From: Wayne Lin <00601wayne@gmail.com>
To: linux-input@vger.kernel.org
Cc: wayne <wayne.lin@quantatw.com>
Subject: [RFC 35/36] [Driver][Qualcomm 1070][EC_BAT] Enable EC battery
Date: Mon, 26 Jul 2010 16:30:44 +0800 [thread overview]
Message-ID: <1280133045-25945-35-git-send-email-wayne.lin@quantatw.com> (raw)
In-Reply-To: <1280133045-25945-1-git-send-email-wayne.lin@quantatw.com>
From: wayne <wayne.lin@quantatw.com>
---
arch/arm/configs/qsd8650a-st1_5_defconfig | 10 ++++++----
1 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/arm/configs/qsd8650a-st1_5_defconfig b/arch/arm/configs/qsd8650a-st1_5_defconfig
index fccad74..30caca8 100644
--- a/arch/arm/configs/qsd8650a-st1_5_defconfig
+++ b/arch/arm/configs/qsd8650a-st1_5_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.32.9
-# Mon Jun 28 14:46:18 2010
+# Wed Jul 21 15:20:49 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -993,6 +993,7 @@ CONFIG_POWER_SUPPLY=y
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
+CONFIG_BATTERY_QCIBAT=y
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
@@ -1572,13 +1573,14 @@ CONFIG_MMC_BLOCK_PARANOID_RESUME=y
#
# MMC/SD/SDIO Host Controller Drivers
#
-# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
# CONFIG_MMC_AT91 is not set
# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MMC_SPI is not set
CONFIG_MMC_MSM=y
-# CONFIG_MMC_MSM7X00A_RESUME_IN_WQ is not set
-# CONFIG_MMC_MSM_SDIO_SUPPORT is not set
+CONFIG_MMC_MSM7X00A_RESUME_IN_WQ=y
+CONFIG_MMC_MSM_SDIO_SUPPORT=y
CONFIG_MMC_MSM_CARD_HW_DETECTION=y
CONFIG_MMC_MSM_SDC1_SUPPORT=y
# CONFIG_MMC_MSM_SDC1_8_BIT_SUPPORT is not set
--
1.7.0.4
next prev parent reply other threads:[~2010-07-26 8:33 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-26 8:30 [RFC 01/36] [Driver][Qualcomm 1070][LCD] Resolve the booting to Chromium issue Wayne Lin
2010-07-26 8:30 ` [RFC 02/36] [Driver][Qualcomm 1070][USB] Register GPIO#109 for USB analog switch configuration Wayne Lin
2010-07-26 8:30 ` [RFC 04/36] [Driver][Qualcomm 1070][EC_KB] Adding new qci keyboard driver Wayne Lin
2010-07-26 8:55 ` Dmitry Torokhov
2010-07-26 11:16 ` Trilok Soni
2010-07-26 8:59 ` Datta, Shubhrajyoti
2010-07-26 8:30 ` [RFC 05/36] [Driver][Qualcomm 1070][TPM] Enable TPM module Wayne Lin
2010-07-26 8:30 ` [RFC 06/36] [Driver][Qualcomm 1070][EC_BRG] EC Bridge driver porting Wayne Lin
2010-07-26 8:30 ` [RFC 07/36] [Driver][Qualcomm 1070][EC_BRG] Enable EC Bridge Wayne Lin
2010-07-26 8:30 ` [RFC 08/36] [Driver][Qualcomm 1070][EC_BAT] EC battery driver porting Wayne Lin
2010-07-26 8:30 ` [RFC 09/36] [Driver][Qualcomm 1070][EC_BAT] Enable EC battery Wayne Lin
2010-07-26 8:30 ` [RFC 11/36] [Driver][Qualcomm 1070][EC_G_SENSOR] Enable EC gravitation sensor Wayne Lin
