From: Maxim Levitsky <maximlevitsky@gmail.com>
To: lirc-list@lists.sourceforge.net
Cc: Jarod Wilson <jarod@wilsonet.com>,
linux-input@vger.kernel.org, linux-media@vger.kernel.org,
Mauro Carvalho Chehab <mchehab@redhat.com>,
Maxim Levitsky <maximlevitsky@gmail.com>
Subject: [PATCH 4/9] IR: add helper functions for ir input devices that send ir timing data in small chunks, and alternation between pulses and spaces isn't guaranteed.
Date: Wed, 28 Jul 2010 18:14:06 +0300 [thread overview]
Message-ID: <1280330051-27732-5-git-send-email-maximlevitsky@gmail.com> (raw)
In-Reply-To: <1280330051-27732-1-git-send-email-maximlevitsky@gmail.com>
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
---
drivers/media/IR/ir-core-priv.h | 1 +
drivers/media/IR/ir-keytable.c | 2 +-
drivers/media/IR/ir-raw-event.c | 86 +++++++++++++++++++++++++++++++++++++++
include/media/ir-core.h | 24 +++++++++-
4 files changed, 109 insertions(+), 4 deletions(-)
diff --git a/drivers/media/IR/ir-core-priv.h b/drivers/media/IR/ir-core-priv.h
index 8ce80e4..3eafdb7 100644
--- a/drivers/media/IR/ir-core-priv.h
+++ b/drivers/media/IR/ir-core-priv.h
@@ -36,6 +36,7 @@ struct ir_raw_event_ctrl {
struct kfifo kfifo; /* fifo for the pulse/space durations */
ktime_t last_event; /* when last event occurred */
enum raw_event_type last_type; /* last event type */
+ struct ir_raw_event current_sample; /* sample that is not yet pushed to fifo */
struct input_dev *input_dev; /* pointer to the parent input_dev */
u64 enabled_protocols; /* enabled raw protocol decoders */
diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
index 94a8577..34b9c07 100644
--- a/drivers/media/IR/ir-keytable.c
+++ b/drivers/media/IR/ir-keytable.c
@@ -428,7 +428,7 @@ static void ir_close(struct input_dev *input_dev)
*/
int __ir_input_register(struct input_dev *input_dev,
const struct ir_scancode_table *rc_tab,
- const struct ir_dev_props *props,
+ struct ir_dev_props *props,
const char *driver_name)
{
struct ir_input_dev *ir_dev;
diff --git a/drivers/media/IR/ir-raw-event.c b/drivers/media/IR/ir-raw-event.c
index c6a80b3..bdf2ed8 100644
--- a/drivers/media/IR/ir-raw-event.c
+++ b/drivers/media/IR/ir-raw-event.c
@@ -129,6 +129,92 @@ int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type typ
EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
/**
+ * ir_raw_event_store_with_filter() - pass next pulse/space to decoders with some processing
+ * @input_dev: the struct input_dev device descriptor
+ * @type: the type of the event that has occurred
+ *
+ * This routine (which may be called from an interrupt context) is used to
+ * store the beginning of an ir pulse or space (or the start/end of ir
+ * reception) for the raw ir decoding state machines.\
+ * This routine is intended for devices with limited internal buffer
+ * It automerges samples of same type, and handles timeouts
+ */
+int ir_raw_event_store_with_filter(struct input_dev *input_dev,
+ struct ir_raw_event *ev)
+{
+ struct ir_input_dev *ir = input_get_drvdata(input_dev);
+ struct ir_raw_event_ctrl *raw = ir->raw;
+
+ if (!ir->raw || !ir->props)
+ return -EINVAL;
+
+ /* Ignore spaces in idle mode */
+ if (ir->idle && !ev->pulse)
+ return 0;
+ else if (ir->idle)
+ ir_raw_event_set_idle(input_dev, 0);
+
+ if (!raw->current_sample.duration) {
+ raw->current_sample = *ev;
+ } else if (ev->pulse == raw->current_sample.pulse) {
