From: Anatolij Gustschin <agust@denx.de>
To: linux-input@vger.kernel.org
Cc: Anatolij Gustschin <agust@denx.de>
Subject: [PATCH] Input: Add TSC2003 touchscreen controller driver
Date: Tue, 21 Apr 2009 17:38:23 +0200 [thread overview]
Message-ID: <1240328303-24115-1-git-send-email-agust@denx.de> (raw)
Supports TSC2003 on socrates board.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
drivers/input/touchscreen/Kconfig | 5 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/tsc2003.c | 442 +++++++++++++++++++++++++++++++++++
3 files changed, 448 insertions(+), 0 deletions(-)
create mode 100644 drivers/input/touchscreen/tsc2003.c
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index b01fd61..defba17 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -366,6 +366,11 @@ config TOUCHSCREEN_WM97XX_ZYLONITE
To compile this driver as a module, choose M here: the
module will be called zylonite-wm97xx.
+config TOUCHSCREEN_TSC2003
+ tristate "TSC2003 touchscreen"
+ help
+ Say Y here to support TSC2003 touchscreen controller.
+
config TOUCHSCREEN_USB_COMPOSITE
tristate "USB Touchscreen Driver"
depends on USB_ARCH_HAS_HCD
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 6700f7b..e965422 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o
+obj-$(CONFIG_TOUCHSCREEN_TSC2003) += tsc2003.o
obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o
obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o
obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.o
diff --git a/drivers/input/touchscreen/tsc2003.c b/drivers/input/touchscreen/tsc2003.c
new file mode 100644
index 0000000..ff6f003
--- /dev/null
+++ b/drivers/input/touchscreen/tsc2003.c
@@ -0,0 +1,442 @@
+/*
+ * drivers/input/touchscreen/tsc2003.c
+ *
+ * Copyright (C) 2008 Anatolij Gustschin <agust@denx.de>
+ * DENX Software Engineering
+ *
+ * Parts of the code are taken from old tsc2003 driver
+ * Copyright (C) 2005 Bill Gatliff <bgat at billgatliff.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/workqueue.h>
+
+#if defined(CONFIG_SOCRATES)
+#include <linux/of_platform.h>
+#endif
+
+#define DRV_NAME "tsc2003"
+
+enum tsc2003_pd {
+ PD_POWERDOWN = 0, /* penirq */
+ PD_IREFOFF_ADCON = 1, /* no penirq */
+ PD_IREFON_ADCOFF = 2, /* penirq */
+ PD_IREFON_ADCON = 3, /* no penirq */
+ PD_PENIRQ_ARM = PD_IREFON_ADCOFF,
+ PD_PENIRQ_DISARM = PD_IREFON_ADCON,
+};
+
+enum tsc2003_m {
+ M_12BIT = 0,
+ M_8BIT = 1
+};
+
+enum tsc2003_cmd {
+ MEASURE_TEMP0 = 0,
+ MEASURE_VBAT1 = 1,
+ MEASURE_IN1 = 2,
+ MEASURE_TEMP1 = 4,
+ MEASURE_VBAT2 = 5,
+ MEASURE_IN2 = 6,
+ ACTIVATE_NX_DRIVERS = 8,
+ ACTIVATE_NY_DRIVERS = 9,
+ ACTIVATE_YNX_DRIVERS = 10,
+ MEASURE_XPOS = 12,
+ MEASURE_YPOS = 13,
+ MEASURE_Z1POS = 14,
+ MEASURE_Z2POS = 15
+};
+
+#define TSC2003_CMD(cn, pdn, m) (((cn) << 4) | ((pdn) << 2) | ((m) << 1))
+
+#define ADC_MAX ((1 << 12) - 1)
+
+struct tsc2003 {
