[PATCH 0/9 v3] IR: few fixes, additions and ENE driver

[PATCH 0/9 v3] IR: few fixes, additions and ENE driver

[Maxim Levitsky]

Hi,

This is mostly same patchset.

I addressed the comments of Andy Walls.

Now IR decoding is done by a separate thread, and this fixes
the race, and unnesesary performance loss due to it.

Best regards,
	Maxim Levitsky

[PATCH 01/13] IR: Kconfig fixes

[Maxim Levitsky]

Move IR drives below separate menu.
This allows to disable them.
Also correct a typo.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
---
 drivers/media/IR/Kconfig |   10 +++++++---
 1 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/media/IR/Kconfig b/drivers/media/IR/Kconfig
index e557ae0..fc48a3f 100644
--- a/drivers/media/IR/Kconfig
+++ b/drivers/media/IR/Kconfig
@@ -1,8 +1,10 @@
-config IR_CORE
-	tristate
+menuconfig IR_CORE
+	tristate "Infrared remote controller adapters"
 	depends on INPUT
 	default INPUT
 
+if IR_CORE
+
 config VIDEO_IR
 	tristate
 	depends on IR_CORE
@@ -16,7 +18,7 @@ config LIRC
 	   Enable this option to build the Linux Infrared Remote
 	   Control (LIRC) core device interface driver. The LIRC
 	   interface passes raw IR to and from userspace, where the
-	   LIRC daemon handles protocol decoding for IR reception ann
+	   LIRC daemon handles protocol decoding for IR reception and
 	   encoding for IR transmitting (aka "blasting").
 
 source "drivers/media/IR/keymaps/Kconfig"
@@ -102,3 +104,5 @@ config IR_MCEUSB
 
 	   To compile this driver as a module, choose M here: the
 	   module will be called mceusb.
+
+endif #IR_CORE
-- 
1.7.0.4

[PATCH 02/13] IR: minor fixes:

[Maxim Levitsky]

* lirc: Don't propagate reset event to userspace
* lirc: Remove strange logic from lirc that would make first sample always be pulse
* Make TO_US macro actualy print what it should.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
---
 drivers/media/IR/ir-core-priv.h  |    4 +---
 drivers/media/IR/ir-lirc-codec.c |   14 ++++++++------
 drivers/media/IR/ir-raw-event.c  |    3 +++
 3 files changed, 12 insertions(+), 9 deletions(-)

diff --git a/drivers/media/IR/ir-core-priv.h b/drivers/media/IR/ir-core-priv.h
index babd520..dc26e2b 100644
--- a/drivers/media/IR/ir-core-priv.h
+++ b/drivers/media/IR/ir-core-priv.h
@@ -76,7 +76,6 @@ struct ir_raw_event_ctrl {
 	struct lirc_codec {
 		struct ir_input_dev *ir_dev;
 		struct lirc_driver *drv;
-		int lircdata;
 	} lirc;
 };
 
@@ -104,10 +103,9 @@ static inline void decrease_duration(struct ir_raw_event *ev, unsigned duration)
 		ev->duration -= duration;
 }
 
-#define TO_US(duration)			(((duration) + 500) / 1000)
+#define TO_US(duration)			DIV_ROUND_CLOSEST((duration), 1000)
 #define TO_STR(is_pulse)		((is_pulse) ? "pulse" : "space")
 #define IS_RESET(ev)			(ev.duration == 0)
-
 /*
  * Routines from ir-sysfs.c - Meant to be called only internally inside
  * ir-core
diff --git a/drivers/media/IR/ir-lirc-codec.c b/drivers/media/IR/ir-lirc-codec.c
index 3ba482d..8ca01fd 100644
--- a/drivers/media/IR/ir-lirc-codec.c
+++ b/drivers/media/IR/ir-lirc-codec.c
@@ -32,6 +32,7 @@
 static int ir_lirc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 {
 	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	int sample;
 
 	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_LIRC))
 		return 0;
@@ -39,18 +40,21 @@ static int ir_lirc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 	if (!ir_dev->raw->lirc.drv || !ir_dev->raw->lirc.drv->rbuf)
 		return -EINVAL;
 
+	if (IS_RESET(ev))
+		return 0;
+
 	IR_dprintk(2, "LIRC data transfer started (%uus %s)\n",
 		   TO_US(ev.duration), TO_STR(ev.pulse));
 
-	ir_dev->raw->lirc.lircdata += ev.duration / 1000;
+
+	sample = ev.duration / 1000;
 	if (ev.pulse)
-		ir_dev->raw->lirc.lircdata |= PULSE_BIT;
+		sample |= PULSE_BIT;
 
 	lirc_buffer_write(ir_dev->raw->lirc.drv->rbuf,
-			  (unsigned char *) &ir_dev->raw->lirc.lircdata);
+			  (unsigned char *) &sample);
 	wake_up(&ir_dev->raw->lirc.drv->rbuf->wait_poll);
 
-	ir_dev->raw->lirc.lircdata = 0;
 
 	return 0;
 }
@@ -224,8 +228,6 @@ static int ir_lirc_register(struct input_dev *input_dev)
 
 	ir_dev->raw->lirc.drv = drv;
 	ir_dev->raw->lirc.ir_dev = ir_dev;
-	ir_dev->raw->lirc.lircdata = PULSE_MASK;
-
 	return 0;
 
 lirc_register_failed:
diff --git a/drivers/media/IR/ir-raw-event.c b/drivers/media/IR/ir-raw-event.c
index 6f192ef..51f65da 100644
--- a/drivers/media/IR/ir-raw-event.c
+++ b/drivers/media/IR/ir-raw-event.c
@@ -66,6 +66,9 @@ int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev)
 	if (!ir->raw)
 		return -EINVAL;
 
+	IR_dprintk(2, "sample: (05%dus %s)\n",
+		TO_US(ev->duration), TO_STR(ev->pulse));
+
 	if (kfifo_in(&ir->raw->kfifo, ev, sizeof(*ev)) != sizeof(*ev))
 		return -ENOMEM;
 
-- 
1.7.0.4

[PATCH 03/13] IR: replace spinlock with mutex.

[Maxim Levitsky]

Some handlers (lirc for example) allocates memory on initialization,
doing so in atomic context is cumbersome.
Fixes warning about sleeping function in atomic context.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
---
 drivers/media/IR/ir-raw-event.c |   28 ++++++++++++++--------------
 1 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/media/IR/ir-raw-event.c b/drivers/media/IR/ir-raw-event.c
index 51f65da..9d5c029 100644
--- a/drivers/media/IR/ir-raw-event.c
+++ b/drivers/media/IR/ir-raw-event.c
@@ -13,7 +13,7 @@
  */
 
 #include <linux/workqueue.h>
-#include <linux/spinlock.h>
+#include <linux/mutex.h>
 #include <linux/sched.h>
 #include "ir-core-priv.h"
 
@@ -24,7 +24,7 @@
 static LIST_HEAD(ir_raw_client_list);
 
 /* Used to handle IR raw handler extensions */
-static DEFINE_SPINLOCK(ir_raw_handler_lock);
+static DEFINE_MUTEX(ir_raw_handler_lock);
 static LIST_HEAD(ir_raw_handler_list);
 static u64 available_protocols;
 
@@ -41,10 +41,10 @@ static void ir_raw_event_work(struct work_struct *work)
 		container_of(work, struct ir_raw_event_ctrl, rx_work);
 
 	while (kfifo_out(&raw->kfifo, &ev, sizeof(ev)) == sizeof(ev)) {
-		spin_lock(&ir_raw_handler_lock);
+		mutex_lock(&ir_raw_handler_lock);
 		list_for_each_entry(handler, &ir_raw_handler_list, list)
 			handler->decode(raw->input_dev, ev);
-		spin_unlock(&ir_raw_handler_lock);
+		mutex_unlock(&ir_raw_handler_lock);
 		raw->prev_ev = ev;
 	}
 }
@@ -150,9 +150,9 @@ u64
 ir_raw_get_allowed_protocols()
 {
 	u64 protocols;
-	spin_lock(&ir_raw_handler_lock);
+	mutex_lock(&ir_raw_handler_lock);
 	protocols = available_protocols;
-	spin_unlock(&ir_raw_handler_lock);
+	mutex_unlock(&ir_raw_handler_lock);
 	return protocols;
 }
 
@@ -180,12 +180,12 @@ int ir_raw_event_register(struct input_dev *input_dev)
 		return rc;
 	}
 