+ raw->current_sample.duration += ev->duration;
+ } else {
+ ir_raw_event_store(input_dev, &raw->current_sample);
+ raw->current_sample = *ev;
+ }
+
+ /* Enter idle mode if nessesary */
+ if (!ev->pulse && ir->props->timeout &&
+ raw->current_sample.duration >= ir->props->timeout)
+ ir_raw_event_set_idle(input_dev, 1);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_store_with_filter);
+
+
+void ir_raw_event_set_idle(struct input_dev *input_dev, int idle)
+{
+ struct ir_input_dev *ir = input_get_drvdata(input_dev);
+ struct ir_raw_event_ctrl *raw = ir->raw;
+ ktime_t now;
+ u64 delta;
+
+ if (!ir->props)
+ return;
+
+ if (!ir->raw)
+ goto out;
+
+ if (idle) {
+ IR_dprintk(2, "enter idle mode\n");
+ raw->last_event = ktime_get();
+ } else {
+ IR_dprintk(2, "exit idle mode\n");
+
+ now = ktime_get();
+ delta = ktime_to_ns(ktime_sub(now, ir->raw->last_event));
+
+ WARN_ON(raw->current_sample.pulse);
+
+ raw->current_sample.duration =
+ min(raw->current_sample.duration + delta,
+ (u64)IR_MAX_DURATION);
+
+ ir_raw_event_store(input_dev, &raw->current_sample);
+
+ if (raw->current_sample.duration == IR_MAX_DURATION)
+ ir_raw_event_reset(input_dev);
+
+ raw->current_sample.duration = 0;
+ }
+out:
+ if (ir->props->s_idle)
+ ir->props->s_idle(ir->props->priv, idle);
+ ir->idle = idle;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_set_idle);
+
+/**
* ir_raw_event_handle() - schedules the decoding of stored ir data
* @input_dev: the struct input_dev device descriptor
*
diff --git a/include/media/ir-core.h b/include/media/ir-core.h
index 513e60d..53ce966 100644
--- a/include/media/ir-core.h
+++ b/include/media/ir-core.h
@@ -41,6 +41,9 @@ enum rc_driver_type {
* anything with it. Yet, as the same keycode table can be used with other
* devices, a mask is provided to allow its usage. Drivers should generally
* leave this field in blank
+ * @timeout: optional time after which device stops sending data
+ * @min_timeout: minimum timeout supported by device
+ * @max_timeout: maximum timeout supported by device
* @priv: driver-specific data, to be used on the callbacks
* @change_protocol: allow changing the protocol used on hardware decoders
* @open: callback to allow drivers to enable polling/irq when IR input device
@@ -50,11 +53,19 @@ enum rc_driver_type {
* @s_tx_mask: set transmitter mask (for devices with multiple tx outputs)
* @s_tx_carrier: set transmit carrier frequency
* @tx_ir: transmit IR
+ * @s_idle: optional: enable/disable hardware idle mode, upon which,
+ device doesn't interrupt host untill it sees IR data
*/
struct ir_dev_props {
enum rc_driver_type driver_type;
unsigned long allowed_protos;
u32 scanmask;
+
+ u64 timeout;
+ u64 min_timeout;
+ u64 max_timeout;
+
+
void *priv;
int (*change_protocol)(void *priv, u64 ir_type);
int (*open)(void *priv);
@@ -62,6 +73,7 @@ struct ir_dev_props {
int (*s_tx_mask)(void *priv, u32 mask);
int (*s_tx_carrier)(void *priv, u32 carrier);
int (*tx_ir)(void *priv, int *txbuf, u32 n);
+ void (*s_idle) (void *priv, int enable);
};
struct ir_input_dev {
@@ -69,9 +81,10 @@ struct ir_input_dev {
char *driver_name; /* Name of the driver module */
struct ir_scancode_table rc_tab; /* scan/key table */
unsigned long devno; /* device number */
- const struct ir_dev_props *props; /* Device properties */
+ struct ir_dev_props *props; /* Device properties */
struct ir_raw_event_ctrl *raw; /* for raw pulse/space events */