+ struct i2c_client *client;
+ struct input_dev *input;
+ struct device *dev;
+ struct workqueue_struct *ts_workq;
+ struct delayed_work ts_reader;
+ struct mutex mutex;
+ int (*pen_is_down)(void *);
+ void __iomem *map_mem;
+ void __iomem *erqsr;
+ int pen_irq;
+ int pen_irq_on;
+ int pen_down;
+ int poll_interval;
+ int r_x_plate;
+ enum tsc2003_pd pd;
+ enum tsc2003_m m;
+};
+
+static int tsc2003_read(struct tsc2003 *d,
+ enum tsc2003_cmd cmd,
+ enum tsc2003_pd pd, int *val)
+{
+ unsigned char c;
+ unsigned char buf[2];
+ int ret;
+
+ c = TSC2003_CMD(cmd, pd, d->m);
+ dev_dbg(d->dev, "%s-bit cmd 0x%x | ",
+ d->m == M_12BIT ? "12" : "8", c);
+
+ ret = i2c_master_send(d->client, &c, 1);
+ if (ret <= 0)
+ goto err;
+
+ udelay(20);
+
+ ret = i2c_master_recv(d->client, buf, d->m == M_12BIT ? 2 : 1);
+ if (ret <= 0)
+ goto err;
+
+ if (val) {
+ *val = buf[0];
+ if (d->m == M_12BIT) {
+ *val <<= 4;
+ *val += (buf[1] >> 4);
+ pr_debug("val = %d\n", *val);
+ } else
+ pr_debug("val = %d\n", (int)buf[0]);
+ } else
+ pr_debug("buf = %d\n", (int)buf[0]);
+
+ return 0;
+err:
+ dev_err(d->dev, "i2c transfer error %d\n", ret);
+ if (!ret)
+ ret = -EIO;
+ return ret;
+}
+
+static inline int tsc2003_get_xpos(struct tsc2003 *d,
+ enum tsc2003_pd pd, int *x)
+{
+ d->m = M_12BIT;
+ return tsc2003_read(d, MEASURE_XPOS, pd, x);
+}
+
+static inline int tsc2003_get_ypos(struct tsc2003 *d,
+ enum tsc2003_pd pd, int *y)
+{
+ d->m = M_12BIT;
+ return tsc2003_read(d, MEASURE_YPOS, pd, y);
+}
+
+static inline int tsc2003_get_z1(struct tsc2003 *d,
+ enum tsc2003_pd pd, int *z)
+{
+ d->m = M_8BIT;
+ return tsc2003_read(d, MEASURE_Z1POS, pd, z);
+}
+
+static inline int tsc2003_get_z2(struct tsc2003 *d,
+ enum tsc2003_pd pd, int *z)
+{
+ d->m = M_8BIT;
+ return tsc2003_read(d, MEASURE_Z2POS, pd, z);
+}
+
+static inline int tsc2003_get_vbat1(struct tsc2003 *d,
+ enum tsc2003_pd pd, int *t)
+{
+ return tsc2003_read(d, MEASURE_VBAT1, pd, t);
+}
+
+static inline int tsc2003_powerdown(struct tsc2003 *d)
+{
+ return tsc2003_read(d, MEASURE_IN1, PD_POWERDOWN, 0);
+}
+
+#if defined(CONFIG_SOCRATES)
+/* board specific routines for pending pen irq check */
+#define ERQSR_EINT8_MASK 0x00800000
+#define FRR_OFFSET 0x00001000
+#define FRR_ERQSR_OFFSET 0x00000308
+static int socrates_pen_is_down(void *data)
+{
+ struct tsc2003 *d = data;
+
+ return !(in_be32(d->erqsr) & ERQSR_EINT8_MASK);
+}
+
+static int socrates_setup_pen_irq(struct tsc2003 *d)
+{
+ struct device_node *np;
+ struct resource r;
+
+ np = of_find_node_by_type(NULL, "open-pic");
+ if (!np) {
+ dev_err(d->dev, "Can't get open-pic node\n");
+ goto err;
+ }
+ if (of_address_to_resource(np, 0, &r)) {
+ dev_err(d->dev, "Can't get mpic base\n");
+ of_node_put(np);
+ goto err;
+ }
+ of_node_put(np);
+
+ /*
+ * Remap page with Ext. IRQ Summary Register ERQSR.
+ * Page aligned, so remap one page from FRR base.
