linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: William Breathitt Gray <vilhelm.gray@gmail.com>
To: linus.walleij@linaro.org
Cc: andy.shevchenko@gmail.com, linux-gpio@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
	William Breathitt Gray <vilhelm.gray@gmail.com>
Subject: [PATCH v3 4/8] gpio: pcie-idio-24: Implement get_multiple/set_multiple callbacks
Date: Sat, 17 Mar 2018 11:51:07 -0400	[thread overview]
Message-ID: <ef5f9e834305494017af8b3d6f3b22ab7aad1dee.1521301345.git.vilhelm.gray@gmail.com> (raw)
In-Reply-To: <cover.1521301345.git.vilhelm.gray@gmail.com>

The ACCES I/O PCIe-IDIO-24 series of devices provides 24
optically-isolated digital I/O accessed via six 8-bit ports. Since eight
input lines are acquired on a single port input read -- and similarly
eight output lines are set on a single port output write -- the
PCIe-IDIO-24 GPIO driver may improve multiple I/O reads/writes by
utilizing a get_multiple/set_multiple callbacks. This patch implements
the idio_24_gpio_get_multiple function which serves as the respective
get_multiple callback, and implements the idio_24_gpio_set_multiple
function which serves as the respective set_multiple callback.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
 drivers/gpio/gpio-pcie-idio-24.c | 117 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 117 insertions(+)

diff --git a/drivers/gpio/gpio-pcie-idio-24.c b/drivers/gpio/gpio-pcie-idio-24.c
index f666e2e69074..412aca253c76 100644
--- a/drivers/gpio/gpio-pcie-idio-24.c
+++ b/drivers/gpio/gpio-pcie-idio-24.c
@@ -15,6 +15,7 @@
  * This driver supports the following ACCES devices: PCIe-IDIO-24,
  * PCIe-IDI-24, PCIe-IDO-24, and PCIe-IDIO-12.
  */
+#include <linux/bitmap.h>
 #include <linux/bitops.h>
 #include <linux/device.h>
 #include <linux/errno.h>
@@ -193,6 +194,61 @@ static int idio_24_gpio_get(struct gpio_chip *chip, unsigned int offset)
 	return !!(ioread8(&idio24gpio->reg->ttl_in0_7) & offset_mask);
 }
 
+static int idio_24_gpio_get_multiple(struct gpio_chip *chip,
+	unsigned long *mask, unsigned long *bits)
+{
+	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
+	size_t i;
+	const unsigned int gpio_reg_size = 8;
+	unsigned int bits_offset;
+	size_t word_index;
+	unsigned int word_offset;
+	unsigned long word_mask;
+	const unsigned long port_mask = GENMASK(gpio_reg_size, 0);
+	unsigned long port_state;
+	u8 __iomem ports[] = {
+		idio24gpio->reg->out0_7, idio24gpio->reg->out8_15,
+		idio24gpio->reg->out16_23, idio24gpio->reg->in0_7,
+		idio24gpio->reg->in8_15, idio24gpio->reg->in16_23
+	};
+	const unsigned long out_mode_mask = BIT(1);
+
+	/* clear bits array to a clean slate */
+	bitmap_zero(bits, chip->ngpio);
+
+	/* get bits are evaluated a gpio port register at a time */
+	for (i = 0; i < ARRAY_SIZE(ports); i++) {
+		/* gpio offset in bits array */
+		bits_offset = i * gpio_reg_size;
+
+		/* word index for bits array */
+		word_index = BIT_WORD(bits_offset);
+
+		/* gpio offset within current word of bits array */
+		word_offset = bits_offset % BITS_PER_LONG;
+
+		/* mask of get bits for current gpio within current word */
+		word_mask = mask[word_index] & (port_mask << word_offset);
+		if (!word_mask) {
+			/* no get bits in this port so skip to next one */
+			continue;
+		}
+
+		/* read bits from current gpio port (port 6 is TTL GPIO) */
+		if (i < 6)
+			port_state = ioread8(ports + i);
+		else if (ioread8(&idio24gpio->reg->ctl) & out_mode_mask)
+			port_state = ioread8(&idio24gpio->reg->ttl_out0_7);
+		else
+			port_state = ioread8(&idio24gpio->reg->ttl_in0_7);
+
+		/* store acquired bits at respective bits array offset */
+		bits[word_index] |= port_state << word_offset;
+	}
+
+	return 0;
+}
+
 static void idio_24_gpio_set(struct gpio_chip *chip, unsigned int offset,
 	int value)
 {
@@ -234,6 +290,65 @@ static void idio_24_gpio_set(struct gpio_chip *chip, unsigned int offset,
 	raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
 }
 
