* [PATCH] Input: /input/mouse/elan_i2c_core.c Fix some Asus touchapod which casue TP no funciton sometimes, the patch detect some specific touchpad and run a special initialize
@ 2016-07-08 12:12 KT Liao
2016-07-09 0:24 ` Dmitry Torokhov
0 siblings, 1 reply; 5+ messages in thread
From: KT Liao @ 2016-07-08 12:12 UTC (permalink / raw)
To: linux-kernel, linux-input, dmitry.torokhov; +Cc: phoenix, kt.liao
Signed-off-by: KT Liao <kt.liao@emc.com.tw>
---
drivers/input/mouse/elan_i2c_core.c | 81 +++++++++++++++++++++++++++++--------
1 file changed, 65 insertions(+), 16 deletions(-)
diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c
index 2f58985..1c200fb 100644
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -3,8 +3,8 @@
*
* Copyright (c) 2013 ELAN Microelectronics Corp.
*
- * Author: 林政維 (Duson Lin) <dusonlin@emc.com.tw>
- * Version: 1.6.0
+ * Author: KT Liao <kt.liao@emc.com.tw>
+ * Version: 1.6.2
*
* Based on cyapa driver:
* copyright (c) 2011-2012 Cypress Semiconductor, Inc.
@@ -40,7 +40,7 @@
#include "elan_i2c.h"
#define DRIVER_NAME "elan_i2c"
-#define ELAN_DRIVER_VERSION "1.6.1"
+#define ELAN_DRIVER_VERSION "1.6.2"
#define ELAN_VENDOR_ID 0x04f3
#define ETP_MAX_PRESSURE 255
#define ETP_FWIDTH_REDUCE 90
@@ -95,6 +95,8 @@ struct elan_tp_data {
bool baseline_ready;
};
+static int check_ASUS_special_fw(struct elan_tp_data *data);
+
static int elan_get_fwinfo(u8 iap_version, u16 *validpage_count,
u16 *signature_address)
{
@@ -210,21 +212,40 @@ static int __elan_initialize(struct elan_tp_data *data)
return error;
}
- data->mode |= ETP_ENABLE_ABS;
- error = data->ops->set_mode(client, data->mode);
- if (error) {
- dev_err(&client->dev,
- "failed to switch to absolute mode: %d\n", error);
- return error;
- }
+ /* If it's the special FW, it need a different flow for mode change.*/
+ if (check_ASUS_special_fw(data)) {
+ error = data->ops->sleep_control(client, false);
+ if (error) {
+ dev_err(&client->dev,
+ "failed to wake device up: %d\n", error);
+ return error;
+ }
- error = data->ops->sleep_control(client, false);
- if (error) {
- dev_err(&client->dev,
- "failed to wake device up: %d\n", error);
- return error;
- }
+ msleep(200);
+ data->mode |= ETP_ENABLE_ABS;
+ error = data->ops->set_mode(client, data->mode);
+ if (error) {
+ dev_err(&client->dev,
+ "failed to switch to absolute mode: %d\n", error);
+ return error;
+ }
+ } else {
+ data->mode |= ETP_ENABLE_ABS;
+ error = data->ops->set_mode(client, data->mode);
+ if (error) {
+ dev_err(&client->dev,
+ "failed to switch to absolute mode: %d\n", error);
+ return error;
+ }
+
+ error = data->ops->sleep_control(client, false);
+ if (error) {
+ dev_err(&client->dev,
+ "failed to wake device up: %d\n", error);
+ return error;
+ }
+ }
return 0;
}
@@ -757,6 +778,34 @@ out:
return retval;
}
+static int check_ASUS_special_fw(struct elan_tp_data *data)
+{
+ struct i2c_client *client = data->client;
+ int error;
+
+ error = data->ops->get_product_id(client, &data->product_id);
+ if (error)
+ return false;
+
+ error = data->ops->get_sm_version(client, &data->ic_type,
+ &data->sm_version);
+ if (error)
+ return false;
+
+ if (data->ic_type == 0x0E) {
+ switch (data->product_id) {