-	spin_lock(&ir_raw_handler_lock);
+	mutex_lock(&ir_raw_handler_lock);
 	list_add_tail(&ir->raw->list, &ir_raw_client_list);
 	list_for_each_entry(handler, &ir_raw_handler_list, list)
 		if (handler->raw_register)
 			handler->raw_register(ir->raw->input_dev);
-	spin_unlock(&ir_raw_handler_lock);
+	mutex_unlock(&ir_raw_handler_lock);
 
 	return 0;
 }
@@ -200,12 +200,12 @@ void ir_raw_event_unregister(struct input_dev *input_dev)
 
 	cancel_work_sync(&ir->raw->rx_work);
 
-	spin_lock(&ir_raw_handler_lock);
+	mutex_lock(&ir_raw_handler_lock);
 	list_del(&ir->raw->list);
 	list_for_each_entry(handler, &ir_raw_handler_list, list)
 		if (handler->raw_unregister)
 			handler->raw_unregister(ir->raw->input_dev);
-	spin_unlock(&ir_raw_handler_lock);
+	mutex_unlock(&ir_raw_handler_lock);
 
 	kfifo_free(&ir->raw->kfifo);
 	kfree(ir->raw);
@@ -220,13 +220,13 @@ int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler)
 {
 	struct ir_raw_event_ctrl *raw;
 
-	spin_lock(&ir_raw_handler_lock);
+	mutex_lock(&ir_raw_handler_lock);
 	list_add_tail(&ir_raw_handler->list, &ir_raw_handler_list);
 	if (ir_raw_handler->raw_register)
 		list_for_each_entry(raw, &ir_raw_client_list, list)
 			ir_raw_handler->raw_register(raw->input_dev);
 	available_protocols |= ir_raw_handler->protocols;
-	spin_unlock(&ir_raw_handler_lock);
+	mutex_unlock(&ir_raw_handler_lock);
 
 	return 0;
 }
@@ -236,13 +236,13 @@ void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler)
 {
 	struct ir_raw_event_ctrl *raw;
 
-	spin_lock(&ir_raw_handler_lock);
+	mutex_lock(&ir_raw_handler_lock);
 	list_del(&ir_raw_handler->list);
 	if (ir_raw_handler->raw_unregister)
 		list_for_each_entry(raw, &ir_raw_client_list, list)
 			ir_raw_handler->raw_unregister(raw->input_dev);
 	available_protocols &= ~ir_raw_handler->protocols;
-	spin_unlock(&ir_raw_handler_lock);
+	mutex_unlock(&ir_raw_handler_lock);
 }
 EXPORT_SYMBOL(ir_raw_handler_unregister);
 
-- 
1.7.0.4

[PATCH 04/13] IR: fix locking in ir_raw_event_work

[Maxim Levitsky]

It is prefectly possible to have ir_raw_event_work
running concurently on two cpus, thus we must protect
it from that situation.

Just switch to a thread that we wake up as soon as we have data.
This also ensures that this thread doesn't run unnessesarly.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
---
 drivers/media/IR/ir-core-priv.h |    2 +-
 drivers/media/IR/ir-raw-event.c |   42 ++++++++++++++++++++++++++++----------
 2 files changed, 32 insertions(+), 12 deletions(-)

diff --git a/drivers/media/IR/ir-core-priv.h b/drivers/media/IR/ir-core-priv.h
index dc26e2b..84c7a9a 100644
--- a/drivers/media/IR/ir-core-priv.h
+++ b/drivers/media/IR/ir-core-priv.h
@@ -32,7 +32,7 @@ struct ir_raw_handler {
 
 struct ir_raw_event_ctrl {
 	struct list_head		list;		/* to keep track of raw clients */
-	struct work_struct		rx_work;	/* for the rx decoding workqueue */
+	struct task_struct		*thread;
 	struct kfifo			kfifo;		/* fifo for the pulse/space durations */
 	ktime_t				last_event;	/* when last event occurred */
 	enum raw_event_type		last_type;	/* last event type */
diff --git a/drivers/media/IR/ir-raw-event.c b/drivers/media/IR/ir-raw-event.c
index 9d5c029..d0c18db 100644
--- a/drivers/media/IR/ir-raw-event.c
+++ b/drivers/media/IR/ir-raw-event.c
@@ -12,9 +12,10 @@
  *  GNU General Public License for more details.
  */
 
-#include <linux/workqueue.h>
+#include <linux/kthread.h>
 #include <linux/mutex.h>
 #include <linux/sched.h>
+#include <linux/freezer.h>
 #include "ir-core-priv.h"
 
 /* Define the max number of pulse/space transitions to buffer */
@@ -33,20 +34,30 @@ static u64 available_protocols;
 static struct work_struct wq_load;
 #endif
 
-static void ir_raw_event_work(struct work_struct *work)
+static int ir_raw_event_thread(void *data)
 {
 	struct ir_raw_event ev;
 	struct ir_raw_handler *handler;
-	struct ir_raw_event_ctrl *raw =
-		container_of(work, struct ir_raw_event_ctrl, rx_work);
+	struct ir_raw_event_ctrl *raw = (struct ir_raw_event_ctrl *)data;
+
+	while (!kthread_should_stop()) {
+		try_to_freeze();
 
-	while (kfifo_out(&raw->kfifo, &ev, sizeof(ev)) == sizeof(ev)) {
 		mutex_lock(&ir_raw_handler_lock);
-		list_for_each_entry(handler, &ir_raw_handler_list, list)
-			handler->decode(raw->input_dev, ev);
+
+		while (kfifo_out(&raw->kfifo, &ev, sizeof(ev)) == sizeof(ev)) {
+			list_for_each_entry(handler, &ir_raw_handler_list, list)
+				handler->decode(raw->input_dev, ev);
+			raw->prev_ev = ev;
+		}
+
 		mutex_unlock(&ir_raw_handler_lock);
-		raw->prev_ev = ev;
+
+		set_current_state(TASK_INTERRUPTIBLE);
+		schedule();
 	}
+
+	return 0;
 }
 
 /**
@@ -141,7 +152,7 @@ void ir_raw_event_handle(struct input_dev *input_dev)
 	if (!ir->raw)
 		return;
 
-	schedule_work(&ir->raw->rx_work);
+	wake_up_process(ir->raw->thread);
 }
 EXPORT_SYMBOL_GPL(ir_raw_event_handle);
 
@@ -170,7 +181,7 @@ int ir_raw_event_register(struct input_dev *input_dev)
 		return -ENOMEM;
 
 	ir->raw->input_dev = input_dev;
-	INIT_WORK(&ir->raw->rx_work, ir_raw_event_work);
+
 	ir->raw->enabled_protocols = ~0;
 	rc = kfifo_alloc(&ir->raw->kfifo, sizeof(s64) * MAX_IR_EVENT_SIZE,
 			 GFP_KERNEL);
@@ -180,6 +191,15 @@ int ir_raw_event_register(struct input_dev *input_dev)
 		return rc;
 	}
 
+	ir->raw->thread = kthread_run(ir_raw_event_thread, ir->raw,
+			"rc%u",  (unsigned int)ir->devno);
+
+	if (IS_ERR(ir->raw->thread)) {
+		kfree(ir->raw);
+		ir->raw = NULL;
+		return PTR_ERR(ir->raw->thread);
+	}
+
 	mutex_lock(&ir_raw_handler_lock);
 	list_add_tail(&ir->raw->list, &ir_raw_client_list);
 	list_for_each_entry(handler, &ir_raw_handler_list, list)
@@ -198,7 +218,7 @@ void ir_raw_event_unregister(struct input_dev *input_dev)
 	if (!ir->raw)
 		return;
 
-	cancel_work_sync(&ir->raw->rx_work);
+	kthread_stop(ir->raw->thread);
 
 	mutex_lock(&ir_raw_handler_lock);
 	list_del(&ir->raw->list);
-- 
1.7.0.4

[PATCH 05/13] IR: JVC: make repeat work

[Maxim Levitsky]

Currently, jvc decoder will attempt misdetect next press as a repeat
of last keypress, therefore second keypress isn't detected.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
---
 drivers/media/IR/ir-jvc-decoder.c |   14 +++++++++++++-
 1 files changed, 13 insertions(+), 1 deletions(-)

diff --git a/drivers/media/IR/ir-jvc-decoder.c b/drivers/media/IR/ir-jvc-decoder.c
index 8894d8b..77a89c4 100644
--- a/drivers/media/IR/ir-jvc-decoder.c
+++ b/drivers/media/IR/ir-jvc-decoder.c
@@ -32,6 +32,7 @@ enum jvc_state {
 	STATE_BIT_SPACE,
 	STATE_TRAILER_PULSE,
 	STATE_TRAILER_SPACE,
+	STATE_CHECK_REPEAT,
 };
 
 /**
@@ -60,6 +61,7 @@ static int ir_jvc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 	IR_dprintk(2, "JVC decode started at state %d (%uus %s)\n",
 		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
 
+again:
 	switch (data->state) {
 
 	case STATE_INACTIVE:
@@ -149,8 +151,18 @@ static int ir_jvc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 		}
 
 		data->count = 0;
-		data->state = STATE_BIT_PULSE;
+		data->state = STATE_CHECK_REPEAT;
 		return 0;
+
+	case STATE_CHECK_REPEAT:
+		if (!ev.pulse)
+			break;
+
+		if (eq_margin(ev.duration, JVC_HEADER_PULSE, JVC_UNIT / 2))
+			data->state = STATE_INACTIVE;
+  else
+			data->state = STATE_BIT_PULSE;
+		goto again;
 	}
 
 out:
-- 
1.7.0.4

[PATCH 06/13] IR: nec decoder: fix repeat.