+static void idio_24_gpio_set_multiple(struct gpio_chip *chip,
+	unsigned long *mask, unsigned long *bits)
+{
+	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
+	size_t i;
+	unsigned long bits_offset;
+	unsigned long gpio_mask;
+	const unsigned int gpio_reg_size = 8;
+	const unsigned long port_mask = GENMASK(gpio_reg_size, 0);
+	unsigned long flags;
+	unsigned int out_state;
+	u8 __iomem ports[] = {
+		idio24gpio->reg->out0_7, idio24gpio->reg->out8_15,
+		idio24gpio->reg->out16_23
+	};
+	const unsigned long out_mode_mask = BIT(1);
+	const unsigned int ttl_offset = 48;
+	const size_t ttl_i = BIT_WORD(ttl_offset);
+	const unsigned int word_offset = ttl_offset % BITS_PER_LONG;
+	const unsigned long ttl_mask = (mask[ttl_i] >> word_offset) & port_mask;
+	const unsigned long ttl_bits = (bits[ttl_i] >> word_offset) & ttl_mask;
+
+	/* set bits are processed a gpio port register at a time */
+	for (i = 0; i < ARRAY_SIZE(ports); i++) {
+		/* gpio offset in bits array */
+		bits_offset = i * gpio_reg_size;
+
+		/* check if any set bits for current port */
+		gpio_mask = (*mask >> bits_offset) & port_mask;
+		if (!gpio_mask) {
+			/* no set bits for this port so move on to next port */
+			continue;
+		}
+
+		raw_spin_lock_irqsave(&idio24gpio->lock, flags);
+
+		/* process output lines */
+		out_state = ioread8(ports + i) & ~gpio_mask;
+		out_state |= (*bits >> bits_offset) & gpio_mask;
+		iowrite8(out_state, ports + i);
+
+		raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+	}
+
+	/* check if setting TTL lines and if they are in output mode */
+	if (!ttl_mask || !(ioread8(&idio24gpio->reg->ctl) & out_mode_mask))
+		return;
+
+	/* handle TTL output */
+	raw_spin_lock_irqsave(&idio24gpio->lock, flags);
+
+	/* process output lines */
+	out_state = ioread8(&idio24gpio->reg->ttl_out0_7) & ~ttl_mask;
+	out_state |= ttl_bits;
+	iowrite8(out_state, &idio24gpio->reg->ttl_out0_7);
+
+	raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+}
+
 static void idio_24_irq_ack(struct irq_data *data)
 {
 }
@@ -397,7 +512,9 @@ static int idio_24_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	idio24gpio->chip.direction_input = idio_24_gpio_direction_input;
 	idio24gpio->chip.direction_output = idio_24_gpio_direction_output;
 	idio24gpio->chip.get = idio_24_gpio_get;
+	idio24gpio->chip.get_multiple = idio_24_gpio_get_multiple;
 	idio24gpio->chip.set = idio_24_gpio_set;
+	idio24gpio->chip.set_multiple = idio_24_gpio_set_multiple;
 
 	raw_spin_lock_init(&idio24gpio->lock);
 
-- 
2.16.2


  parent reply	other threads:[~2018-03-17 15:51 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-17 15:49 [PATCH v3 0/8] Implement get_multiple for ACCES and PC/104 drivers William Breathitt Gray
2018-03-17 15:49 ` [PATCH v3 1/8] iio: stx104: Implement get_multiple callback William Breathitt Gray
2018-03-17 18:22   ` Jonathan Cameron
2018-03-17 18:51   ` Andy Shevchenko
2018-03-17 19:15     ` William Breathitt Gray
2018-03-17 15:50 ` [PATCH v3 2/8] gpio: 104-idio-16: " William Breathitt Gray
2018-03-21 15:32   ` Andy Shevchenko
2018-03-21 16:04     ` William Breathitt Gray
2018-03-17 15:50 ` [PATCH v3 3/8] gpio: pci-idio-16: " William Breathitt Gray
2018-03-21 17:45   ` Andy Shevchenko
2018-03-21 18:49     ` William Breathitt Gray
2018-03-17 15:51 ` William Breathitt Gray [this message]
2018-03-17 15:51 ` [PATCH v3 5/8] gpio: 104-dio-48e: " William Breathitt Gray
2018-03-17 15:51 ` [PATCH v3 6/8] gpio: 104-idi-48: " William Breathitt Gray
2018-03-17 15:51 ` [PATCH v3 7/8] gpio: gpio-mm: " William Breathitt Gray
2018-03-17 15:52 ` [PATCH v3 8/8] gpio: ws16c48: " William Breathitt Gray

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ef5f9e834305494017af8b3d6f3b22ab7aad1dee.1521301345.git.vilhelm.gray@gmail.com \
    --to=vilhelm.gray@gmail.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).