+ case 0x05:
+ case 0x06:
+ case 0x07:
+ case 0x09:
+ case 0x13:
+ return true;
+ default:
+ return false;
+ }
+ }
+ return false;
+}
static DEVICE_ATTR_WO(acquire);
static DEVICE_ATTR_RO(min);
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH] Input: /input/mouse/elan_i2c_core.c Fix some Asus touchapod which casue TP no funciton sometimes, the patch detect some specific touchpad and run a special initialize
2016-07-08 12:12 [PATCH] Input: /input/mouse/elan_i2c_core.c Fix some Asus touchapod which casue TP no funciton sometimes, the patch detect some specific touchpad and run a special initialize KT Liao
@ 2016-07-09 0:24 ` Dmitry Torokhov
2016-07-11 12:40 ` 廖崇榮
0 siblings, 1 reply; 5+ messages in thread
From: Dmitry Torokhov @ 2016-07-09 0:24 UTC (permalink / raw)
To: KT Liao; +Cc: linux-kernel, linux-input, phoenix, kt.liao
Hi KT,
On Fri, Jul 08, 2016 at 08:12:09PM +0800, KT Liao wrote:
> Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Please make sure you add a blan line between change subject and the rest
of description. Then git send-email will compose your email properly
instead of lumping everything into one long line subject.
> ---
> drivers/input/mouse/elan_i2c_core.c | 81 +++++++++++++++++++++++++++++--------
> 1 file changed, 65 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c
> index 2f58985..1c200fb 100644
> --- a/drivers/input/mouse/elan_i2c_core.c
> +++ b/drivers/input/mouse/elan_i2c_core.c
> @@ -3,8 +3,8 @@
> *
> * Copyright (c) 2013 ELAN Microelectronics Corp.
> *
> - * Author: 林政維 (Duson Lin) <dusonlin@emc.com.tw>
> - * Version: 1.6.0
> + * Author: KT Liao <kt.liao@emc.com.tw>
> + * Version: 1.6.2
> *
> * Based on cyapa driver:
> * copyright (c) 2011-2012 Cypress Semiconductor, Inc.
> @@ -40,7 +40,7 @@
> #include "elan_i2c.h"
>
> #define DRIVER_NAME "elan_i2c"
> -#define ELAN_DRIVER_VERSION "1.6.1"
> +#define ELAN_DRIVER_VERSION "1.6.2"
> #define ELAN_VENDOR_ID 0x04f3
> #define ETP_MAX_PRESSURE 255
> #define ETP_FWIDTH_REDUCE 90
> @@ -95,6 +95,8 @@ struct elan_tp_data {
> bool baseline_ready;
> };
>
> +static int check_ASUS_special_fw(struct elan_tp_data *data);
> +
> static int elan_get_fwinfo(u8 iap_version, u16 *validpage_count,
> u16 *signature_address)
> {
> @@ -210,21 +212,40 @@ static int __elan_initialize(struct elan_tp_data *data)
> return error;
> }
>
> - data->mode |= ETP_ENABLE_ABS;
> - error = data->ops->set_mode(client, data->mode);
> - if (error) {
> - dev_err(&client->dev,
> - "failed to switch to absolute mode: %d\n", error);
> - return error;
> - }
> + /* If it's the special FW, it need a different flow for mode change.*/
> + if (check_ASUS_special_fw(data)) {
> + error = data->ops->sleep_control(client, false);
> + if (error) {
> + dev_err(&client->dev,
> + "failed to wake device up: %d\n", error);
> + return error;
> + }
>
> - error = data->ops->sleep_control(client, false);
> - if (error) {
> - dev_err(&client->dev,
> - "failed to wake device up: %d\n", error);
> - return error;
> - }
> + msleep(200);
>
> + data->mode |= ETP_ENABLE_ABS;
> + error = data->ops->set_mode(client, data->mode);
> + if (error) {
> + dev_err(&client->dev,
