Linux Input/HID development
 help / color / mirror / Atom feed
From: Hyunhee Kim <hyunhee.kim@samsung.com>
To: 'Mark Brown' <broonie@kernel.org>,
	dmitry.torokhov@gmail.com, peter.ujfalusi@ti.com,
	wfp5p@virginia.edu, linux-input@vger.kernel.org,
	linux-kernel@vger.kernel.org, akpm@linux-foundation.org
Cc: "'hyunhee.kim'" <hyunhee.kim@samsung.com>, kyungmin.park@samsung.com
Subject: [PATCH v4] Input: add regulator haptic driver
Date: Fri, 25 Oct 2013 15:29:51 +0900	[thread overview]
Message-ID: <002601ced14b$9c412330$d4c36990$%kim@samsung.com> (raw)
In-Reply-To: <20131024133836.GG18506@sirena.org.uk>

From: Hyunhee Kim <hyunhee.kim@samsung.com>
Date: Wed, 9 Oct 2013 16:21:36 +0900
Subject: [PATCH] Input: add regulator haptic driver

Signed-off-by: Hyunhee Kim <hyunhee.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Aristeu Rozanski <aris@ruivo.org>

---
 drivers/input/misc/Kconfig            |   10 ++
 drivers/input/misc/Makefile           |    1 +
 drivers/input/misc/regulator-haptic.c |  187
+++++++++++++++++++++++++++++++++
 3 files changed, 198 insertions(+)
 create mode 100644 drivers/input/misc/regulator-haptic.c

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index bb698e1..21b4d5b 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -82,6 +82,16 @@ config INPUT_ARIZONA_HAPTICS
 	  To compile this driver as a module, choose M here: the
 	  module will be called arizona-haptics.
 
