#include <linux/regulator/consumer.h>
>  
>  #define ST_LSM6DS3_DEV_NAME	"lsm6ds3"
>  #define ST_LSM6DS3H_DEV_NAME	"lsm6ds3h"
> @@ -368,6 +369,7 @@ struct st_lsm6dsx_sensor {
>   * struct st_lsm6dsx_hw - ST IMU MEMS hw instance
>   * @dev: Pointer to instance of struct device (I2C or SPI).
>   * @regmap: Register map of the device.
> + * @regulators: VDD/VDDIO voltage regulators.
>   * @irq: Device interrupt line (I2C or SPI).
>   * @fifo_lock: Mutex to prevent concurrent access to the hw FIFO.
>   * @conf_lock: Mutex to prevent concurrent FIFO configuration update.
> @@ -390,6 +392,7 @@ struct st_lsm6dsx_sensor {
>  struct st_lsm6dsx_hw {
>  	struct device *dev;
>  	struct regmap *regmap;
> +	struct regulator_bulk_data regulators[2];
>  	int irq;
>  
>  	struct mutex fifo_lock;
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> index da91f5e7e86d..8b9b724121a8 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> @@ -2549,6 +2549,40 @@ static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw)
>  	return 0;
>  }
>  
> +static int st_lsm6dsx_init_regulators(struct device *dev)
> +{
> +	struct st_lsm6dsx_hw *hw = dev_get_drvdata(dev);
> +	int err;
> +
> +	/* vdd-vddio power regulators */
> +	hw->regulators[0].supply = "vdd";
> +	hw->regulators[1].supply = "vddio";
> +	err = devm_regulator_bulk_get(dev, ARRAY_SIZE(hw->regulators),
> +				      hw->regulators);
> +	if (err) {
> +		dev_err(dev, "failed to get regulators: %d\n", err);
> +		return err;
> +	}
> +
> +	err = regulator_bulk_enable(ARRAY_SIZE(hw->regulators),
> +				    hw->regulators);
> +	if (err) {
> +		dev_err(dev, "failed to enable regulators: %d\n", err);
> +		return err;
> +	}
> +
> +	msleep(50);
> +
> +	return 0;
> +}
> +
> +static void st_lsm6dsx_chip_uninit(void *data)
> +{
> +	struct st_lsm6dsx_hw *hw = data;
> +
> +	regulator_bulk_disable(ARRAY_SIZE(hw->regulators), hw->regulators);
> +}
> +
>  int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
>  		     struct regmap *regmap)
>  {
> @@ -2568,6 +2602,14 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
>  	mutex_init(&hw->conf_lock);
>  	mutex_init(&hw->page_lock);
>  
> +	err = st_lsm6dsx_init_regulators(dev);
> +	if (err)
> +		return err;
> +
> +	err = devm_add_action_or_reset(dev, st_lsm6dsx_chip_uninit, hw);
> +	if (err)
> +		return err;
> +
>  	hw->buff = devm_kzalloc(dev, ST_LSM6DSX_BUFF_SIZE, GFP_KERNEL);
>  	if (!hw->buff)
>  		return -ENOMEM;

[PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: introduce vdd-vddio regulators bindings

[Lorenzo Bianconi]

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
 Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
index 7c6742d3e992..bc3448df9647 100644
--- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
+++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
@@ -20,6 +20,10 @@ Required properties:
 - reg: i2c address of the sensor / spi cs line
 
 Optional properties:
+- vdd-supply: an optional regulator that needs to be on to provide VDD
+  power to the sensor.
+- vddio-supply: an optional regulator that needs to be on to provide the
+  VDD IO power to the sensor.
 - st,drdy-int-pin: the pin on the package that will be used to signal
   "data ready" (valid values: 1 or 2).
 - st,pullups : enable/disable internal i2c controller pullup resistors.
-- 
2.26.2

Re: [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: introduce vdd-vddio regulators bindings

[Jonathan Cameron]

On Tue, 17 Nov 2020 16:11:38 +0100
Lorenzo Bianconi <lorenzo@kernel.org> wrote:

> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> ---
>  Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
> index 7c6742d3e992..bc3448df9647 100644
> --- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
> +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
> @@ -20,6 +20,10 @@ Required properties:
>  - reg: i2c address of the sensor / spi cs line
>  
>  Optional properties:
> +- vdd-supply: an optional regulator that needs to be on to provide VDD
> +  power to the sensor.
> +- vddio-supply: an optional regulator that needs to be on to provide the
> +  VDD IO power to the sensor.
>  - st,drdy-int-pin: the pin on the package that will be used to signal
>    "data ready" (valid values: 1 or 2).
>  - st,pullups : enable/disable internal i2c controller pullup resistors.

Hi Lorenzo,

Please could you rebase this on top of 
https://lore.kernel.org/linux-iio/20201031184854.745828-13-jic23@kernel.org/

Which does a yaml conversion of this file.

I'm working my way through backlog of those this week so will pick that up
at some point very soon.

I'll resend a v2 of some patches in those series, but only those where there
are outstanding comments that aren't trivial.

(Rob's acked most with a few requested tweaks).

Thanks,

Jonathan

Re: [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: introduce vdd-vddio regulators bindings

[Lorenzo Bianconi]

[-- Attachment #1: Type: text/plain, Size: 1831 bytes --]

> On Tue, 17 Nov 2020 16:11:38 +0100
> Lorenzo Bianconi <lorenzo@kernel.org> wrote:
> 
> > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> > ---
> >  Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 4 ++++
> >  1 file changed, 4 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
> > index 7c6742d3e992..bc3448df9647 100644
> > --- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
> > +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
> > @@ -20,6 +20,10 @@ Required properties:
> >  - reg: i2c address of the sensor / spi cs line
> >  
> >  Optional properties:
> > +- vdd-supply: an optional regulator that needs to be on to provide VDD
> > +  power to the sensor.
> > +- vddio-supply: an optional regulator that needs to be on to provide the
> > +  VDD IO power to the sensor.
> >  - st,drdy-int-pin: the pin on the package that will be used to signal
> >    "data ready" (valid values: 1 or 2).
> >  - st,pullups : enable/disable internal i2c controller pullup resistors.
> 
> Hi Lorenzo,
> 
> Please could you rebase this on top of 
> https://lore.kernel.org/linux-iio/20201031184854.745828-13-jic23@kernel.org/
> 
> Which does a yaml conversion of this file.

Hi Jonathan,

sure, no worries. I was quite sure the yaml conversion was merged but then I
discovered it was not :) I will post v2 soon.

Regards,
Lorenzo

> 
> I'm working my way through backlog of those this week so will pick that up
> at some point very soon.
> 
> I'll resend a v2 of some patches in those series, but only those where there
> are outstanding comments that aren't trivial.
> 
> (Rob's acked most with a few requested tweaks).
> 
> Thanks,
> 
> Jonathan

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]