linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Osipenko <digetx@gmail.com>
To: "Wang, Jiada" <jiada_wang@mentor.com>,
	nick@shmanahar.org, dmitry.torokhov@gmail.com, jikos@kernel.org,
	benjamin.tissoires@redhat.com, bsz@semihalf.com
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
	erosca@de.adit-jv.com, Andrew_Gabbasov@mentor.com
Subject: Re: [PATCH v10 43/55] dt-bindings: input: atmel: support to set max bytes transferred
Date: Tue, 7 Apr 2020 17:47:07 +0300	[thread overview]
Message-ID: <008d019c-2de7-4fe4-0c22-2668312f808b@gmail.com> (raw)
In-Reply-To: <9b98a3fc-b7ee-fc01-dc5c-248df507d4a2@mentor.com>

07.04.2020 12:27, Wang, Jiada пишет:
..
>> Is this a software (firmware) limitation which varies from version to
>> version?
>>
> 
> the timeout issue trying to be addressed in this patch is from software,
> one of our board a Serializer/Deserializer bridge exists between the SoC
> (imx6) and the Atmel touch controller.
> imx6 i2c controller driver has a timeout value(100ms) for each i2c
> transaction,
> Large i2c read transaction failed to complete within this timeout value
> and therefore imx6 i2c controller driver aborts the transaction
> and returns failure.
> 
> Therefore this patch was created to split the large i2c transaction into
> smaller chunks which can complete
> within the timeout defined by i2c controller driver.

Isn't it possible to use the max_read/write_len of the generic struct
i2c_adapter_quirks for limiting the transfer size?

BTW, it looks like the i.MX I2C driver doesn't specify the
i2c_adapter_quirks, which probably needs to be fixed.

  reply	other threads:[~2020-04-07 14:47 UTC|newest]