[Maxim Levitsky]

Repeat space is 4 units, not 8.
Current code would never trigger a repeat.

However that isn't true for NECX, so repeat there
must be handled differently.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
---
 drivers/media/IR/ir-nec-decoder.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/media/IR/ir-nec-decoder.c b/drivers/media/IR/ir-nec-decoder.c
index 52e0f37..1c0cf03 100644
--- a/drivers/media/IR/ir-nec-decoder.c
+++ b/drivers/media/IR/ir-nec-decoder.c
@@ -20,7 +20,7 @@
 #define NEC_HEADER_PULSE	(16 * NEC_UNIT)
 #define NECX_HEADER_PULSE	(8  * NEC_UNIT) /* Less common NEC variant */
 #define NEC_HEADER_SPACE	(8  * NEC_UNIT)
-#define NEC_REPEAT_SPACE	(8  * NEC_UNIT)
+#define NEC_REPEAT_SPACE	(4  * NEC_UNIT)
 #define NEC_BIT_PULSE		(1  * NEC_UNIT)
 #define NEC_BIT_0_SPACE		(1  * NEC_UNIT)
 #define NEC_BIT_1_SPACE		(3  * NEC_UNIT)
-- 
1.7.0.4

Re: [PATCH 06/13] IR: nec decoder: fix repeat.

[Mauro Carvalho Chehab]

Em 30-07-2010 08:38, Maxim Levitsky escreveu:
> Repeat space is 4 units, not 8.
> Current code would never trigger a repeat.

Yes, this fixed the issue:

Jul 30 16:53:52 agua kernel: [24343.507577] ir_getkeycode: unknown key for scancode 0x0009
Jul 30 16:53:52 agua kernel: [24343.507588] ir_nec_decode: Repeat last key
Jul 30 16:53:52 agua kernel: [24343.507590] ir_nec_decode: NEC scancode 0x0009
Jul 30 16:53:52 agua kernel: [24343.507592] ir_getkeycode: unknown key for scancode 0x0009
Jul 30 16:53:52 agua kernel: [24343.507595] ir_nec_decode: Repeat last key
Jul 30 16:53:52 agua kernel: [24343.724242] ir_nec_decode: NEC scancode 0x0009
Jul 30 16:53:52 agua kernel: [24343.724246] ir_getkeycode: unknown key for scancode 0x0009
Jul 30 16:53:52 agua kernel: [24343.724257] ir_nec_decode: Repeat last key
Jul 30 16:53:52 agua kernel: [24343.724259] ir_nec_decode: NEC scancode 0x0009
Jul 30 16:53:52 agua kernel: [24343.724261] ir_getkeycode: unknown key for scancode 0x0009
Jul 30 16:53:52 agua kernel: [24343.724264] ir_nec_decode: Repeat last key
Jul 30 16:53:53 agua kernel: [24343.937576] ir_nec_decode: NEC scancode 0x0009
Jul 30 16:53:53 agua kernel: [24343.937580] ir_getkeycode: unknown key for scancode 0x0009
Jul 30 16:53:53 agua kernel: [24343.937592] ir_nec_decode: Repeat last key
Jul 30 16:53:53 agua kernel: [24343.937594] ir_nec_decode: NEC scancode 0x0009
Jul 30 16:53:53 agua kernel: [24343.937596] ir_getkeycode: unknown key for scancode 0x0009
Jul 30 16:53:53 agua kernel: [24343.937599] ir_nec_decode: Repeat last key

> 
> However that isn't true for NECX, so repeat there
> must be handled differently.
> 
> Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>

Please preserve Andy's reviewed-by: when re-submitting a patch.

> ---
>  drivers/media/IR/ir-nec-decoder.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/media/IR/ir-nec-decoder.c b/drivers/media/IR/ir-nec-decoder.c
> index 52e0f37..1c0cf03 100644
> --- a/drivers/media/IR/ir-nec-decoder.c
> +++ b/drivers/media/IR/ir-nec-decoder.c
> @@ -20,7 +20,7 @@
>  #define NEC_HEADER_PULSE	(16 * NEC_UNIT)
>  #define NECX_HEADER_PULSE	(8  * NEC_UNIT) /* Less common NEC variant */
>  #define NEC_HEADER_SPACE	(8  * NEC_UNIT)
> -#define NEC_REPEAT_SPACE	(8  * NEC_UNIT)
> +#define NEC_REPEAT_SPACE	(4  * NEC_UNIT)
>  #define NEC_BIT_PULSE		(1  * NEC_UNIT)
>  #define NEC_BIT_0_SPACE		(1  * NEC_UNIT)
>  #define NEC_BIT_1_SPACE		(3  * NEC_UNIT)

Re: [PATCH 06/13] IR: nec decoder: fix repeat.

[Maxim Levitsky]

On Fri, 2010-07-30 at 16:36 -0300, Mauro Carvalho Chehab wrote: 
> Em 30-07-2010 08:38, Maxim Levitsky escreveu:
> > Repeat space is 4 units, not 8.
> > Current code would never trigger a repeat.
> 
> Yes, this fixed the issue:
> 
> Jul 30 16:53:52 agua kernel: [24343.507577] ir_getkeycode: unknown key for scancode 0x0009
> Jul 30 16:53:52 agua kernel: [24343.507588] ir_nec_decode: Repeat last key
> Jul 30 16:53:52 agua kernel: [24343.507590] ir_nec_decode: NEC scancode 0x0009
> Jul 30 16:53:52 agua kernel: [24343.507592] ir_getkeycode: unknown key for scancode 0x0009
> Jul 30 16:53:52 agua kernel: [24343.507595] ir_nec_decode: Repeat last key
> Jul 30 16:53:52 agua kernel: [24343.724242] ir_nec_decode: NEC scancode 0x0009
> Jul 30 16:53:52 agua kernel: [24343.724246] ir_getkeycode: unknown key for scancode 0x0009
> Jul 30 16:53:52 agua kernel: [24343.724257] ir_nec_decode: Repeat last key
> Jul 30 16:53:52 agua kernel: [24343.724259] ir_nec_decode: NEC scancode 0x0009
> Jul 30 16:53:52 agua kernel: [24343.724261] ir_getkeycode: unknown key for scancode 0x0009
> Jul 30 16:53:52 agua kernel: [24343.724264] ir_nec_decode: Repeat last key
> Jul 30 16:53:53 agua kernel: [24343.937576] ir_nec_decode: NEC scancode 0x0009
> Jul 30 16:53:53 agua kernel: [24343.937580] ir_getkeycode: unknown key for scancode 0x0009
> Jul 30 16:53:53 agua kernel: [24343.937592] ir_nec_decode: Repeat last key
> Jul 30 16:53:53 agua kernel: [24343.937594] ir_nec_decode: NEC scancode 0x0009
> Jul 30 16:53:53 agua kernel: [24343.937596] ir_getkeycode: unknown key for scancode 0x0009
> Jul 30 16:53:53 agua kernel: [24343.937599] ir_nec_decode: Repeat last key
> 
> > 
> > However that isn't true for NECX, so repeat there
> > must be handled differently.
> > 
> > Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
> 
> Please preserve Andy's reviewed-by: when re-submitting a patch.

Yep, sorry about that!
Although, if I change a patch, I shouldn't preserve signed-off,
reviewed-by, lines, right?