2010-07-26 8:30 ` [RFC 12/36] [Driver][Qualcomm 1070][EC_C_SENSOR] EC compass sensor driver porting Wayne Lin
2010-07-26 8:30 ` [RFC 13/36] [Driver][Qualcomm 1070][EC_C_SENSOR] Enable EC compass sensor driver Wayne Lin
2010-07-26 8:30 ` [RFC 14/36] [Driver][Qualcomm 1070][CLOCK] Modify the AXI bus speed Wayne Lin
2010-07-26 8:30 ` [RFC 15/36] [Driver][Qualcomm 1070][VERSION] Adding version definition Wayne Lin
2010-07-26 8:30 ` [RFC 17/36] [Driver][Qualcomm 1070][WIFI/BT] Enable Athros WIFI driver Wayne Lin
2010-07-26 8:30 ` [RFC 18/36] [Driver][Qualcomm 1070][WIFI] Turn on the Athros WIFI power Wayne Lin
2010-07-26 8:30 ` [RFC 19/36] [Driver][Qualcomm 1070][BT] Enable Athros BT driver Wayne Lin
2010-07-26 8:30 ` [RFC 20/36] [Driver][Qualcomm 1070][WIFI/BT] Enable MMC1 dummy send read and configure Athros WIFI build-in driver Wayne Lin
2010-07-26 8:30 ` [RFC 21/36] Revert " [Driver][Qualcomm 1070][CLOCK] Modify the AXI bus speed" Wayne Lin
2010-07-26 8:46 ` Dmitry Torokhov
2010-07-26 8:30 ` [RFC 22/36] [Driver][Qualcomm 1070][CLOCK] Modify the AXI bus maximum speed Wayne Lin
2010-07-26 8:30 ` [RFC 23/36] [Driver][Qualcomm 1065][AT_COMMAND]retrieve message Wayne Lin
2010-07-26 8:30 ` [RFC 24/36] [Driver][Qualcomm 1070][CLOCK] Modify the AXI clock for 1.2Ghz Wayne Lin
2010-07-26 8:30 ` [RFC 25/36] [Driver][Qualcomm 1070][EC_BRG] Adding new EC bridge driver Wayne Lin
2010-07-26 8:30 ` [RFC 26/36] [Driver][Qualcomm 1070][EC_BL] New EC backlight driver porting Wayne Lin
2010-07-26 8:30 ` [RFC 27/36] [Driver][Qualcomm 1070][EC_BRG] Enable NuvoTon WPCE775X driver and disable WinBond WPCE775X driver Wayne Lin
2010-07-26 8:30 ` [RFC 28/36] [Driver][Qualcomm 1070][EC_BL] Enable QCI backlight driver Wayne Lin
2010-07-26 8:30 ` [RFC 29/36] [Driver][Qualcomm 1070][EC_BRG] Correct new EC bridge driver Makefile and Kconfig Wayne Lin
2010-07-26 8:30 ` [RFC 30/36] [Driver][Qualcomm 1070][EC_G_SENSOR] Enable EC gravitation sensor Wayne Lin
2010-07-26 8:30 ` [RFC 31/36] [Driver][Qualcomm 1070][VERSION] 0.1.1 Wayne Lin
2010-07-26 8:30 ` [RFC 32/36] [Driver][Qualcomm 1070][MMC] Enable MMC1 HW detection Wayne Lin
2010-07-26 8:30 ` [RFC 33/36] [Driver][Qualcomm 1070][VERSION] 0.1.2 Wayne Lin
2010-07-26 8:30 ` [RFC 34/36] [Driver][Qualcomm 1070][EC_BAT] Adding newer version battery driver Wayne Lin
2010-07-26 8:30 ` Wayne Lin [this message]
2010-07-26 8:30 ` [RFC 36/36] [Driver][Qualcomm 1070][VERSION] 0.2.0 Wayne Lin
2010-07-26 8:40 ` Premi, Sanjeev
2010-07-26 8:47 ` Premi, Sanjeev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1280133045-25945-35-git-send-email-wayne.lin@quantatw.com \
--to=00601wayne@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=wayne.lin@quantatw.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).