From: Wayne Lin <00601wayne@gmail.com>
To: linux-input@vger.kernel.org
Cc: wayne <wayne.lin@quantatw.com>
Subject: [RFC 17/36] [Driver][Qualcomm 1070][WIFI/BT] Enable Athros WIFI driver
Date: Mon, 26 Jul 2010 16:30:26 +0800 [thread overview]
Message-ID: <1280133045-25945-17-git-send-email-wayne.lin@quantatw.com> (raw)
In-Reply-To: <1280133045-25945-1-git-send-email-wayne.lin@quantatw.com>
From: wayne <wayne.lin@quantatw.com>
---
arch/arm/configs/qsd8650a-st1_5_defconfig | 29 +++++++++++++++++++++++++++--
1 files changed, 27 insertions(+), 2 deletions(-)
diff --git a/arch/arm/configs/qsd8650a-st1_5_defconfig b/arch/arm/configs/qsd8650a-st1_5_defconfig
index 9c8742b..5c9d1e7 100644
--- a/arch/arm/configs/qsd8650a-st1_5_defconfig
+++ b/arch/arm/configs/qsd8650a-st1_5_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.32.9
-# Mon Jun 7 11:41:09 2010
+# Mon Jun 7 13:35:03 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -757,8 +757,14 @@ CONFIG_SMSC911X=y
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
CONFIG_LIBRA_SDIOIF=y
+# CONFIG_ATH_COMMON is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_IWM is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -1710,6 +1716,25 @@ CONFIG_STAGING=y
# CONFIG_IIO is not set
#
+# Chromeos Supplied Third-Party Device Drivers
+#
+CONFIG_ATH6K_LEGACY=m
+CONFIG_AR600x_SD31_XXX=y
+# CONFIG_AR600x_WB31_XXX is not set
+# CONFIG_AR600x_SD32_XXX is not set
+# CONFIG_AR600x_CUSTOM_XXX is not set
+# CONFIG_ATH6KL_ENABLE_COEXISTENCE is not set
+# CONFIG_ATH6KL_HCI_BRIDGE is not set
+# CONFIG_ATH6KL_CFG80211 is not set
+# CONFIG_ATH6KL_HTC_RAW_INTERFACE is not set
+# CONFIG_ATH6KL_VIRTUAL_SCATTER_GATHER is not set
+CONFIG_ATH6KL_DEBUG=y
+# CONFIG_ATH6KL_ENABLE_HOST_DEBUG is not set
+CONFIG_ATH6KL_ENABLE_TARGET_DEBUG_PRINTS=y
+CONFIG_AR600x_DEBUG_UART_TX_PIN=8
+# CONFIG_ATH6KL_DISABLE_TARGET_DBGLOGS is not set
+
+#
# File systems
#
CONFIG_EXT2_FS=y
--
1.7.0.4
next prev parent reply other threads:[~2010-07-26 8:33 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-26 8:30 [RFC 01/36] [Driver][Qualcomm 1070][LCD] Resolve the booting to Chromium issue Wayne Lin
2010-07-26 8:30 ` [RFC 02/36] [Driver][Qualcomm 1070][USB] Register GPIO#109 for USB analog switch configuration Wayne Lin
2010-07-26 8:30 ` [RFC 04/36] [Driver][Qualcomm 1070][EC_KB] Adding new qci keyboard driver Wayne Lin
2010-07-26 8:55 ` Dmitry Torokhov
2010-07-26 11:16 ` Trilok Soni
2010-07-26 8:59 ` Datta, Shubhrajyoti
2010-07-26 8:30 ` [RFC 05/36] [Driver][Qualcomm 1070][TPM] Enable TPM module Wayne Lin
2010-07-26 8:30 ` [RFC 06/36] [Driver][Qualcomm 1070][EC_BRG] EC Bridge driver porting Wayne Lin
2010-07-26 8:30 ` [RFC 07/36] [Driver][Qualcomm 1070][EC_BRG] Enable EC Bridge Wayne Lin
2010-07-26 8:30 ` [RFC 08/36] [Driver][Qualcomm 1070][EC_BAT] EC battery driver porting Wayne Lin
2010-07-26 8:30 ` [RFC 09/36] [Driver][Qualcomm 1070][EC_BAT] Enable EC battery Wayne Lin