Thread overview: 87+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-31 10:49 [PATCH v10 00/55] atmel_mxt_ts misc Jiada Wang
2020-03-31 10:49 ` [PATCH v10 01/55] Input: introduce input_mt_report_slot_inactive Jiada Wang
2020-03-31 10:49 ` [PATCH v10 02/55] Input: atmel_mxt_ts - rework sysfs init/remove Jiada Wang
2020-03-31 10:49 ` [PATCH v10 03/55] Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary Jiada Wang
2020-03-31 10:50 ` [PATCH v10 04/55] Input: atmel_mxt_ts - split large i2c transfers into blocks Jiada Wang
2020-03-31 10:50 ` [PATCH v10 05/55] Input: atmel_mxt_ts - output status from T48 Noise Supression Jiada Wang
2020-03-31 10:50 ` [PATCH v10 06/55] Input: atmel_mxt_ts - output status from T42 Touch Suppression Jiada Wang
2020-03-31 10:50 ` [PATCH v10 07/55] Input: atmel_mxt_ts - implement T9 vector/orientation support Jiada Wang
2020-03-31 10:50 ` [PATCH v10 08/55] Input: atmel_mxt_ts - implement T15 Key Array support Jiada Wang
2020-03-31 10:50 ` [PATCH v10 09/55] Input: atmel_mxt_ts - handle reports from T47 Stylus object Jiada Wang
2020-03-31 10:50 ` [PATCH v10 10/55] Input: atmel_mxt_ts - implement support for T107 active stylus Jiada Wang
2020-03-31 10:50 ` [PATCH v10 11/55] Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msgs Jiada Wang
2020-03-31 10:50 ` [PATCH v10 12/55] Input: atmel_mxt_ts - release touch state during suspend Jiada Wang
2020-03-31 10:50 ` [PATCH v10 13/55] dt-bindings: input: atmel: add suspend mode support Jiada Wang
2020-04-01 15:42   ` Dmitry Osipenko
2020-04-02  8:28     ` Wang, Jiada
2020-03-31 10:50 ` [PATCH v10 14/55] Input: atmel_mxt_ts - add regulator control support Jiada Wang
2020-03-31 10:50 ` [PATCH v10 15/55] Input: atmel_mxt_ts - report failures in suspend/resume Jiada Wang
2020-03-31 10:50 ` [PATCH v10 16/55] Input: atmel_mxt_ts - allow specification of firmware file name Jiada Wang
2020-03-31 10:50 ` [PATCH v10 17/55] Input: atmel_mxt_ts: Rename mxt_fw_version_show to fw_version_show Jiada Wang
2020-03-31 10:50 ` [PATCH v10 18/55] Input: atmel_mxt_ts: Rename mxt_hw_version_show to hw_version_show Jiada Wang
2020-04-10 21:46   ` Dmitry Osipenko
2020-04-15 13:08     ` Wang, Jiada
2020-03-31 10:50 ` [PATCH v10 19/55] Input: atmel_mxt_ts: rename mxt_update_fw_store to update_fw_store Jiada Wang
2020-03-31 10:50 ` [PATCH v10 20/55] Input: atmel_mxt_ts - handle cfg filename via pdata/sysfs Jiada Wang
2020-04-07 14:56   ` Dmitry Osipenko
2020-04-09  9:11     ` Wang, Jiada
2020-03-31 10:50 ` [PATCH v10 21/55] dt-bindings: input: atmel: provide name of configuration file Jiada Wang
2020-03-31 10:50 ` [PATCH v10 22/55] Input: atmel_mxt_ts - allow input name to be specified in platform data Jiada Wang
2020-03-31 10:50 ` [PATCH v10 23/55] dt-bindings: input: atmel: support to specify input name Jiada Wang
2020-03-31 10:50 ` [PATCH v10 24/55] Input: atmel_mxt_ts - add config checksum attribute to sysfs Jiada Wang
2020-03-31 10:50 ` [PATCH v10 25/55] Input: atmel_mxt_ts - refactor firmware flash to extract context into struct Jiada Wang
2020-03-31 10:50 ` [PATCH v10 26/55] Input: atmel_mxt_ts - refactor code to enter bootloader into separate func Jiada Wang
2020-03-31 10:50 ` [PATCH v10 27/55] Input: atmel_mxt_ts - combine bootloader version query with probe Jiada Wang
2020-03-31 10:50 ` [PATCH v10 28/55] Input: atmel_mxt_ts - improve bootloader state machine handling Jiada Wang
2020-03-31 10:50 ` [PATCH v10 29/55] Input: atmel_mxt_ts - rename bl_completion to chg_completion Jiada Wang
2020-03-31 10:50 ` [PATCH v10 30/55] Input: atmel_mxt_ts - make bootloader interrupt driven Jiada Wang
2020-03-31 10:50 ` [PATCH v10 31/55] Input: atmel_mxt_ts - delay enabling IRQ when not using regulators Jiada Wang
2020-04-10 22:38   ` Dmitry Osipenko
2020-04-15 14:44     ` Wang, Jiada
2020-04-18 13:59       ` Dmitry Osipenko
2020-03-31 10:50 ` [PATCH v10 32/55] Input: atmel_mxt_ts - implement I2C retries Jiada Wang
