From: Kukjin Kim <kgene.kim@samsung.com>
To: 'Joonyoung Shim' <jy0922.shim@samsung.com>, dmitry.torokhov@gmail.com
Cc: linux-samsung-soc@vger.kernel.org, kyungmin.park@samsung.com,
ben-linux@fluff.org, linux-input@vger.kernel.org,
ch.naveen@samsung.com, linux-arm-kernel@lists.infradead.org
Subject: RE: [PATCH v6 3/3] input: samsung-keypad - Add samsung keypad driver
Date: Wed, 21 Jul 2010 15:21:23 +0900 [thread overview]
Message-ID: <007901cb289c$f4763d70$dd62b850$%kim@samsung.com> (raw)
In-Reply-To: <4C4688BE.1080409@samsung.com>
Joonyoung Shim wrote:
>
> Hi, Dmitry.
>
> On 7/9/2010 4:39 PM, Joonyoung Shim wrote:
> > On 7/9/2010 4:07 PM, Kukjin Kim wrote:
> >> Joonyoung Shim wrote:
> >>> On 7/7/2010 8:52 AM, Kukjin Kim wrote:
> >>>> Joonyoung Shim wrote:
> >>>>> Hi, Naveen.
> >>>>>
> >>>>> On 6/28/2010 8:33 PM, Joonyoung Shim wrote:
> >>>>>> This patch adds support for keypad driver running on Samsung cpus. This
> >>>>>> driver is tested on GONI and Aquila board using S5PC110 cpu.
> >>>>>>
> >>>>>> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
> >>>>>> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> >>>>>> ---
> >>>>>> drivers/input/keyboard/Kconfig | 9 +
> >>>>>> drivers/input/keyboard/Makefile | 1 +
> >>>>>> drivers/input/keyboard/samsung-keypad.c | 491
> >>>>> +++++++++++++++++++++++++++++++
> >>>>>> 3 files changed, 501 insertions(+), 0 deletions(-)
> >>>>>> create mode 100644 drivers/input/keyboard/samsung-keypad.c
> >>>>>>
> >>>>> Could you please test this v6 keypad driver on your various targets?
> >>>> Hi,
> >>>>
> >>>> I received the test result from Naveen.
> >>>> And now he is debugging about that.
> >>>>
> >>>> ..his e-mail client has some problem..so I replied...
> >>>>
> >>>> ---
> >>>> From: Naveen Ch
> >>>>
> >>>> I've tested with v6 patches and they are working fine on SMDK6410,
> SMDKC100
> >>> and SMDKV210, except for some header inclusion (linux/sched.h) in
> samsung-
> >>> keypad.c.
> >>>> The build breaking error is like following:
> >>>> (make s5pc100_defconfig and select input->keypad->samsung keypad)
> >>>>
> >>>> drivers/input/keyboard/samsung-keypad.c: In function 'samsung_keypad_irq':
> >>>> drivers/input/keyboard/samsung-keypad.c:170: error:
> 'TASK_UNINTERRUPTIBLE'
> >>> undeclared (first use in this function)
> >>>> drivers/input/keyboard/samsung-keypad.c:170: error: (Each undeclared
> identifier
> >>> is reported only once
> >>>> drivers/input/keyboard/samsung-keypad.c:170: error: for each function it
> appears
> >>> in.)
> >>>> drivers/input/keyboard/samsung-keypad.c:170: error: implicit declaration of
> >>> function 'schedule_timeout'
> >>>> drivers/input/keyboard/samsung-keypad.c: In function
> 'samsung_keypad_stop':
> >>>> drivers/input/keyboard/samsung-keypad.c:202: error: 'TASK_NORMAL'
> >>> undeclared (first use in this function)
> >>>> make[3]: *** [drivers/input/keyboard/samsung-keypad.o] Error 1
> >>>>
> >>> This error occurs on s5pc100_defconfig having disabled CONFIG_PREEMPT
> >>> option. I think sched.h should be included to remove like this
> >>> dependency in driver, are there other ways?
> >> I'm not sure root cause is that. But as you said, I think need inclusion it for
> prevent the problem.
> >> Actually didn't happen it before..so maybe the some core functions have
> moved between rc-3 and earlier versions...
> >
> > The sched.h is included by below path.
> >
> > interrupt.h -> hardirq.h -> smp_lock.h -> sched.h
> >
> > The smp_lock.h in hardirq.h is included if CONFIG_PREEMPT is defined.
> > The samsung keypad driver haven't needed including sched.h before
> > Dmitry's patch is applied..
> >
> >> Anyway, if no any issues, could you please re-submit updated it soon?
> >
> > I haven't get yet Dmitry's review of v6 patch set, so i am waiting it.
> >
>
> Ping.
>
> Do you have any feedback? If ok, i want to go to input tree or samsung
> tree these added sched.h including.
With including sched.h and Naveen's keypad support patches for SMDK6410, SMDKC100 and SMDKV210:
[ch.naveen@samsung.com: tested on SMDK6410, SMDKC100, and SMDKV210]
Tested-by: Naveen Krishna Ch <ch.naveen@samsung.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
next prev parent reply other threads:[~2010-07-21 6:22 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-28 11:33 [PATCH v6 1/3] ARM: SAMSUNG: Add keypad device support Joonyoung Shim
2010-06-28 11:33 ` [PATCH v6 2/3] ARM: S5PV210: Add keypad device helpers Joonyoung Shim
2010-06-28 11:33 ` [PATCH v6 3/3] input: samsung-keypad - Add samsung keypad driver Joonyoung Shim
2010-07-06 7:58 ` Joonyoung Shim
2010-07-06 23:52 ` Kukjin Kim
2010-07-07 1:28 ` Joonyoung Shim
2010-07-09 7:07 ` Kukjin Kim
2010-07-09 7:39 ` Joonyoung Shim
2010-07-21 5:42 ` Joonyoung Shim
2010-07-21 6:21 ` Kukjin Kim [this message]
2010-07-21 8:07 ` Dmitry Torokhov
2010-07-21 9:01 ` Joonyoung Shim
2010-07-21 12:39 ` Kukjin Kim
2010-08-02 3:09 ` Joonyoung Shim
2010-08-02 3:38 ` Kukjin Kim
2010-08-02 4:41 ` Joonyoung Shim
2010-08-02 5:12 ` Kukjin Kim
2010-08-02 5:52 ` Joonyoung Shim
2010-08-02 6:30 ` Kukjin Kim
2010-08-02 7:58 ` Dmitry Torokhov
2010-08-03 2:10 ` Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='007901cb289c$f4763d70$dd62b850$%kim@samsung.com' \
--to=kgene.kim@samsung.com \
--cc=ben-linux@fluff.org \
--cc=ch.naveen@samsung.com \
--cc=dmitry.torokhov@gmail.com \
--cc=jy0922.shim@samsung.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).