struct input_dev *input_dev; /* the input device associated with this device */
+ int idle;
/* key info - needed by IR keycode handlers */
spinlock_t keylock; /* protects the below members */
@@ -95,12 +108,12 @@ enum raw_event_type {
/* From ir-keytable.c */
int __ir_input_register(struct input_dev *dev,
const struct ir_scancode_table *ir_codes,
- const struct ir_dev_props *props,
+ struct ir_dev_props *props,
const char *driver_name);
static inline int ir_input_register(struct input_dev *dev,
const char *map_name,
- const struct ir_dev_props *props,
+ struct ir_dev_props *props,
const char *driver_name) {
struct ir_scancode_table *ir_codes;
struct ir_input_dev *ir_dev;
@@ -144,6 +157,11 @@ struct ir_raw_event {
void ir_raw_event_handle(struct input_dev *input_dev);
int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev);
int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type);
+int ir_raw_event_store_with_filter(struct input_dev *input_dev,
+ struct ir_raw_event *ev);
+
+void ir_raw_event_set_idle(struct input_dev *input_dev, int idle);
+
static inline void ir_raw_event_reset(struct input_dev *input_dev)
{
struct ir_raw_event ev = { .pulse = false, .duration = 0 };
--
1.7.0.4
next prev parent reply other threads:[~2010-07-28 15:14 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-28 15:14 [PATCH 0/9 v1] IR: few fixes, additions and ENE driver Maxim Levitsky
2010-07-28 15:14 ` [PATCH 1/9] IR: Kconfig fixes Maxim Levitsky
2010-07-28 17:36 ` Randy Dunlap
2010-07-28 20:31 ` Maxim Levitsky
2010-07-28 15:14 ` [PATCH 2/9] IR: minor fixes: Maxim Levitsky
2010-07-28 16:01 ` Mauro Carvalho Chehab
2010-07-28 16:38 ` Maxim Levitsky
2010-07-28 17:59 ` Mauro Carvalho Chehab
2010-07-28 17:23 ` Jarod Wilson
2010-07-28 15:14 ` [PATCH 3/9] IR: replace spinlock with mutex Maxim Levitsky
2010-07-28 16:03 ` Mauro Carvalho Chehab
2010-07-28 16:32 ` Maxim Levitsky
2010-07-28 17:43 ` Jarod Wilson
2010-07-28 18:37 ` Mauro Carvalho Chehab
2010-07-28 15:14 ` Maxim Levitsky [this message]
2010-07-28 16:09 ` [PATCH 4/9] IR: add helper functions for ir input devices that send ir timing data in small chunks, and alternation between pulses and spaces isn't guaranteed Mauro Carvalho Chehab
2010-07-28 16:29 ` Maxim Levitsky
2010-07-28 17:46 ` Jarod Wilson
2010-07-28 20:57 ` Jarod Wilson
2010-07-28 21:16 ` Maxim Levitsky
2010-07-28 15:14 ` [PATCH 5/9] IR: extend interfaces to support more device settings Maxim Levitsky
2010-07-28 17:00 ` Mauro Carvalho Chehab
2010-07-28 20:47 ` Jarod Wilson
2010-07-28 15:14 ` [PATCH 6/9] IR: actually allow not to compile keymaps in Maxim Levitsky
2010-07-28 17:58 ` Jarod Wilson
2010-07-28 15:14 ` [PATCH 7/9] IR: actualy report unknown scancodes the in-kernel decoders found Maxim Levitsky
2010-07-28 15:14 ` [PATCH 8/9] IR: Add ENE input driver Maxim Levitsky
2010-07-28 17:10 ` Mauro Carvalho Chehab
2010-07-28 17:13 ` Maxim Levitsky
2010-07-28 17:17 ` Jarod Wilson
2010-07-28 18:13 ` Mauro Carvalho Chehab
2010-07-28 15:14 ` [PATCH 9/9] STAGING: remove ENE driver Maxim Levitsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1280330051-27732-5-git-send-email-maximlevitsky@gmail.com \
--to=maximlevitsky@gmail.com \
--cc=jarod@wilsonet.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=lirc-list@lists.sourceforge.net \
--cc=mchehab@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).