> + "failed to switch to absolute mode: %d\n", error);
> + return error;
> + }
> + } else {
> + data->mode |= ETP_ENABLE_ABS;
> + error = data->ops->set_mode(client, data->mode);
> + if (error) {
> + dev_err(&client->dev,
> + "failed to switch to absolute mode: %d\n", error);
> + return error;
> + }
> +
> + error = data->ops->sleep_control(client, false);
> + if (error) {
> + dev_err(&client->dev,
> + "failed to wake device up: %d\n", error);
> + return error;
> + }
> + }
> return 0;
> }
>
> @@ -757,6 +778,34 @@ out:
> return retval;
> }
>
> +static int check_ASUS_special_fw(struct elan_tp_data *data)
> +{
> + struct i2c_client *client = data->client;
> + int error;
> +
> + error = data->ops->get_product_id(client, &data->product_id);
> + if (error)
> + return false;
> +
> + error = data->ops->get_sm_version(client, &data->ic_type,
> + &data->sm_version);
> + if (error)
> + return false;
That means we'd be fetching product ID and IC type twice when
initializing the device. Can we come with a way to do it once?
> +
> + if (data->ic_type == 0x0E) {
Maybe
if (dat->ic_type != 0x0e)
return false;
? Then you would not need to indent the switch statement.
> + switch (data->product_id) {
> + case 0x05:
> + case 0x06:
> + case 0x07:
> + case 0x09:
> + case 0x13:
> + return true;
> + default:
> + return false;
> + }
> + }
> + return false;
> +}
>
> static DEVICE_ATTR_WO(acquire);
> static DEVICE_ATTR_RO(min);
> --
> 2.7.4
>
Thanks.
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 5+ messages in thread* RE: [PATCH] Input: /input/mouse/elan_i2c_core.c Fix some Asus touchapod which casue TP no funciton sometimes, the patch detect some specific touchpad and run a special initialize
2016-07-09 0:24 ` Dmitry Torokhov
@ 2016-07-11 12:40 ` 廖崇榮
2016-07-11 17:03 ` 'Dmitry Torokhov'
0 siblings, 1 reply; 5+ messages in thread
From: 廖崇榮 @ 2016-07-11 12:40 UTC (permalink / raw)
To: 'Dmitry Torokhov', 'KT Liao'
Cc: linux-kernel, linux-input, phoenix
Hi Dmitry,
-----Original Message-----
From: Dmitry Torokhov [mailto:dmitry.torokhov@gmail.com]
Sent: Saturday, July 09, 2016 8:25 AM
To: KT Liao
Cc: linux-kernel@vger.kernel.org; linux-input@vger.kernel.org; phoenix@emc.com.tw; kt.liao@emc.com.tw
Subject: Re: [PATCH] Input: /input/mouse/elan_i2c_core.c Fix some Asus touchapod which casue TP no funciton sometimes, the patch detect some specific touchpad and run a special initialize
Hi KT,
On Fri, Jul 08, 2016 at 08:12:09PM +0800, KT Liao wrote:
> Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Please make sure you add a blan line between change subject and the rest of description. Then git send-email will compose your email properly instead of lumping everything into one long line subject.
[KT] :Sorry, I will fix it in the later upstream
> ---
> drivers/input/mouse/elan_i2c_core.c | 81
> +++++++++++++++++++++++++++++--------
> 1 file changed, 65 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/input/mouse/elan_i2c_core.c
> b/drivers/input/mouse/elan_i2c_core.c
> index 2f58985..1c200fb 100644
> --- a/drivers/input/mouse/elan_i2c_core.c
> +++ b/drivers/input/mouse/elan_i2c_core.c
> @@ -3,8 +3,8 @@
> *
> * Copyright (c) 2013 ELAN Microelectronics Corp.