Best regards,
Maxim Levitsky


> 
> > ---
> >  drivers/media/IR/ir-nec-decoder.c |    2 +-
> >  1 files changed, 1 insertions(+), 1 deletions(-)
> > 
> > diff --git a/drivers/media/IR/ir-nec-decoder.c b/drivers/media/IR/ir-nec-decoder.c
> > index 52e0f37..1c0cf03 100644
> > --- a/drivers/media/IR/ir-nec-decoder.c
> > +++ b/drivers/media/IR/ir-nec-decoder.c
> > @@ -20,7 +20,7 @@
> >  #define NEC_HEADER_PULSE	(16 * NEC_UNIT)
> >  #define NECX_HEADER_PULSE	(8  * NEC_UNIT) /* Less common NEC variant */
> >  #define NEC_HEADER_SPACE	(8  * NEC_UNIT)
> > -#define NEC_REPEAT_SPACE	(8  * NEC_UNIT)
> > +#define NEC_REPEAT_SPACE	(4  * NEC_UNIT)
> >  #define NEC_BIT_PULSE		(1  * NEC_UNIT)
> >  #define NEC_BIT_0_SPACE		(1  * NEC_UNIT)
> >  #define NEC_BIT_1_SPACE		(3  * NEC_UNIT)
> 

[PATCH 07/13] IR: NECX: support repeat

[Maxim Levitsky]

This adds support for repeat detecting for NECX variant
Tested with uneversal remote

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
---
 drivers/media/IR/ir-core-priv.h   |    1 +
 drivers/media/IR/ir-nec-decoder.c |   16 ++++++++++++++--
 2 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/media/IR/ir-core-priv.h b/drivers/media/IR/ir-core-priv.h
index 84c7a9a..08383b9 100644
--- a/drivers/media/IR/ir-core-priv.h
+++ b/drivers/media/IR/ir-core-priv.h
@@ -45,6 +45,7 @@ struct ir_raw_event_ctrl {
 		int state;
 		unsigned count;
 		u32 bits;
+		bool is_nec_x;
 	} nec;
 	struct rc5_dec {
 		int state;
diff --git a/drivers/media/IR/ir-nec-decoder.c b/drivers/media/IR/ir-nec-decoder.c
index 1c0cf03..59127b1 100644
--- a/drivers/media/IR/ir-nec-decoder.c
+++ b/drivers/media/IR/ir-nec-decoder.c
@@ -26,6 +26,7 @@
 #define NEC_BIT_1_SPACE		(3  * NEC_UNIT)
 #define	NEC_TRAILER_PULSE	(1  * NEC_UNIT)
 #define	NEC_TRAILER_SPACE	(10 * NEC_UNIT) /* even longer in reality */
+#define NECX_REPEAT_BITS	1
 
 enum nec_state {
 	STATE_INACTIVE,
@@ -67,8 +68,11 @@ static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 		if (!ev.pulse)
 			break;
 
-		if (!eq_margin(ev.duration, NEC_HEADER_PULSE, NEC_UNIT / 2) &&
-		    !eq_margin(ev.duration, NECX_HEADER_PULSE, NEC_UNIT / 2))
+		if (eq_margin(ev.duration, NEC_HEADER_PULSE, NEC_UNIT / 2))
+			data->is_nec_x = false;
+		else if (eq_margin(ev.duration, NECX_HEADER_PULSE, NEC_UNIT / 2))
+			data->is_nec_x = true;
+		else
 			break;
 
 		data->count = 0;
@@ -105,6 +109,14 @@ static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 		if (ev.pulse)
 			break;
 
+		if (geq_margin(ev.duration, NEC_TRAILER_SPACE, NEC_UNIT / 2) &&
+			data->is_nec_x && data->count == NECX_REPEAT_BITS) {
+				IR_dprintk(1, "Repeat last key\n");
+				ir_repeat(input_dev);
+				data->state = STATE_INACTIVE;
+				return 0;
+			}
+
 		data->bits <<= 1;
 		if (eq_margin(ev.duration, NEC_BIT_1_SPACE, NEC_UNIT / 2))
 			data->bits |= 1;
-- 
1.7.0.4

[PATCH 08/13] IR: Allow not to compile keymaps in.

[Maxim Levitsky]

Currently, ir device registration fails if keymap requested by driver is not found.
Fix that by always compiling in the empty keymap, and using it as a failback.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
---
 drivers/media/IR/ir-core-priv.h     |    3 +-
 drivers/media/IR/ir-sysfs.c         |    2 +
 drivers/media/IR/keymaps/Makefile   |    1 -
 drivers/media/IR/keymaps/rc-empty.c |   44 -----------------------------------
 drivers/media/IR/rc-map.c           |   23 ++++++++++++++++++
 include/media/ir-core.h             |    8 ++++-
 6 files changed, 33 insertions(+), 48 deletions(-)
 delete mode 100644 drivers/media/IR/keymaps/rc-empty.c

diff --git a/drivers/media/IR/ir-core-priv.h b/drivers/media/IR/ir-core-priv.h
index 08383b9..e9c3cce 100644
--- a/drivers/media/IR/ir-core-priv.h
+++ b/drivers/media/IR/ir-core-priv.h
@@ -125,7 +125,8 @@ int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler);
 void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler);
 void ir_raw_init(void);
 
-
+int ir_rcmap_init(void);
+void ir_rcmap_cleanup(void);
 /*
  * Decoder initialization code
  *
diff --git a/drivers/media/IR/ir-sysfs.c b/drivers/media/IR/ir-sysfs.c
index a841e51..936dff8 100644
--- a/drivers/media/IR/ir-sysfs.c
+++ b/drivers/media/IR/ir-sysfs.c
@@ -341,6 +341,7 @@ static int __init ir_core_init(void)
 
 	/* Initialize/load the decoders/keymap code that will be used */
 	ir_raw_init();
+	ir_rcmap_init();
 
 	return 0;
 }
@@ -348,6 +349,7 @@ static int __init ir_core_init(void)
 static void __exit ir_core_exit(void)
 {
 	class_unregister(&ir_input_class);
+	ir_rcmap_cleanup();
 }
 
 module_init(ir_core_init);
diff --git a/drivers/media/IR/keymaps/Makefile b/drivers/media/IR/keymaps/Makefile
index 86d3d1f..24992cd 100644
--- a/drivers/media/IR/keymaps/Makefile
+++ b/drivers/media/IR/keymaps/Makefile
@@ -17,7 +17,6 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
 			rc-dm1105-nec.o \
 			rc-dntv-live-dvb-t.o \
 			rc-dntv-live-dvbt-pro.o \
-			rc-empty.o \
 			rc-em-terratec.o \
 			rc-encore-enltv2.o \
 			rc-encore-enltv.o \
diff --git a/drivers/media/IR/keymaps/rc-empty.c b/drivers/media/IR/keymaps/rc-empty.c
deleted file mode 100644
index 3b338d8..0000000
--- a/drivers/media/IR/keymaps/rc-empty.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/* empty.h - Keytable for empty Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* empty keytable, can be used as placeholder for not-yet created keytables */
-
-static struct ir_scancode empty[] = {
-	{ 0x2a, KEY_COFFEE },
-};
-
-static struct rc_keymap empty_map = {
-	.map = {
-		.scan    = empty,
-		.size    = ARRAY_SIZE(empty),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_EMPTY,
-	}
-};
-
-static int __init init_rc_map_empty(void)
-{
-	return ir_register_map(&empty_map);
-}
-
-static void __exit exit_rc_map_empty(void)
-{
-	ir_unregister_map(&empty_map);
-}
-
-module_init(init_rc_map_empty)
-module_exit(exit_rc_map_empty)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/rc-map.c b/drivers/media/IR/rc-map.c
index 46a8f15..689143f 100644
--- a/drivers/media/IR/rc-map.c
+++ b/drivers/media/IR/rc-map.c
@@ -82,3 +82,26 @@ void ir_unregister_map(struct rc_keymap *map)
 }
 EXPORT_SYMBOL_GPL(ir_unregister_map);
 
+
+static struct ir_scancode empty[] = {
+	{ 0x2a, KEY_COFFEE },
+};
+
+static struct rc_keymap empty_map = {
+	.map = {
+		.scan    = empty,
+		.size    = ARRAY_SIZE(empty),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_EMPTY,
+	}
+};
+
+int ir_rcmap_init(void)
+{
+	return ir_register_map(&empty_map);
+}
+
+void ir_rcmap_cleanup(void)
+{
+	ir_unregister_map(&empty_map);
+}
diff --git a/include/media/ir-core.h b/include/media/ir-core.h
index 513e60d..197d05a 100644
--- a/include/media/ir-core.h
+++ b/include/media/ir-core.h
@@ -110,8 +110,12 @@ static inline int ir_input_register(struct input_dev *dev,
 		return -EINVAL;
 
 	ir_codes = get_rc_map(map_name);
-	if (!ir_codes)
-		return -EINVAL;
+	if (!ir_codes) {
+		ir_codes = get_rc_map(RC_MAP_EMPTY);
+
+		if (!ir_codes)
+			return -EINVAL;
+	}
 
 	rc = __ir_input_register(dev, ir_codes, props, driver_name);
 	if (rc < 0)
-- 
1.7.0.4

[PATCH 09/13] IR: add helper function for hardware with small o/b buffer.