+ */
+ d->map_mem = ioremap(r.start + FRR_OFFSET, 0x1000);
+ if (d->map_mem == NULL) {
+ dev_err(d->dev,
+ "Can't remap mpic reg. block\n");
+ goto err;
+ }
+ d->pen_is_down = socrates_pen_is_down;
+ d->erqsr = d->map_mem + FRR_ERQSR_OFFSET;
+ return 0;
+err:
+ d->pen_irq = 0;
+ return -EINVAL;
+}
+#endif
+
+irqreturn_t tsc2003_pen_irq(int irq, void *dev_id)
+{
+ struct tsc2003 *d = dev_id;
+
+ dev_dbg(d->dev, "tsc2003 irq, %lu\n", jiffies);
+
+ disable_irq_nosync(d->pen_irq);
+ d->pen_irq_on = 0;
+
+ queue_delayed_work(d->ts_workq, &d->ts_reader, 1);
+
+ return IRQ_HANDLED;
+}
+
+static void tsc2003_ts_sample(struct work_struct *work)
+{
+ struct tsc2003 *d = container_of(work, struct tsc2003, ts_reader.work);
+ unsigned int x = 0, y, z1 = 0, z2 = 0, p = 0;
+
+ /* Sample only if irq is pending or if polling */
+ if ((d->pen_is_down && d->pen_is_down(d)) ||
+ !d->pen_irq) {
+ dev_dbg(d->dev, "sample, %lu\n", jiffies);
+ tsc2003_get_xpos(d, PD_PENIRQ_DISARM, &x);
+ tsc2003_get_ypos(d, PD_PENIRQ_DISARM, &y);
+ tsc2003_get_z1(d, PD_PENIRQ_DISARM, &z1);
+ tsc2003_get_z2(d, PD_PENIRQ_DISARM, &z2);
+
+ if (x && (z1 > 5) && (z2 < 250)) {
+ p = z2;
+ p -= z1;
+ p *= x;
+ p *= d->r_x_plate;
+ p /= z1;
+ p = p >> 8;
+ }
+ }
+ if (p) {
+ dev_dbg(d->dev, "DOWN\n");
+ dev_dbg(d->dev, "x %d, y %d, z1 %d, z2 %d, p %d\n",
+ x, y, z1, z2, p);
+ if (!d->pen_down) {
+ input_report_key(d->input, BTN_TOUCH, 1);
+ d->pen_down = 1;
+ d->poll_interval = HZ / 2;
+ }
+ input_report_abs(d->input, ABS_X, x);
+ input_report_abs(d->input, ABS_Y, y);
+ input_report_abs(d->input, ABS_PRESSURE, p);
+ input_sync(d->input);
+ } else {
+ dev_dbg(d->dev, "UP\n");
+ if (d->pen_down) {
+ d->pen_down = 0;
+ input_report_key(d->input, BTN_TOUCH, 0);
+ input_report_abs(d->input, ABS_PRESSURE, 0);
+ input_sync(d->input);
+ }
+ if (d->pen_irq && !d->pen_irq_on) {
+ tsc2003_get_vbat1(d, PD_PENIRQ_ARM, 0);
+ d->pen_irq_on = 1;
+ enable_irq(d->pen_irq);
+ }
+ if (!d->pen_irq && d->poll_interval < HZ / 2)
+ d->poll_interval += 5;
+ }
+ if (d->pen_down || !d->pen_irq) {
+ dev_dbg(d->dev, "queued\n");
+ queue_delayed_work(d->ts_workq, &d->ts_reader,
+ d->pen_down ? 2 : d->poll_interval);
+ }
+}
+
+static int tsc2003_input_open(struct input_dev *dev)
+{
+ struct tsc2003 *d = input_get_drvdata(dev);
+
+ d->ts_workq = create_singlethread_workqueue(DRV_NAME);
+ if (d->ts_workq == NULL) {
+ dev_err(d->dev, "Failed to create workqueue\n");
+ return -EINVAL;
+ }
+
+ INIT_DELAYED_WORK(&d->ts_reader, tsc2003_ts_sample);
+
+ if (request_irq(d->pen_irq, tsc2003_pen_irq,
+ IRQF_SAMPLE_RANDOM, DRV_NAME, d)) {
+ dev_err(d->dev, "Can't register pen irq\n");
+ d->pen_irq = 0;
+ }
+ if (!d->pen_irq) {
+ dev_info(d->dev, "polling\n");
+ d->poll_interval = HZ / 10;
+ queue_delayed_work(d->ts_workq, &d->ts_reader,
+ d->poll_interval);
+ }
+ return 0;
+}
+
+static void tsc2003_input_close(struct input_dev *dev)
+{
+ struct tsc2003 *d = input_get_drvdata(dev);
+
+ free_irq(d->pen_irq, d);
+ d->pen_down = 0;
