Re: [RFC] [PATCH V2 1/2] input: CMA3000 Accelerometer driver

["Hemanth V" <hemanthv@ti.com>]

----- Original Message ----- 
From: "Jonathan Cameron" <jic23@cam.ac.uk>
To: "Hemanth V" <hemanthv@ti.com>
Cc: <linux-input@vger.kernel.org>; <linux-kernel@vger.kernel.org>; 
<linux-omap@vger.kernel.org>
Sent: Friday, May 21, 2010 5:27 PM
Subject: Re: [RFC] [PATCH V2 1/2] input: CMA3000 Accelerometer driver


> On 05/21/10 07:52, Hemanth V wrote:
>> From: Hemanth V <hemanthv@ti.com>
>> Date: Thu, 20 May 2010 20:18:17 +0530
>> Subject: [PATCH] input: CMA3000 Accelerometer Driver
>>
>> This patch adds support for CMA3000 Tri-axis accelerometer, which
>> supports Motion detect, Measurement and Free fall modes.
>> CMA3000 supports both I2C/SPI bus for communication, currently the
>> driver supports I2C based communication.
>>
>> Driver reports acceleration data through input subsystem and supports
>> sysfs for configuration changes.
>>
>> This is V2 of patch, which fixes open source review comments
>>
>
> Hi,
>
> The driver is nice and clean.
>
> Still leaving aside the long argued question of whether this should be
> in input.  If you care for my views on that there are plenty or other
> threads! There are a few things I'd still like to suggest:
>

Jonathan, Andrew

Is there any way forward for this patch, I am unable to induce any response
from the input maintainer

Thanks
Hemanth