[Maxim Levitsky]

Some ir input devices have small buffer, and interrupt the host
each time it is full (or half full)

Add a helper that automaticly handles timeouts, and also
automaticly merges samples of same time (space-space)
Such samples might be placed by hardware because size of
sample in the buffer is small (a byte for example).

Also remove constness from ir_dev_props, because it now contains timeout
settings that driver might want to change

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
---
 drivers/media/IR/ir-core-priv.h |    1 +
 drivers/media/IR/ir-keytable.c  |    2 +-
 drivers/media/IR/ir-raw-event.c |   84 +++++++++++++++++++++++++++++++++++++++
 include/media/ir-core.h         |   23 +++++++++-
 4 files changed, 106 insertions(+), 4 deletions(-)

diff --git a/drivers/media/IR/ir-core-priv.h b/drivers/media/IR/ir-core-priv.h
index e9c3cce..30ff52c 100644
--- a/drivers/media/IR/ir-core-priv.h
+++ b/drivers/media/IR/ir-core-priv.h
@@ -41,6 +41,7 @@ struct ir_raw_event_ctrl {
 
 	/* raw decoder state follows */
 	struct ir_raw_event prev_ev;
+	struct ir_raw_event this_ev;
 	struct nec_dec {
 		int state;
 		unsigned count;
diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
index 94a8577..34b9c07 100644
--- a/drivers/media/IR/ir-keytable.c
+++ b/drivers/media/IR/ir-keytable.c
@@ -428,7 +428,7 @@ static void ir_close(struct input_dev *input_dev)
  */
 int __ir_input_register(struct input_dev *input_dev,
 		      const struct ir_scancode_table *rc_tab,
-		      const struct ir_dev_props *props,
+		      struct ir_dev_props *props,
 		      const char *driver_name)
 {
 	struct ir_input_dev *ir_dev;
diff --git a/drivers/media/IR/ir-raw-event.c b/drivers/media/IR/ir-raw-event.c
index d0c18db..43094e7 100644
--- a/drivers/media/IR/ir-raw-event.c
+++ b/drivers/media/IR/ir-raw-event.c
@@ -140,6 +140,90 @@ int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type typ
 EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
 
 /**
+ * ir_raw_event_store_with_filter() - pass next pulse/space to decoders with some processing
+ * @input_dev:	the struct input_dev device descriptor
+ * @type:	the type of the event that has occurred
+ *
+ * This routine (which may be called from an interrupt context) works
+ * in similiar manner to ir_raw_event_store_edge.
+ * This routine is intended for devices with limited internal buffer
+ * It automerges samples of same type, and handles timeouts
+ */
+int ir_raw_event_store_with_filter(struct input_dev *input_dev,
+						struct ir_raw_event *ev)
+{
+	struct ir_input_dev *ir = input_get_drvdata(input_dev);
+	struct ir_raw_event_ctrl *raw = ir->raw;
+
+	if (!raw || !ir->props)
+		return -EINVAL;
+
+	/* Ignore spaces in idle mode */
+	if (ir->idle && !ev->pulse)
+		return 0;
+	else if (ir->idle)
+		ir_raw_event_set_idle(input_dev, 0);
+
+	if (!raw->this_ev.duration) {
+		raw->this_ev = *ev;
+	} else if (ev->pulse == raw->this_ev.pulse) {
+		raw->this_ev.duration += ev->duration;
+	} else {
+		ir_raw_event_store(input_dev, &raw->this_ev);
+		raw->this_ev = *ev;
+	}
+
+	/* Enter idle mode if nessesary */
+	if (!ev->pulse && ir->props->timeout &&
+		raw->this_ev.duration >= ir->props->timeout)
+		ir_raw_event_set_idle(input_dev, 1);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_store_with_filter);
+
+void ir_raw_event_set_idle(struct input_dev *input_dev, int idle)
+{
+	struct ir_input_dev *ir = input_get_drvdata(input_dev);
+	struct ir_raw_event_ctrl *raw = ir->raw;
+	ktime_t now;
+	u64 delta;
+
+	if (!ir->props)
+		return;
+
+	if (!ir->raw)
+		goto out;
+
+	if (idle) {
+		IR_dprintk(2, "enter idle mode\n");
+		raw->last_event = ktime_get();
+	} else {
+		IR_dprintk(2, "exit idle mode\n");
+
+		now = ktime_get();
+		delta = ktime_to_ns(ktime_sub(now, ir->raw->last_event));
+
+		WARN_ON(raw->this_ev.pulse);
+
+		raw->this_ev.duration =
+			min(raw->this_ev.duration + delta,
+						(u64)IR_MAX_DURATION);
+
+		ir_raw_event_store(input_dev, &raw->this_ev);
+
+		if (raw->this_ev.duration == IR_MAX_DURATION)
+			ir_raw_event_reset(input_dev);
+
+		raw->this_ev.duration = 0;
+	}
+out:
+	if (ir->props->s_idle)
+		ir->props->s_idle(ir->props->priv, idle);
+	ir->idle = idle;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_set_idle);
+
+/**
  * ir_raw_event_handle() - schedules the decoding of stored ir data
  * @input_dev:	the struct input_dev device descriptor
  *
diff --git a/include/media/ir-core.h b/include/media/ir-core.h
index 197d05a..7ad39fe 100644
--- a/include/media/ir-core.h
+++ b/include/media/ir-core.h
@@ -41,6 +41,9 @@ enum rc_driver_type {
  *	anything with it. Yet, as the same keycode table can be used with other
  *	devices, a mask is provided to allow its usage. Drivers should generally
  *	leave this field in blank
+ * @timeout: optional time after which device stops sending data
+ * @min_timeout: minimum timeout supported by device
+ * @max_timeout: maximum timeout supported by device
  * @priv: driver-specific data, to be used on the callbacks
  * @change_protocol: allow changing the protocol used on hardware decoders
  * @open: callback to allow drivers to enable polling/irq when IR input device
@@ -50,11 +53,19 @@ enum rc_driver_type {
  * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs)
  * @s_tx_carrier: set transmit carrier frequency
  * @tx_ir: transmit IR
+ * @s_idle: optional: enable/disable hardware idle mode, upon which,
+ *	device doesn't interrupt host untill it sees IR data
  */
 struct ir_dev_props {
 	enum rc_driver_type	driver_type;
 	unsigned long		allowed_protos;
 	u32			scanmask;
+
+	u64			timeout;
+	u64			min_timeout;
+	u64			max_timeout;
+
+
 	void			*priv;
 	int			(*change_protocol)(void *priv, u64 ir_type);
 	int			(*open)(void *priv);
@@ -62,6 +73,7 @@ struct ir_dev_props {
 	int			(*s_tx_mask)(void *priv, u32 mask);
 	int			(*s_tx_carrier)(void *priv, u32 carrier);
 	int			(*tx_ir)(void *priv, int *txbuf, u32 n);
+	void			(*s_idle)(void *priv, int enable);
 };
 
 struct ir_input_dev {
@@ -69,9 +81,10 @@ struct ir_input_dev {
 	char				*driver_name;	/* Name of the driver module */
 	struct ir_scancode_table	rc_tab;		/* scan/key table */
 	unsigned long			devno;		/* device number */
-	const struct ir_dev_props	*props;		/* Device properties */
+	struct ir_dev_props		*props;		/* Device properties */
 	struct ir_raw_event_ctrl	*raw;		/* for raw pulse/space events */
 	struct input_dev		*input_dev;	/* the input device associated with this device */
+	bool				idle;
 
 	/* key info - needed by IR keycode handlers */
 	spinlock_t			keylock;	/* protects the below members */
@@ -95,12 +108,12 @@ enum raw_event_type {
 /* From ir-keytable.c */
 int __ir_input_register(struct input_dev *dev,
 		      const struct ir_scancode_table *ir_codes,
-		      const struct ir_dev_props *props,
+		      struct ir_dev_props *props,
 		      const char *driver_name);
 
 static inline int ir_input_register(struct input_dev *dev,
 		      const char *map_name,
-		      const struct ir_dev_props *props,
+		      struct ir_dev_props *props,
 		      const char *driver_name) {
 	struct ir_scancode_table *ir_codes;
 	struct ir_input_dev *ir_dev;
@@ -148,6 +161,10 @@ struct ir_raw_event {
 void ir_raw_event_handle(struct input_dev *input_dev);
 int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev);
 int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type);
+int ir_raw_event_store_with_filter(struct input_dev *input_dev,
+				struct ir_raw_event *ev);
+void ir_raw_event_set_idle(struct input_dev *input_dev, int idle);
+
 static inline void ir_raw_event_reset(struct input_dev *input_dev)
 {
 	struct ir_raw_event ev = { .pulse = false, .duration = 0 };
-- 
1.7.0.4

