[PATCH v3 2/3] input: Add DT binding documentation for Colibri VF50 touchscreen

[Sanchayan Maity <maitysanchayan@gmail.com>]

This adds device tree binding documentation for the Colibri VF50
touchscreen driver.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
---
 .../bindings/input/touchscreen/colibri-vf50-ts.txt | 32 ++++++++++++++++++++++
 1 file changed, 32 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt

diff --git a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
new file mode 100644
index 0000000..3e0efac
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
@@ -0,0 +1,32 @@
+* Toradex Colibri VF50 Touchscreen driver
+
+Required Properties:
+- compatible must be toradex,vf50-touchctrl
+- io-channels: adc channels being used by the Colibri VF50 module
+- xp-gpios: FET gate driver for input of X+
+- xm-gpios: FET gate driver for input of X-
+- yp-gpios: FET gate driver for input of Y+
+- ym-gpios: FET gate driver for input of Y-
+- pen-detect-gpios: GPIO for pen detect irq
+- pinctrl-names: "idle", "default", "gpios"
+- pinctrl-0: pinctrl node for idle state gpio pinmux
+- pinctrl-1: pinctrl node for touch detection state pinmux
+- pinctrl-2: pinctrl node for gpios functioning as FET gate drivers
+
+Example:
+
+	touchctrl: vf50_touchctrl {
+		compatible = "toradex,vf50-touchctrl";
+		io-channels = <&adc1 0>,<&adc0 0>,
+				<&adc0 1>,<&adc1 2>;
+		xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		pen-detect-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "idle","default","gpios";
+		pinctrl-0 = <&pinctrl_touchctrl_idle>;
+		pinctrl-1 = <&pinctrl_touchctrl_default>;
+		pinctrl-2 = <&pinctrl_touchctrl_gpios>;
+		status = "disabled";
+	};
-- 
2.5.0