> *
> - * Author: 林政維 (Duson Lin) <dusonlin@emc.com.tw>
> - * Version: 1.6.0
> + * Author: KT Liao <kt.liao@emc.com.tw>
> + * Version: 1.6.2
> *
> * Based on cyapa driver:
> * copyright (c) 2011-2012 Cypress Semiconductor, Inc.
> @@ -40,7 +40,7 @@
> #include "elan_i2c.h"
>
> #define DRIVER_NAME "elan_i2c"
> -#define ELAN_DRIVER_VERSION "1.6.1"
> +#define ELAN_DRIVER_VERSION "1.6.2"
> #define ELAN_VENDOR_ID 0x04f3
> #define ETP_MAX_PRESSURE 255
> #define ETP_FWIDTH_REDUCE 90
> @@ -95,6 +95,8 @@ struct elan_tp_data {
> bool baseline_ready;
> };
>
> +static int check_ASUS_special_fw(struct elan_tp_data *data);
> +
> static int elan_get_fwinfo(u8 iap_version, u16 *validpage_count,
> u16 *signature_address)
> {
> @@ -210,21 +212,40 @@ static int __elan_initialize(struct elan_tp_data *data)
> return error;
> }
>
> - data->mode |= ETP_ENABLE_ABS;
> - error = data->ops->set_mode(client, data->mode);
> - if (error) {
> - dev_err(&client->dev,
> - "failed to switch to absolute mode: %d\n", error);
> - return error;
> - }
> + /* If it's the special FW, it need a different flow for mode change.*/
> + if (check_ASUS_special_fw(data)) {
> + error = data->ops->sleep_control(client, false);
> + if (error) {
> + dev_err(&client->dev,
> + "failed to wake device up: %d\n", error);
> + return error;
> + }
>
> - error = data->ops->sleep_control(client, false);
> - if (error) {
> - dev_err(&client->dev,
> - "failed to wake device up: %d\n", error);
> - return error;
> - }
> + msleep(200);
>
> + data->mode |= ETP_ENABLE_ABS;
> + error = data->ops->set_mode(client, data->mode);
> + if (error) {
> + dev_err(&client->dev,
> + "failed to switch to absolute mode: %d\n", error);
> + return error;
> + }
> + } else {
> + data->mode |= ETP_ENABLE_ABS;
> + error = data->ops->set_mode(client, data->mode);
> + if (error) {
> + dev_err(&client->dev,
> + "failed to switch to absolute mode: %d\n", error);
> + return error;
> + }
> +
> + error = data->ops->sleep_control(client, false);
> + if (error) {
> + dev_err(&client->dev,
> + "failed to wake device up: %d\n", error);
> + return error;
> + }
> + }
> return 0;
> }
>
> @@ -757,6 +778,34 @@ out:
> return retval;
> }
>
> +static int check_ASUS_special_fw(struct elan_tp_data *data) {
> + struct i2c_client *client = data->client;
> + int error;
> +
> + error = data->ops->get_product_id(client, &data->product_id);
> + if (error)
> + return false;
> +
> + error = data->ops->get_sm_version(client, &data->ic_type,
> + &data->sm_version);
> + if (error)
> + return false;
That means we'd be fetching product ID and IC type twice when initializing the device. Can we come with a way to do it once?
[KT]:Because the elan_query_device_info() is behind the elan_initialize(). That's why I fetching product ID and IC type in the elan_initialize()
I will discuss with FW team and then execute elan_query_device_info() first to get product_id and ic_type.
> +
> + if (data->ic_type == 0x0E) {
Maybe
if (dat->ic_type != 0x0e)
return false;
? Then you would not need to indent the switch statement.
