From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from saturn.retrosnub.co.uk ([178.18.118.26]:41794 "EHLO saturn.retrosnub.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752590AbcHOQL7 (ORCPT ); Mon, 15 Aug 2016 12:11:59 -0400 Subject: Re: [PATCH v2] iio: humidity: hdc100x: add HDC1000 and HDC1008 to Kconfig To: Alison Schofield References: <20160725185001.GA5322@d830.WORKGROUP> Cc: mranostay@gmail.com, knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net, linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org From: Jonathan Cameron Message-ID: Date: Mon, 15 Aug 2016 17:11:57 +0100 MIME-Version: 1.0 In-Reply-To: <20160725185001.GA5322@d830.WORKGROUP> Content-Type: text/plain; charset=windows-1252 Sender: linux-iio-owner@vger.kernel.org List-Id: linux-iio@vger.kernel.org On 25/07/16 19:50, Alison Schofield wrote: > hdc100x supports Texas Instruments HDC1000 and HDC1008 relative > humidity and temperature sensors. Add these product names to > Kconfig. > > Signed-off-by: Alison Schofield > Cc: Daniel Baluta Thanks for sorting this out! Applied to the togreg branch of iio.git - pushed out as testing etc etc. Jonathan > --- > Changes in v2: > - removed names from i2c_device_id struct. (keep as hdc100x only) > - updated commit msg and changelog > > drivers/iio/humidity/Kconfig | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig > index 738a86d..f155386 100644 > --- a/drivers/iio/humidity/Kconfig > +++ b/drivers/iio/humidity/Kconfig > @@ -26,11 +26,11 @@ config HDC100X > tristate "TI HDC100x relative humidity and temperature sensor" > depends on I2C > help > - Say yes here to build support for the TI HDC100x series of > - relative humidity and temperature sensors. > + Say yes here to build support for the Texas Instruments > + HDC1000 and HDC1008 relative humidity and temperature sensors. > > - To compile this driver as a module, choose M here: the module > - will be called hdc100x. > + To compile this driver as a module, choose M here: the module > + will be called hdc100x. > > config HTU21 > tristate "Measurement Specialties HTU21 humidity & temperature sensor" >