[PATCH 10/13] IR: extend interfaces to support more device settings LIRC: add new IOCTL that enables learning mode (wide band receiver)

[Maxim Levitsky]

Still missing features: carrier report & timeout reports.
Will need to pack these into ir_raw_event


Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
---
 drivers/media/IR/ir-core-priv.h  |    1 +
 drivers/media/IR/ir-lirc-codec.c |  112 +++++++++++++++++++++++++++++++-------
 include/media/ir-core.h          |   14 +++++
 include/media/lirc.h             |    5 ++-
 4 files changed, 112 insertions(+), 20 deletions(-)

diff --git a/drivers/media/IR/ir-core-priv.h b/drivers/media/IR/ir-core-priv.h
index 30ff52c..52253b4 100644
--- a/drivers/media/IR/ir-core-priv.h
+++ b/drivers/media/IR/ir-core-priv.h
@@ -78,6 +78,7 @@ struct ir_raw_event_ctrl {
 	struct lirc_codec {
 		struct ir_input_dev *ir_dev;
 		struct lirc_driver *drv;
+		int carrier_low;
 	} lirc;
 };
 
diff --git a/drivers/media/IR/ir-lirc-codec.c b/drivers/media/IR/ir-lirc-codec.c
index 8ca01fd..5d5150f 100644
--- a/drivers/media/IR/ir-lirc-codec.c
+++ b/drivers/media/IR/ir-lirc-codec.c
@@ -46,7 +46,6 @@ static int ir_lirc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 	IR_dprintk(2, "LIRC data transfer started (%uus %s)\n",
 		   TO_US(ev.duration), TO_STR(ev.pulse));
 
-
 	sample = ev.duration / 1000;
 	if (ev.pulse)
 		sample |= PULSE_BIT;
@@ -96,13 +95,14 @@ out:
 	return ret;
 }
 
-static long ir_lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
+static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
+			unsigned long __user arg)
 {
 	struct lirc_codec *lirc;
 	struct ir_input_dev *ir_dev;
 	int ret = 0;
 	void *drv_data;
-	unsigned long val;
+	unsigned long val = 0;
 
 	lirc = lirc_get_pdata(filep);
 	if (!lirc)
@@ -114,47 +114,106 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long ar
 
 	drv_data = ir_dev->props->priv;
 
-	switch (cmd) {
-	case LIRC_SET_TRANSMITTER_MASK:
+	if (_IOC_DIR(cmd) & _IOC_WRITE) {
 		ret = get_user(val, (unsigned long *)arg);
 		if (ret)
 			return ret;
+	}
+
+	switch (cmd) {
+
+	/* legacy support */
+	case LIRC_GET_SEND_MODE:
+		val = LIRC_CAN_SEND_PULSE & LIRC_CAN_SEND_MASK;
+		break;
+
+	case LIRC_SET_SEND_MODE:
+		if (val != (LIRC_MODE_PULSE & LIRC_CAN_SEND_MASK))
+			return -EINVAL;
+		break;
 
-		if (ir_dev->props && ir_dev->props->s_tx_mask)
+	/* TX settings */
+	case LIRC_SET_TRANSMITTER_MASK:
+		if (ir_dev->props->s_tx_mask)
 			ret = ir_dev->props->s_tx_mask(drv_data, (u32)val);
 		else
 			return -EINVAL;
 		break;
 
 	case LIRC_SET_SEND_CARRIER:
-		ret = get_user(val, (unsigned long *)arg);
-		if (ret)
-			return ret;
-
-		if (ir_dev->props && ir_dev->props->s_tx_carrier)
+		if (ir_dev->props->s_tx_carrier)
 			ir_dev->props->s_tx_carrier(drv_data, (u32)val);
 		else
 			return -EINVAL;
 		break;
 
-	case LIRC_GET_SEND_MODE:
-		val = LIRC_CAN_SEND_PULSE & LIRC_CAN_SEND_MASK;
-		ret = put_user(val, (unsigned long *)arg);
+	case LIRC_SET_SEND_DUTY_CYCLE:
+		if (!ir_dev->props->s_tx_duty_cycle)
+			return -ENOSYS;
+
+		if (val <= 0 || val >= 100)
+			return -EINVAL;
+
+		ir_dev->props->s_tx_duty_cycle(ir_dev->props->priv, val);
 		break;
 
-	case LIRC_SET_SEND_MODE:
-		ret = get_user(val, (unsigned long *)arg);
-		if (ret)
-			return ret;
+	/* RX settings */
+	case LIRC_SET_REC_CARRIER:
+		if (ir_dev->props->s_rx_carrier_range)
+			ret = ir_dev->props->s_rx_carrier_range(
+				ir_dev->props->priv,
+				ir_dev->raw->lirc.carrier_low, val);
+		else
+			return -ENOSYS;
 
-		if (val != (LIRC_MODE_PULSE & LIRC_CAN_SEND_MASK))
+		if (!ret)
+			ir_dev->raw->lirc.carrier_low = 0;
+		break;
+
+	case LIRC_SET_REC_CARRIER_RANGE:
+		if (val >= 0)
+			ir_dev->raw->lirc.carrier_low = val;
+		break;
+
+
+	case LIRC_GET_REC_RESOLUTION:
+		val = ir_dev->props->rx_resolution;
+		break;
+
+	case LIRC_SET_WIDEBAND_RECEIVER:
+		if (ir_dev->props->s_learning_mode)
+			return ir_dev->props->s_learning_mode(
+				ir_dev->props->priv, !!val);
+		else
+			return -ENOSYS;
+
+	/* Generic timeout support */
+	case LIRC_GET_MIN_TIMEOUT:
+		if (!ir_dev->props->max_timeout)
+			return -ENOSYS;
+		val = ir_dev->props->min_timeout / 1000;
+		break;
+
+	case LIRC_GET_MAX_TIMEOUT:
+		if (!ir_dev->props->max_timeout)
+			return -ENOSYS;
+		val = ir_dev->props->max_timeout / 1000;
+		break;
+
+	case LIRC_SET_REC_TIMEOUT:
+		if (val < ir_dev->props->min_timeout ||
+		    val > ir_dev->props->max_timeout)
 			return -EINVAL;
+		ir_dev->props->timeout = val * 1000;
 		break;
 
 	default:
 		return lirc_dev_fop_ioctl(filep, cmd, arg);
 	}
 
+	if (_IOC_DIR(cmd) & _IOC_READ)
+		ret = put_user(val, (unsigned long *)arg);
+
 	return ret;
 }
 
@@ -200,13 +259,28 @@ static int ir_lirc_register(struct input_dev *input_dev)
 
 	features = LIRC_CAN_REC_MODE2;
 	if (ir_dev->props->tx_ir) {
+
 		features |= LIRC_CAN_SEND_PULSE;
 		if (ir_dev->props->s_tx_mask)
 			features |= LIRC_CAN_SET_TRANSMITTER_MASK;
 		if (ir_dev->props->s_tx_carrier)
 			features |= LIRC_CAN_SET_SEND_CARRIER;
+
+		if (ir_dev->props->s_tx_duty_cycle)
+			features |= LIRC_CAN_SET_REC_DUTY_CYCLE;
 	}
 
+	if (ir_dev->props->s_rx_carrier_range)
+		features |= LIRC_CAN_SET_REC_CARRIER |
+			LIRC_CAN_SET_REC_CARRIER_RANGE;
+
+	if (ir_dev->props->s_learning_mode)
+		features |= LIRC_CAN_HAVE_WIDEBAND_RECEIVER;
+
+	if (ir_dev->props->max_timeout)
+		features |= LIRC_CAN_SET_REC_TIMEOUT;
+
+
 	snprintf(drv->name, sizeof(drv->name), "ir-lirc-codec (%s)",
 		 ir_dev->driver_name);
 	drv->minor = -1;
diff --git a/include/media/ir-core.h b/include/media/ir-core.h
index 7ad39fe..ed9c1cb 100644
--- a/include/media/ir-core.h
+++ b/include/media/ir-core.h
@@ -44,6 +44,8 @@ enum rc_driver_type {
  * @timeout: optional time after which device stops sending data
  * @min_timeout: minimum timeout supported by device
  * @max_timeout: maximum timeout supported by device
+ * @rx_resolution : resolution (in ns) of input sampler
+ * @tx_resolution: resolution (in ns) of output sampler
  * @priv: driver-specific data, to be used on the callbacks
  * @change_protocol: allow changing the protocol used on hardware decoders
  * @open: callback to allow drivers to enable polling/irq when IR input device
@@ -52,9 +54,16 @@ enum rc_driver_type {
  *	is opened.
  * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs)
  * @s_tx_carrier: set transmit carrier frequency
+ * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%)
+ * @s_rx_carrier: inform driver about carrier it is expected to handle
  * @tx_ir: transmit IR
  * @s_idle: optional: enable/disable hardware idle mode, upon which,
+<<<<<<< current
  *	device doesn't interrupt host untill it sees IR data
+=======
+	device doesn't interrupt host untill it sees IR data
+ * @s_learning_mode: enable wide band receiver used for learning
+>>>>>>> patched
  */
 struct ir_dev_props {
 	enum rc_driver_type	driver_type;
@@ -65,6 +74,8 @@ struct ir_dev_props {
 	u64			min_timeout;
 	u64			max_timeout;
 