[KT] : OK, fix in the next patch
> + switch (data->product_id) {
> + case 0x05:
> + case 0x06:
> + case 0x07:
> + case 0x09:
> + case 0x13:
> + return true;
> + default:
> + return false;
> + }
> + }
> + return false;
> +}
>
> static DEVICE_ATTR_WO(acquire);
> static DEVICE_ATTR_RO(min);
> --
> 2.7.4
>
Thanks.
--
Dmitry
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] Input: /input/mouse/elan_i2c_core.c Fix some Asus touchapod which casue TP no funciton sometimes, the patch detect some specific touchpad and run a special initialize
2016-07-11 12:40 ` 廖崇榮
@ 2016-07-11 17:03 ` 'Dmitry Torokhov'
2016-07-12 14:19 ` 廖崇榮
0 siblings, 1 reply; 5+ messages in thread
From: 'Dmitry Torokhov' @ 2016-07-11 17:03 UTC (permalink / raw)
To: 廖崇榮
Cc: 'KT Liao', linux-kernel, linux-input, phoenix
On Mon, Jul 11, 2016 at 08:40:58PM +0800, 廖崇榮 wrote:
> > +
> > + error = data->ops->get_sm_version(client, &data->ic_type,
> > + &data->sm_version);
> > + if (error)
> > + return false;
>
> That means we'd be fetching product ID and IC type twice when initializing the device. Can we come with a way to do it once?
> [KT]:Because the elan_query_device_info() is behind the elan_initialize(). That's why I fetching product ID and IC type in the elan_initialize()
> I will discuss with FW team and then execute elan_query_device_info() first to get product_id and ic_type.
We might need to split fetching product ID and IC type form the rest of
the device info.
Thanks.
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: [PATCH] Input: /input/mouse/elan_i2c_core.c Fix some Asus touchapod which casue TP no funciton sometimes, the patch detect some specific touchpad and run a special initialize
2016-07-11 17:03 ` 'Dmitry Torokhov'
@ 2016-07-12 14:19 ` 廖崇榮
0 siblings, 0 replies; 5+ messages in thread
From: 廖崇榮 @ 2016-07-12 14:19 UTC (permalink / raw)
To: 'Dmitry Torokhov'
Cc: 'KT Liao', linux-kernel, linux-input, phoenix
Hi Dmitry,
-----Original Message-----
From: 'Dmitry Torokhov' [mailto:dmitry.torokhov@gmail.com]
Sent: Tuesday, July 12, 2016 1:03 AM
To: 廖崇榮
Cc: 'KT Liao'; linux-kernel@vger.kernel.org; linux-input@vger.kernel.org; phoenix@emc.com.tw
Subject: Re: [PATCH] Input: /input/mouse/elan_i2c_core.c Fix some Asus touchapod which casue TP no funciton sometimes, the patch detect some specific touchpad and run a special initialize
On Mon, Jul 11, 2016 at 08:40:58PM +0800, 廖崇榮 wrote:
> > +
> > + error = data->ops->get_sm_version(client, &data->ic_type,
> > + &data->sm_version);
> > + if (error)
> > + return false;
>
> That means we'd be fetching product ID and IC type twice when initializing the device. Can we come with a way to do it once?
> [KT]:Because the elan_query_device_info() is behind the elan_initialize(). That's why I fetching product ID and IC type in the elan_initialize()
> I will discuss with FW team and then execute elan_query_device_info() first to get product_id and ic_type.
We might need to split fetching product ID and IC type form the rest of the device info.
[KT] : ok, I will extract "product ID" and "IC type" to another query-device function. and it won't change original flow too much.
Thanks.
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2016-07-12 14:19 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-07-08 12:12 [PATCH] Input: /input/mouse/elan_i2c_core.c Fix some Asus touchapod which casue TP no funciton sometimes, the patch detect some specific touchpad and run a special initialize KT Liao
2016-07-09 0:24 ` Dmitry Torokhov
2016-07-11 12:40 ` 廖崇榮
2016-07-11 17:03 ` 'Dmitry Torokhov'
2016-07-12 14:19 ` 廖崇榮
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).