From: Hans de Goede <hdegoede@redhat.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Bastien Nocera <hadess@hadess.net>
Cc: linux-input@vger.kernel.org
Subject: Re: [PATCH 0/7] Input: goodix - Add support for controllers without flash
Date: Thu, 1 Jul 2021 16:29:08 +0200 [thread overview]
Message-ID: <04b72c55-8122-73b2-a37a-271a510db2e1@redhat.com> (raw)
In-Reply-To: <20210428114608.101795-1-hdegoede@redhat.com>
Hi,
On 4/28/21 1:46 PM, Hans de Goede wrote:
> Hi All,
>
> A while ago I bought a Glavey TM800A550L tablet. This is a Bay Trail (x86)
> tablet which comes with Android from the factory.
>
> It is mostly just another Bay Trail tablet, but the way the Goodix
> touchscreen on it works is interesting. The controller needs to have
> firmware uploaded to it before it will work. After that it pretty much
> works 100% the same as any other Goodix touchscreen controller.
>
> I've described this patch-set in the Subject as "Add support for
> controllers without flash", but I suspect that the Goodix controllers
> used on Bay Trail devices which ship with Windows pre-installed may also
> lack flash; and that the Windows version of the BIOS-es on these devices
> does the upload for us. Anyways just something which I'm wondering about,
> these patches are necessary to make things work regardless.
>
> These patches should also be useful for supporting the Goodix controllers
> on some ARM based devices, as some of those need the OS to upload the
> firmware too AFAIK.
>
> Note patch 7/7 is included to get an overview of the entire set.
> I'll merge that one myself through the pdx86 tree. Patches 1-6 are
> intended for merging through the input tree.
Self NACK for this series I just found out that the controller on
a Chuwi Hi13 gets mis-indentified as needing fw upload even though
that is not the case. I'll send out a fixed v2 rebased on top of
5.14-rc1 once 5.14-rc1 is out.
Regards,
Hans
> Hans de Goede (7):
> Input: goodix - Change goodix_i2c_write() len parameter type to int
> Input: goodix - Add a goodix.h header file
> Input: goodix - Refactor reset handling
> Input: goodix - Push error logging up into i2c_read and i2c_write
> helpers
> Input: goodix - Allow specifying the config filename through a
> "goodix,config-name" device-property
> Input: goodix - Add support for controllers without flash
> platform/x86: touchscreen_dmi: Add info for the Goodix GT912 panel of
> TM800A550L tablets
>
> MAINTAINERS | 3 +-
> drivers/input/touchscreen/Makefile | 3 +-
> drivers/input/touchscreen/goodix.c | 239 +++++------
> drivers/input/touchscreen/goodix.h | 118 ++++++
> drivers/input/touchscreen/goodix_fwupload.c | 437 ++++++++++++++++++++
> drivers/platform/x86/touchscreen_dmi.c | 21 +
> 6 files changed, 684 insertions(+), 137 deletions(-)
> create mode 100644 drivers/input/touchscreen/goodix.h
> create mode 100644 drivers/input/touchscreen/goodix_fwupload.c
>
prev parent reply other threads:[~2021-07-01 14:29 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-28 11:46 [PATCH 0/7] Input: goodix - Add support for controllers without flash Hans de Goede
2021-04-28 11:46 ` [PATCH 1/7] Input: goodix - Change goodix_i2c_write() len parameter type to int Hans de Goede
2021-04-28 11:46 ` [PATCH 2/7] Input: goodix - Add a goodix.h header file Hans de Goede
2021-04-28 11:46 ` [PATCH 3/7] Input: goodix - Refactor reset handling Hans de Goede
2021-04-28 11:46 ` [PATCH 4/7] Input: goodix - Push error logging up into i2c_read and i2c_write helpers Hans de Goede
2021-04-28 11:46 ` [PATCH 5/7] Input: goodix - Allow specifying the config filename through a "goodix,config-name" device-property Hans de Goede
2021-04-28 11:46 ` [PATCH 6/7] Input: goodix - Add support for controllers without flash Hans de Goede
2021-04-28 11:46 ` [PATCH 7/7] platform/x86: touchscreen_dmi: Add info for the Goodix GT912 panel of TM800A550L tablets Hans de Goede
2021-05-21 10:11 ` Hans de Goede
2021-04-28 12:03 ` [PATCH 0/7] Input: goodix - Add support for controllers without flash Bastien Nocera
2021-04-28 13:18 ` Hans de Goede
2021-07-01 14:29 ` Hans de Goede [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=04b72c55-8122-73b2-a37a-271a510db2e1@redhat.com \
--to=hdegoede@redhat.com \
--cc=dmitry.torokhov@gmail.com \
--cc=hadess@hadess.net \
--cc=linux-input@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).