+	u32			rx_resolution;
+	u32			tx_resolution;
 
 	void			*priv;
 	int			(*change_protocol)(void *priv, u64 ir_type);
@@ -72,8 +83,11 @@ struct ir_dev_props {
 	void			(*close)(void *priv);
 	int			(*s_tx_mask)(void *priv, u32 mask);
 	int			(*s_tx_carrier)(void *priv, u32 carrier);
+	int			(*s_tx_duty_cycle)(void *priv, u32 duty_cycle);
+	int			(*s_rx_carrier_range)(void *priv, u32 min, u32 max);
 	int			(*tx_ir)(void *priv, int *txbuf, u32 n);
 	void			(*s_idle)(void *priv, int enable);
+	int			(*s_learning_mode)(void *priv, int enable);
 };
 
 struct ir_input_dev {
diff --git a/include/media/lirc.h b/include/media/lirc.h
index 42c467c..bda3d03 100644
--- a/include/media/lirc.h
+++ b/include/media/lirc.h
@@ -77,6 +77,7 @@
 #define LIRC_CAN_SET_REC_FILTER           0x08000000
 
 #define LIRC_CAN_MEASURE_CARRIER          0x02000000
+#define LIRC_CAN_HAVE_WIDEBAND_RECEIVER   0x04000000
 
 #define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK)
 #define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK)
@@ -145,7 +146,7 @@
  * if enabled from the next key press on the driver will send
  * LIRC_MODE2_FREQUENCY packets
  */
-#define LIRC_SET_MEASURE_CARRIER_MODE  _IOW('i', 0x0000001d, __u32)
+#define LIRC_SET_MEASURE_CARRIER_MODE	_IOW('i', 0x0000001d, __u32)
 
 /*
  * to set a range use
@@ -162,4 +163,6 @@
 #define LIRC_SETUP_START               _IO('i', 0x00000021)
 #define LIRC_SETUP_END                 _IO('i', 0x00000022)
 
+#define LIRC_SET_WIDEBAND_RECEIVER     _IOW('i', 0x00000023, __u32)
+
 #endif
-- 
1.7.0.4

Re: [PATCH 10/13] IR: extend interfaces to support more device settings LIRC: add new IOCTL that enables learning mode (wide band receiver)

[Christoph Bartelmus]

Hi!

Maxim Levitsky "maximlevitsky@gmail.com" wrote:

> Still missing features: carrier report & timeout reports.
> Will need to pack these into ir_raw_event


Hm, this patch changes the LIRC interface but I can't see the according  
patch to the documentation.

[...]
>   * @tx_ir: transmit IR
>   * @s_idle: optional: enable/disable hardware idle mode, upon which,
> +<<<<<<< current
>   *	device doesn't interrupt host untill it sees IR data
> +=======

Huh?

> +	device doesn't interrupt host untill it sees IR data
> + * @s_learning_mode: enable wide band receiver used for learning
+>>>>>>>> patched

s/untill/until/

[...]
>  #define LIRC_CAN_MEASURE_CARRIER          0x02000000
> +#define LIRC_CAN_HAVE_WIDEBAND_RECEIVER   0x04000000

LIRC_CAN_USE_WIDEBAND_RECEIVER

[...]
> @@ -145,7 +146,7 @@
>   * if enabled from the next key press on the driver will send
>   * LIRC_MODE2_FREQUENCY packets
>   */
> -#define LIRC_SET_MEASURE_CARRIER_MODE  _IOW('i', 0x0000001d, __u32)
> +#define LIRC_SET_MEASURE_CARRIER_MODE	_IOW('i', 0x0000001d, __u32)
>
>  /*
>   * to set a range use
> @@ -162,4 +163,6 @@
>  #define LIRC_SETUP_START               _IO('i', 0x00000021)
>  #define LIRC_SETUP_END                 _IO('i', 0x00000022)
>
> +#define LIRC_SET_WIDEBAND_RECEIVER     _IOW('i', 0x00000023, __u32)

If you really want this new ioctl, then it should be clarified how it  
behaves in relation to LIRC_SET_MEASURE_CARRIER_MODE.

Do you have to enable the wide-band receiver explicitly before you can  
enable carrier reports or does enabling carrier reports implicitly switch  
to the wide-band receiver?

What happens if carrier mode is enabled and you explicitly turn off the  
wide-band receiver?

And while we're at interface stuff:
Do we really need LIRC_SETUP_START and LIRC_SETUP_END? It is only used  
once in lircd during startup.

Christoph

Re: [PATCH 10/13] IR: extend interfaces to support more device settings LIRC: add new IOCTL that enables learning mode (wide band receiver)

[Maxim Levitsky]

On Fri, 2010-07-30 at 23:22 +0200, Christoph Bartelmus wrote: 
> Hi!
> 
> Maxim Levitsky "maximlevitsky@gmail.com" wrote:
> 
> > Still missing features: carrier report & timeout reports.
> > Will need to pack these into ir_raw_event
> 
> 
> Hm, this patch changes the LIRC interface but I can't see the according  
> patch to the documentation.
> 
> [...]
> >   * @tx_ir: transmit IR
> >   * @s_idle: optional: enable/disable hardware idle mode, upon which,
> > +<<<<<<< current
> >   *	device doesn't interrupt host untill it sees IR data
> > +=======
> 
> Huh?
:-)


> 
> > +	device doesn't interrupt host untill it sees IR data
> > + * @s_learning_mode: enable wide band receiver used for learning
> +>>>>>>>> patched
> 
> s/untill/until/
> 
> [...]
> >  #define LIRC_CAN_MEASURE_CARRIER          0x02000000
> > +#define LIRC_CAN_HAVE_WIDEBAND_RECEIVER   0x04000000
> 
> LIRC_CAN_USE_WIDEBAND_RECEIVER

OK. 
> 
> [...]
> > @@ -145,7 +146,7 @@
> >   * if enabled from the next key press on the driver will send
> >   * LIRC_MODE2_FREQUENCY packets
> >   */
> > -#define LIRC_SET_MEASURE_CARRIER_MODE  _IOW('i', 0x0000001d, __u32)
> > +#define LIRC_SET_MEASURE_CARRIER_MODE	_IOW('i', 0x0000001d, __u32)
> >
> >  /*
> >   * to set a range use
> > @@ -162,4 +163,6 @@
> >  #define LIRC_SETUP_START               _IO('i', 0x00000021)
> >  #define LIRC_SETUP_END                 _IO('i', 0x00000022)
> >
> > +#define LIRC_SET_WIDEBAND_RECEIVER     _IOW('i', 0x00000023, __u32)
> 
> If you really want this new ioctl, then it should be clarified how it  
> behaves in relation to LIRC_SET_MEASURE_CARRIER_MODE.

In my opinion, I won't need the LIRC_SET_MEASURE_CARRIER_MODE,
I would just optionally turn that on in learning mode.
You disagree, and since that is not important (besides TX and learning
features are present only at fraction of ENE devices. The only user I
did the debugging with, doesn't seem to want to help debug that code
anymore...)

But anyway, in current state I want these features to be independent.
Driver will enable learning mode if it have to.

I'll add the documentation.



> 
> Do you have to enable the wide-band receiver explicitly before you can  
> enable carrier reports or does enabling carrier reports implicitly switch  
> to the wide-band receiver?
I would implicitly switch the learning mode on, untill user turns off
the carrier reports.

> 
> What happens if carrier mode is enabled and you explicitly turn off the  
> wide-band receiver?
Wouldn't it be better to have one ioctl for both after all?

> 
> And while we're at interface stuff:
> Do we really need LIRC_SETUP_START and LIRC_SETUP_END? It is only used  
> once in lircd during startup.
I don't think so.

Best regards,
Maxim Levitsky

Re: [PATCH 10/13] IR: extend interfaces to support more device settings LIRC: add new IOCTL that enables learning mode (wide band receiver)

[Christoph Bartelmus]

Hi Maxim,

on 31 Jul 10 at 01:01, Maxim Levitsky wrote:
> On Fri, 2010-07-30 at 23:22 +0200, Christoph Bartelmus wrote:
[...]
>>> +#define LIRC_SET_WIDEBAND_RECEIVER     _IOW('i', 0x00000023, __u32)
>>
>> If you really want this new ioctl, then it should be clarified how it
>> behaves in relation to LIRC_SET_MEASURE_CARRIER_MODE.