+ d->pen_irq_on = 0;
+ cancel_delayed_work_sync(&d->ts_reader);
+ destroy_workqueue(d->ts_workq);
+ return;
+}
+
+static int __devinit tsc2003_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+ struct input_dev *idev;
+ struct tsc2003 *d;
+ int err;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
+ dev_err(&adapter->dev, "doesn't support full I2C\n");
+ err = -EIO;
+ goto exit;
+ }
+
+ d = kzalloc(sizeof(struct tsc2003), GFP_KERNEL);
+ idev = input_allocate_device();
+ if (!d || !idev) {
+ err = -ENOMEM;
+ goto free_mem;
+ }
+
+ d->client = client;
+ d->dev = &client->dev;
+ d->input = idev;
+ d->pen_irq = client->irq;
+ d->pd = PD_PENIRQ_DISARM;
+ d->m = M_8BIT;
+ d->r_x_plate = 747;
+ i2c_set_clientdata(client, d);
+
+ /* try a command, get an ack */
+ err = tsc2003_powerdown(d);
+ if (err < 0) {
+ dev_err(d->dev, "Can't read device 0x%x\n",
+ client->addr);
+ goto free_mem;
+ }
+
+ idev->name = "TSC2003 TouchScreen";
+ idev->phys = DRV_NAME;
+ idev->dev.parent = &client->dev;
+ idev->open = tsc2003_input_open;
+ idev->close = tsc2003_input_close;
+ input_set_drvdata(idev, d);
+
+ set_bit(EV_ABS, idev->evbit);
+ set_bit(EV_KEY, idev->evbit);
+ set_bit(BTN_TOUCH, idev->keybit);
+ input_set_abs_params(idev, ABS_X, 0, ADC_MAX, 0, 0);
+ input_set_abs_params(idev, ABS_Y, 0, ADC_MAX, 0, 0);
+ input_set_abs_params(idev, ABS_PRESSURE, 0, 14000, 0, 0);
+
+ err = input_register_device(idev);
+ if (err)
+ goto free_mem;
+
+#if defined(CONFIG_SOCRATES)
+ if (socrates_setup_pen_irq(d))
+ dev_info(d->dev, "use polling\n");
+#endif
+
+ return 0;
+
+free_mem:
+ input_free_device(idev);
+ kfree(d);
+exit:
+ return err;
+}
+
+static int __devexit tsc2003_remove(struct i2c_client *client)
+{
+ struct tsc2003 *d = i2c_get_clientdata(client);
+
+ if (d->map_mem)
+ iounmap(d->map_mem);
+
+ input_unregister_device(d->input);
+ input_free_device(d->input);
+ i2c_set_clientdata(client, 0);
+ kfree(d);
+ return 0;
+}
+
+static const struct i2c_device_id tsc2003_id[] = {
+ { DRV_NAME, 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, tsc2003_id);
+
+static struct i2c_driver tsc2003_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = tsc2003_probe,
+ .remove = __devexit_p(tsc2003_remove),
+ .id_table = tsc2003_id,
+};
+
+static int __init tsc2003_init(void)
+{
+ return i2c_add_driver(&tsc2003_driver);
+}
+
+static void __exit tsc2003_exit(void)
+{
+ i2c_del_driver(&tsc2003_driver);
+}
+
+module_init(tsc2003_init);
+module_exit(tsc2003_exit);
+
+MODULE_DESCRIPTION("TSC2003 touchscreen controller driver");
+MODULE_LICENSE("GPL");
--
1.5.6.3
next reply other threads:[~2009-04-21 15:38 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-21 15:38 Anatolij Gustschin [this message]
2009-04-28 13:21 ` [PATCH] Input: Add TSC2003 touchscreen controller driver Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1240328303-24115-1-git-send-email-agust@denx.de \
--to=agust@denx.de \
--cc=linux-input@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).