2010-07-26 8:30 ` [RFC 11/36] [Driver][Qualcomm 1070][EC_G_SENSOR] Enable EC gravitation sensor Wayne Lin
2010-07-26 8:30 ` [RFC 12/36] [Driver][Qualcomm 1070][EC_C_SENSOR] EC compass sensor driver porting Wayne Lin
2010-07-26 8:30 ` [RFC 13/36] [Driver][Qualcomm 1070][EC_C_SENSOR] Enable EC compass sensor driver Wayne Lin
2010-07-26 8:30 ` [RFC 14/36] [Driver][Qualcomm 1070][CLOCK] Modify the AXI bus speed Wayne Lin
2010-07-26 8:30 ` [RFC 15/36] [Driver][Qualcomm 1070][VERSION] Adding version definition Wayne Lin
2010-07-26 8:30 ` Wayne Lin [this message]
2010-07-26 8:30 ` [RFC 18/36] [Driver][Qualcomm 1070][WIFI] Turn on the Athros WIFI power Wayne Lin
2010-07-26 8:30 ` [RFC 19/36] [Driver][Qualcomm 1070][BT] Enable Athros BT driver Wayne Lin
2010-07-26 8:30 ` [RFC 20/36] [Driver][Qualcomm 1070][WIFI/BT] Enable MMC1 dummy send read and configure Athros WIFI build-in driver Wayne Lin
2010-07-26 8:30 ` [RFC 21/36] Revert " [Driver][Qualcomm 1070][CLOCK] Modify the AXI bus speed" Wayne Lin
2010-07-26 8:46 ` Dmitry Torokhov
2010-07-26 8:30 ` [RFC 22/36] [Driver][Qualcomm 1070][CLOCK] Modify the AXI bus maximum speed Wayne Lin
2010-07-26 8:30 ` [RFC 23/36] [Driver][Qualcomm 1065][AT_COMMAND]retrieve message Wayne Lin
2010-07-26 8:30 ` [RFC 24/36] [Driver][Qualcomm 1070][CLOCK] Modify the AXI clock for 1.2Ghz Wayne Lin
2010-07-26 8:30 ` [RFC 25/36] [Driver][Qualcomm 1070][EC_BRG] Adding new EC bridge driver Wayne Lin
2010-07-26 8:30 ` [RFC 26/36] [Driver][Qualcomm 1070][EC_BL] New EC backlight driver porting Wayne Lin
2010-07-26 8:30 ` [RFC 27/36] [Driver][Qualcomm 1070][EC_BRG] Enable NuvoTon WPCE775X driver and disable WinBond WPCE775X driver Wayne Lin
2010-07-26 8:30 ` [RFC 28/36] [Driver][Qualcomm 1070][EC_BL] Enable QCI backlight driver Wayne Lin
2010-07-26 8:30 ` [RFC 29/36] [Driver][Qualcomm 1070][EC_BRG] Correct new EC bridge driver Makefile and Kconfig Wayne Lin
2010-07-26 8:30 ` [RFC 30/36] [Driver][Qualcomm 1070][EC_G_SENSOR] Enable EC gravitation sensor Wayne Lin
2010-07-26 8:30 ` [RFC 31/36] [Driver][Qualcomm 1070][VERSION] 0.1.1 Wayne Lin
2010-07-26 8:30 ` [RFC 32/36] [Driver][Qualcomm 1070][MMC] Enable MMC1 HW detection Wayne Lin
2010-07-26 8:30 ` [RFC 33/36] [Driver][Qualcomm 1070][VERSION] 0.1.2 Wayne Lin
2010-07-26 8:30 ` [RFC 34/36] [Driver][Qualcomm 1070][EC_BAT] Adding newer version battery driver Wayne Lin
2010-07-26 8:30 ` [RFC 35/36] [Driver][Qualcomm 1070][EC_BAT] Enable EC battery Wayne Lin
2010-07-26 8:30 ` [RFC 36/36] [Driver][Qualcomm 1070][VERSION] 0.2.0 Wayne Lin
2010-07-26 8:40 ` Premi, Sanjeev
2010-07-26 8:47 ` Premi, Sanjeev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1280133045-25945-17-git-send-email-wayne.lin@quantatw.com \
--to=00601wayne@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=wayne.lin@quantatw.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).