+config INPUT_REGULATOR_HAPTIC
+	tristate "support haptics on/off using regulator"
+	select INPUT_FF_MEMLESS
+	help
+	  Say Y to enable support for the haptic module. Haptic can be
+	  enabled/disabled by regulator.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called regulator-haptic.
+
 config INPUT_BMA150
 	tristate "BMA150/SMB380 acceleration sensor support"
 	depends on I2C
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index d7fc17f..106f0bc 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_INPUT_ADXL34X_I2C)		+=
adxl34x-i2c.o
 obj-$(CONFIG_INPUT_ADXL34X_SPI)		+= adxl34x-spi.o
 obj-$(CONFIG_INPUT_APANEL)		+= apanel.o
 obj-$(CONFIG_INPUT_ARIZONA_HAPTICS)	+= arizona-haptics.o
+obj-$(CONFIG_INPUT_REGULATOR_HAPTIC)	+= regulator-haptic.o
 obj-$(CONFIG_INPUT_ATI_REMOTE2)		+= ati_remote2.o
 obj-$(CONFIG_INPUT_ATLAS_BTNS)		+= atlas_btns.o
 obj-$(CONFIG_INPUT_BFIN_ROTARY)		+= bfin_rotary.o
diff --git a/drivers/input/misc/regulator-haptic.c
b/drivers/input/misc/regulator-haptic.c
new file mode 100644
index 0000000..bab2ad9
--- /dev/null
+++ b/drivers/input/misc/regulator-haptic.c
@@ -0,0 +1,187 @@
+/*
+ * Regulator haptic driver
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *
+ * Author: Hyunhee Kim <hyunhee.kim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/regulator/driver.h>
+
+struct regulator_haptic {
+	struct device *dev;
+	struct input_dev *input_dev;
+	struct work_struct work;
+	bool enabled;
+	struct regulator *regulator;
+	struct mutex mutex;
+	int level;
+};
+
+static void regulator_haptic_enable(struct regulator_haptic *haptic)
+{
+	int ret;
+
+	if (!haptic->enabled) {
+		ret = regulator_enable(haptic->regulator);
+		if (ret)
+			dev_err(haptic->dev, "failed to enable
regulator\n");
+		haptic->enabled = true;
+	}
+}
+
+static void regulator_haptic_disable(struct regulator_haptic *haptic)
+{
+	int ret;
+
+	if (haptic->enabled) {
+		ret = regulator_disable(haptic->regulator);
+		if (ret)
+			dev_err(haptic->dev, "failed to disable
regulator\n");
+		haptic->enabled = false;
+	}
+}
+
+static void regulator_haptic_work(struct work_struct *work)
+{
+	struct regulator_haptic *haptic = container_of(work,
+						       struct
regulator_haptic,
+						       work);
+	mutex_lock(&haptic->mutex);
+	if (haptic->level)
+		regulator_haptic_enable(haptic);
+	else
+		regulator_haptic_disable(haptic);
+	mutex_unlock(&haptic->mutex);
+}
+
+static int regulator_haptic_play(struct input_dev *input, void *data,
+				struct ff_effect *effect)
+{
+	struct regulator_haptic *haptic = input_get_drvdata(input);
+
+	haptic->level = effect->u.rumble.strong_magnitude;
+	if (!haptic->level)
+		haptic->level = effect->u.rumble.weak_magnitude;
+	schedule_work(&haptic->work);
+
+	return 0;
+}
+
+static void regulator_haptic_close(struct input_dev *input)
+{
+	struct regulator_haptic *haptic = input_get_drvdata(input);
+
+	cancel_work_sync(&haptic->work);
+	regulator_haptic_disable(haptic);
+}
+
+static int regulator_haptic_probe(struct platform_device *pdev)
+{
+	struct regulator_haptic *haptic;
+	struct input_dev *input_dev;
+	int error;
+
+	haptic = devm_kzalloc(&pdev->dev, sizeof(*haptic), GFP_KERNEL);
+	if (!haptic) {
+		dev_err(&pdev->dev, "unable to allocate memory for
haptic\n");
+		return -ENOMEM;
+	}
+
+	input_dev = input_allocate_device();
+
+	if (!input_dev) {
+		dev_err(&pdev->dev, "unable to allocate memory\n");
+		return  -ENOMEM;
+	}
+
+	INIT_WORK(&haptic->work, regulator_haptic_work);
+	mutex_init(&haptic->mutex);
+	haptic->input_dev = input_dev;
+	haptic->dev = &pdev->dev;
+	haptic->regulator = regulator_get(&pdev->dev, "haptic");
+
+	if (IS_ERR(haptic->regulator)) {
+		error = PTR_ERR(haptic->regulator);
+		dev_err(&pdev->dev, "unable to get regulator, err: %d\n",
+			error);
+		goto err_ifree_mem;
+	}
+
+	haptic->input_dev->name = "regulator:haptic";
+	haptic->input_dev->dev.parent = &pdev->dev;
+	haptic->input_dev->close = regulator_haptic_close;
+	haptic->enabled = false;
+	input_set_drvdata(haptic->input_dev, haptic);
+	input_set_capability(haptic->input_dev, EV_FF, FF_RUMBLE);
+
+	error = input_ff_create_memless(input_dev, NULL,
+				      regulator_haptic_play);
+	if (error) {
+		dev_err(&pdev->dev,
+			"input_ff_create_memless() failed: %d\n",
+			error);
+		goto err_put_regulator;
+	}
+
+	error = input_register_device(haptic->input_dev);
+	if (error) {
+		dev_err(&pdev->dev,
+			"couldn't register input device: %d\n",
+			error);
+		goto err_destroy_ff;
+	}
+
+	platform_set_drvdata(pdev, haptic);
+
+	return 0;
+
+err_destroy_ff:
+	input_ff_destroy(haptic->input_dev);
+err_put_regulator:
+	regulator_put(haptic->regulator);
+err_ifree_mem:
+	input_free_device(haptic->input_dev);
+
+	return error;
+}
+
+static int regulator_haptic_remove(struct platform_device *pdev)
+{
+	struct regulator_haptic *haptic = platform_get_drvdata(pdev);
+
+	input_unregister_device(haptic->input_dev);
+	regulator_put(haptic->regulator);
+
+	return 0;
+}
+
+static struct of_device_id regulator_haptic_dt_match[] = {
+	{ .compatible = "linux,regulator-haptic" },
+	{},
+};
+
+static struct platform_driver regulator_haptic_driver = {
+	.driver		= {
+		.name	= "regulator-haptic",
+		.owner	= THIS_MODULE,
+		.of_match_table = regulator_haptic_dt_match,
+	},
+
+	.probe		= regulator_haptic_probe,
+	.remove		= regulator_haptic_remove,
+};
+module_platform_driver(regulator_haptic_driver);
+
+MODULE_ALIAS("platform:regulator-haptic");
+MODULE_DESCRIPTION("Regulator haptic driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Hyunhee Kim <hyunhee.kim@samsung.com>");
-- 
1.7.9.5



  reply	other threads:[~2013-10-25  6:30 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-11  2:22 [PATCH] Input: add regulator haptic driver hyunhee.kim
2013-10-24 13:38 ` Mark Brown
2013-10-25  6:29   ` Hyunhee Kim [this message]
2013-10-25  8:29     ` [PATCH v4] " Mark Brown
2013-10-28  8:31       ` [PATCH v5] " Hyunhee Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='002601ced14b$9c412330$d4c36990$%kim@samsung.com' \
    --to=hyunhee.kim@samsung.com \
    --cc=akpm@linux-foundation.org \
    --cc=broonie@kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peter.ujfalusi@ti.com \
    --cc=wfp5p@virginia.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox