From: Maxim Levitsky <maximlevitsky@gmail.com>
To: lirc-list@lists.sourceforge.net
Cc: Jarod Wilson <jarod@wilsonet.com>,
linux-input@vger.kernel.org, linux-media@vger.kernel.org,
Mauro Carvalho Chehab <mchehab@redhat.com>,
Christoph Bartelmus <lirc@bartelmus.de>,
Maxim Levitsky <maximlevitsky@gmail.com>
Subject: [PATCH 01/13] IR: Kconfig fixes
Date: Fri, 30 Jul 2010 05:17:03 +0300 [thread overview]
Message-ID: <1280456235-2024-2-git-send-email-maximlevitsky@gmail.com> (raw)
In-Reply-To: <1280456235-2024-1-git-send-email-maximlevitsky@gmail.com>
Move IR drives below separate menu.
This allows to disable them.
Also correct a typo.
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
---
drivers/media/IR/Kconfig | 10 +++++++---
1 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/media/IR/Kconfig b/drivers/media/IR/Kconfig
index e557ae0..fc48a3f 100644
--- a/drivers/media/IR/Kconfig
+++ b/drivers/media/IR/Kconfig
@@ -1,8 +1,10 @@
-config IR_CORE
- tristate
+menuconfig IR_CORE
+ tristate "Infrared remote controller adapters"
depends on INPUT
default INPUT
+if IR_CORE
+
config VIDEO_IR
tristate
depends on IR_CORE
@@ -16,7 +18,7 @@ config LIRC
Enable this option to build the Linux Infrared Remote
Control (LIRC) core device interface driver. The LIRC
interface passes raw IR to and from userspace, where the
- LIRC daemon handles protocol decoding for IR reception ann
+ LIRC daemon handles protocol decoding for IR reception and
encoding for IR transmitting (aka "blasting").
source "drivers/media/IR/keymaps/Kconfig"
@@ -102,3 +104,5 @@ config IR_MCEUSB
To compile this driver as a module, choose M here: the
module will be called mceusb.
+
+endif #IR_CORE
--
1.7.0.4
next prev parent reply other threads:[~2010-07-30 2:17 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-30 2:17 [PATCH 0/9 v2] IR: few fixes, additions and ENE driver Maxim Levitsky
2010-07-30 2:17 ` Maxim Levitsky [this message]
2010-07-30 2:17 ` [PATCH 02/13] IR: minor fixes: Maxim Levitsky
2010-07-30 2:17 ` [PATCH 03/13] IR: replace spinlock with mutex Maxim Levitsky
2010-07-30 2:17 ` [PATCH 04/13] IR: fix locking in ir_raw_event_work Maxim Levitsky
2010-07-30 2:42 ` Andy Walls
2010-07-30 11:02 ` Maxim Levitsky
2010-07-30 2:17 ` [PATCH 05/13] IR: JVC: make repeat work Maxim Levitsky
2010-07-30 2:17 ` [PATCH 06/13] IR: nec decoder: fix repeat Maxim Levitsky
2010-07-30 2:50 ` Andy Walls
2010-07-30 2:17 ` [PATCH 07/13] IR: NECX: support repeat Maxim Levitsky
2010-07-30 2:17 ` [PATCH 08/13] IR: Allow not to compile keymaps in Maxim Levitsky
2010-07-30 2:17 ` [PATCH 09/13] IR: add helper function for hardware with small o/b buffer Maxim Levitsky
2010-07-30 2:17 ` [PATCH 10/13] IR: extend interfaces to support more device settings LIRC: add new IOCTL that enables learning mode (wide band receiver) Maxim Levitsky
2010-07-30 2:17 ` [PATCH 11/13] IR: report unknown scancodes the in-kernel decoders found Maxim Levitsky
2010-07-30 2:17 ` [PATCH 12/13] STAGING: remove lirc_ene0100 driver Maxim Levitsky
2010-07-30 2:17 ` [PATCH 13/13] IR: Port ene driver to new IR subsystem and enable it Maxim Levitsky
2010-07-30 2:39 ` Jon Smirl
2010-07-30 3:46 ` Andy Walls
2010-07-30 11:36 ` Maxim Levitsky
2010-07-30 11:51 ` Jon Smirl
2010-07-30 11:54 ` Maxim Levitsky
2010-07-30 12:02 ` Jon Smirl
2010-07-30 12:07 ` Jon Smirl
2010-07-30 12:45 ` Maxim Levitsky
2010-07-31 13:55 ` Andy Walls
2010-07-31 14:28 ` Maxim Levitsky
2010-07-31 14:37 ` Jon Smirl
2010-07-31 14:51 ` Maxim Levitsky
2010-07-31 15:12 ` Andy Walls
2010-07-31 16:25 ` Jon Smirl
2010-07-31 16:44 ` Maxim Levitsky
2010-07-31 16:51 ` Maxim Levitsky
2010-07-31 17:47 ` Christoph Bartelmus
2010-07-31 18:14 ` Jon Smirl
2010-07-31 18:33 ` Jon Smirl
2010-07-31 18:51 ` Andy Walls
2010-07-31 21:53 ` Jon Smirl
2010-07-31 23:26 ` Maxim Levitsky
2010-08-01 9:43 ` Christoph Bartelmus
2010-08-02 15:12 ` Remote that breaks current system (was: IR: Port ene driver...) it Jarod Wilson
2010-08-02 16:11 ` Jon Smirl
2010-08-02 16:42 ` Remote that breaks current system Christoph Bartelmus
2010-08-02 17:13 ` Jon Smirl
2010-08-02 18:09 ` Jarod Wilson
2010-08-02 20:42 ` Jon Smirl
2010-08-11 14:38 ` Jarod Wilson
2010-08-12 6:46 ` Christoph Bartelmus
2010-08-16 4:04 ` Jarod Wilson
2010-08-16 20:41 ` Maxim Levitsky
2010-08-17 0:14 ` Jarod Wilson
2010-08-17 3:30 ` Mauro Carvalho Chehab
2010-08-17 3:40 ` Jarod Wilson
2010-08-02 17:51 ` Jarod Wilson
2010-08-01 9:50 ` [PATCH 13/13] IR: Port ene driver to new IR subsystem and enable it Christoph Bartelmus
2010-08-01 14:00 ` Jon Smirl
2010-08-01 14:05 ` Jon Smirl
2010-08-01 15:13 ` Christoph Bartelmus
-- strict thread matches above, loose matches on Subject: below --
2010-07-30 11:38 [PATCH 0/9 v3] IR: few fixes, additions and ENE driver Maxim Levitsky
2010-07-30 11:38 ` [PATCH 01/13] IR: Kconfig fixes Maxim Levitsky
2010-07-31 14:59 [PATCH 0/9 v4] IR: few fixes, additions and ENE driver Maxim Levitsky
2010-07-31 14:59 ` [PATCH 01/13] IR: Kconfig fixes Maxim Levitsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1280456235-2024-2-git-send-email-maximlevitsky@gmail.com \
--to=maximlevitsky@gmail.com \
--cc=jarod@wilsonet.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=lirc-list@lists.sourceforge.net \
--cc=lirc@bartelmus.de \
--cc=mchehab@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).