2020-03-31 10:50 ` [PATCH v10 33/55] Input: atmel_mxt_ts - orientation is not present in hover Jiada Wang
2020-03-31 10:50 ` [PATCH v10 34/55] Input: atmel_mxt_ts - implement debug output for messages Jiada Wang
2020-03-31 10:50 ` [PATCH v10 35/55] Input: atmel_mxt_ts - implement improved debug message interface Jiada Wang
2020-03-31 10:50 ` [PATCH v10 36/55] Input: atmel_mxt_ts - eliminate data->raw_info_block Jiada Wang
2020-03-31 10:50 ` [PATCH v10 37/55] Input: atmel_mxt_ts - Change call-points of mxt_free_* functions Jiada Wang
2020-03-31 10:50 ` [PATCH v10 38/55] Input: atmel_mxt_ts - rely on calculated_crc rather than file config_crc Jiada Wang
2020-03-31 10:50 ` [PATCH v10 39/55] input: atmel_mxt_ts: export GPIO reset line via sysfs Jiada Wang
2020-03-31 10:50 ` [PATCH v10 40/55] input: atmel_mxt_ts: Add Missing Delay for reset handling of Atmel touch panel controller in detachable displays Jiada Wang
2020-03-31 10:50 ` [PATCH v10 41/55] Input: atmel_mxt_ts: Add support for run self-test routine Jiada Wang
2020-03-31 10:50 ` [PATCH v10 42/55] Input: atmel_mxt_ts: Limit the max bytes transferred in an i2c transaction Jiada Wang
2020-03-31 10:50 ` [PATCH v10 43/55] dt-bindings: input: atmel: support to set max bytes transferred Jiada Wang
2020-04-01 14:38   ` Dmitry Osipenko
2020-04-07  9:27     ` Wang, Jiada
2020-04-07 14:47       ` Dmitry Osipenko [this message]
2020-04-09  6:25         ` Wang, Jiada
2020-04-09 15:10           ` Dmitry Osipenko
2020-04-10  6:53             ` Wang, Jiada
2020-03-31 10:50 ` [PATCH v10 44/55] Input: atmel_mxt_ts: return error from mxt_process_messages_until_invalid() Jiada Wang
2020-03-31 10:50 ` [PATCH v10 45/55] Input: Atmel: improve error handling in mxt_start() Jiada Wang
2020-03-31 10:50 ` [PATCH v10 46/55] Input: Atmel: improve error handling in mxt_initialize() Jiada Wang
2020-03-31 10:50 ` [PATCH v10 47/55] Input: Atmel: improve error handling in mxt_update_cfg() Jiada Wang
2020-03-31 10:50 ` [PATCH v10 48/55] Input: Atmel: Improve error handling in mxt_initialize_input_device() Jiada Wang
2020-03-31 10:50 ` [PATCH v10 49/55] Input: Atmel: handle ReportID "0x00" while processing T5 messages Jiada Wang
2020-03-31 10:50 ` [PATCH v10 50/55] Input: Atmel: use T44 object to process " Jiada Wang
2020-03-31 10:50 ` [PATCH v10 51/55] Input: atmel_mxt_ts: use gpiod_set_value_cansleep for reset pin Jiada Wang
2020-03-31 10:50 ` [PATCH v10 52/55] input: touchscreen: atmel_mxt_ts: Added sysfs entry for touchscreen status Jiada Wang
2020-03-31 15:08   ` Dmitry Osipenko
2020-04-01 12:51     ` Wang, Jiada
2020-04-01 14:33       ` Dmitry Osipenko
2020-04-01 16:10         ` Dmitry Osipenko
2020-04-06  6:59           ` Wang, Jiada
2020-03-31 10:50 ` [PATCH v10 53/55] input: atmel_mxt_ts: added sysfs interface to update atmel T38 data Jiada Wang
2020-03-31 10:50 ` [PATCH v10 54/55] Input: atmel_mxt_ts: Implement synchronization during various operation Jiada Wang
2020-04-01 16:04   ` Dmitry Osipenko
2020-04-02 11:50     ` Wang, Jiada
2020-04-02 13:24       ` Dmitry Osipenko
2020-04-02 13:44         ` Dmitry Osipenko
2020-04-06  4:07           ` Wang, Jiada
2020-04-02 14:00         ` Dmitry Osipenko
2020-04-02 14:07           ` Dmitry Osipenko
2020-04-06  4:18           ` Wang, Jiada
2020-04-07 15:00             ` Dmitry Osipenko
2020-04-03  8:39         ` Wang, Jiada
2020-04-04 21:38           ` Dmitry Osipenko
2020-03-31 10:50 ` [PATCH v10 55/55] Input: atmel_mxt_ts - Fix compilation warning Jiada Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=008d019c-2de7-4fe4-0c22-2668312f808b@gmail.com \
    --to=digetx@gmail.com \
    --cc=Andrew_Gabbasov@mentor.com \
    --cc=benjamin.tissoires@redhat.com \
    --cc=bsz@semihalf.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=erosca@de.adit-jv.com \
    --cc=jiada_wang@mentor.com \
    --cc=jikos@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nick@shmanahar.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).