> In my opinion, I won't need the LIRC_SET_MEASURE_CARRIER_MODE,
> I would just optionally turn that on in learning mode.
> You disagree, and since that is not important (besides TX and learning
> features are present only at fraction of ENE devices. The only user I
> did the debugging with, doesn't seem to want to help debug that code
> anymore...)
>
> But anyway, in current state I want these features to be independent.
> Driver will enable learning mode if it have to.

Please avoid the term "learning mode" as to you it probably means  
something different than to me.

>
> I'll add the documentation.

>>
>> Do you have to enable the wide-band receiver explicitly before you can
>> enable carrier reports or does enabling carrier reports implicitly switch
>> to the wide-band receiver?
> I would implicitly switch the learning mode on, untill user turns off
> the carrier reports.

You mean that you'll implicitly switch on the wide-band receiver. Ok.

>>
>> What happens if carrier mode is enabled and you explicitly turn off the
>> wide-band receiver?
> Wouldn't it be better to have one ioctl for both after all?

There may be hardware that allows carrier measurement but does not have a  
wide-band receiver. And there may be hardware that does have a wide-band  
receiver but does not allow carrier measurement. irrecord needs to be able  
to distinguish these cases, so we need separate ioctls.

I'd say: carrier reports may switch on the wide-band reciever implicitly.  
In that case the wide-band receiver cannot be switched off explicitly  
until carrier reports are disabled again. It just needs to be documented.

>>
>> And while we're at interface stuff:
>> Do we really need LIRC_SETUP_START and LIRC_SETUP_END? It is only used
>> once in lircd during startup.
> I don't think so.
>

Christoph

Re: [PATCH 10/13] IR: extend interfaces to support more device settings LIRC: add new IOCTL that enables learning mode (wide band receiver)

[Maxim Levitsky]

On Sat, 2010-07-31 at 10:10 +0200, Christoph Bartelmus wrote: 
> Hi Maxim,
> 
> on 31 Jul 10 at 01:01, Maxim Levitsky wrote:
> > On Fri, 2010-07-30 at 23:22 +0200, Christoph Bartelmus wrote:
> [...]
> >>> +#define LIRC_SET_WIDEBAND_RECEIVER     _IOW('i', 0x00000023, __u32)
> >>
> >> If you really want this new ioctl, then it should be clarified how it
> >> behaves in relation to LIRC_SET_MEASURE_CARRIER_MODE.
> 
> > In my opinion, I won't need the LIRC_SET_MEASURE_CARRIER_MODE,
> > I would just optionally turn that on in learning mode.
> > You disagree, and since that is not important (besides TX and learning
> > features are present only at fraction of ENE devices. The only user I
> > did the debugging with, doesn't seem to want to help debug that code
> > anymore...)
> >
> > But anyway, in current state I want these features to be independent.
> > Driver will enable learning mode if it have to.
> 
> Please avoid the term "learning mode" as to you it probably means  
> something different than to me.
> 
> >
> > I'll add the documentation.
> 
> >>
> >> Do you have to enable the wide-band receiver explicitly before you can
> >> enable carrier reports or does enabling carrier reports implicitly switch
> >> to the wide-band receiver?
> > I would implicitly switch the learning mode on, untill user turns off
> > the carrier reports.
> 
> You mean that you'll implicitly switch on the wide-band receiver. Ok.
> 
> >>
> >> What happens if carrier mode is enabled and you explicitly turn off the
> >> wide-band receiver?
> > Wouldn't it be better to have one ioctl for both after all?
> 
> There may be hardware that allows carrier measurement but does not have a  
> wide-band receiver. And there may be hardware that does have a wide-band  
> receiver but does not allow carrier measurement. irrecord needs to be able  
> to distinguish these cases, so we need separate ioctls.
> 
> I'd say: carrier reports may switch on the wide-band reciever implicitly.  
> In that case the wide-band receiver cannot be switched off explicitly  
> until carrier reports are disabled again. It just needs to be documented.

No problem.

Best regards,
Maxim Levitsky

[PATCH 11/13] IR: report unknown scancodes the in-kernel decoders found.

[Maxim Levitsky]

This way it is possible to use evtest to create keymap for unknown remote.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
---
 drivers/media/IR/ir-keytable.c |    8 ++++++++
 1 files changed, 8 insertions(+), 0 deletions(-)

diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
index 34b9c07..ba7678a 100644
--- a/drivers/media/IR/ir-keytable.c
+++ b/drivers/media/IR/ir-keytable.c
@@ -339,6 +339,8 @@ void ir_repeat(struct input_dev *dev)
 
 	spin_lock_irqsave(&ir->keylock, flags);
 
+	input_event(dev, EV_MSC, MSC_SCAN, ir->last_scancode);
+
 	if (!ir->keypressed)
 		goto out;
 
@@ -370,6 +372,8 @@ void ir_keydown(struct input_dev *dev, int scancode, u8 toggle)
 
 	spin_lock_irqsave(&ir->keylock, flags);
 
+	input_event(dev, EV_MSC, MSC_SCAN, scancode);
+
 	/* Repeat event? */
 	if (ir->keypressed &&
 	    ir->last_scancode == scancode &&
@@ -383,9 +387,11 @@ void ir_keydown(struct input_dev *dev, int scancode, u8 toggle)
 	ir->last_toggle = toggle;
 	ir->last_keycode = keycode;
 
+
 	if (keycode == KEY_RESERVED)
 		goto out;
 
+
 	/* Register a keypress */
 	ir->keypressed = true;
 	IR_dprintk(1, "%s: key down event, key 0x%04x, scancode 0x%04x\n",
@@ -480,6 +486,8 @@ int __ir_input_register(struct input_dev *input_dev,
 
 	set_bit(EV_KEY, input_dev->evbit);
 	set_bit(EV_REP, input_dev->evbit);
+	set_bit(EV_MSC, input_dev->evbit);
+	set_bit(MSC_SCAN, input_dev->mscbit);
 
 	if (ir_setkeytable(input_dev, &ir_dev->rc_tab, rc_tab)) {
 		rc = -ENOMEM;
-- 
1.7.0.4

[PATCH 12/13] STAGING: remove lirc_ene0100 driver.

[Maxim Levitsky]

Add latest unported version of this driver to media/IR.
Next patch will port it to ir core.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
---
 drivers/media/IR/ene_ir.c           | 1176 +++++++++++++++++++++++++++++++++++
 drivers/media/IR/ene_ir.h           |  240 +++++++
 drivers/staging/lirc/Kconfig        |    8 -
 drivers/staging/lirc/Makefile       |    1 -
 drivers/staging/lirc/lirc_ene0100.c |  646 -------------------
 drivers/staging/lirc/lirc_ene0100.h |  169 -----
 6 files changed, 1416 insertions(+), 824 deletions(-)
 create mode 100644 drivers/media/IR/ene_ir.c
 create mode 100644 drivers/media/IR/ene_ir.h
 delete mode 100644 drivers/staging/lirc/lirc_ene0100.c
 delete mode 100644 drivers/staging/lirc/lirc_ene0100.h

diff --git a/drivers/media/IR/ene_ir.c b/drivers/media/IR/ene_ir.c
new file mode 100644
index 0000000..9d11caf
--- /dev/null
+++ b/drivers/media/IR/ene_ir.c
@@ -0,0 +1,1176 @@
+/*
+ * driver for ENE KB3926 B/C/D CIR (also known as ENE0100/ENE0200/ENE0201)
+ *
+ * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pnp.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+#include "lirc_ene0100.h"
+
+
+static int sample_period = -1;
+static int enable_idle = 1;
+static int enable_duty_carrier;
+static int input = 1;
+static int debug;
+static int txsim;
+
+static void ene_rx_set_idle(struct ene_device *dev, int idle);
+static int ene_irq_status(struct ene_device *dev);
+static void ene_send_sample(struct ene_device *dev, unsigned long sample);
+
+/* read a hardware register */
+static u8 ene_hw_read_reg(struct ene_device *dev, u16 reg)
+{
+	u8 retval;
+	outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+	outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+	retval = inb(dev->hw_io + ENE_IO);
+
+	ene_dbg_verbose("reg %04x == %02x", reg, retval);
+	return retval;
+}
+
+/* write a hardware register */
+static void ene_hw_write_reg(struct ene_device *dev, u16 reg, u8 value)
+{
+	outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+	outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+	outb(value, dev->hw_io + ENE_IO);
+
+	ene_dbg_verbose("reg %04x <- %02x", reg, value);
+}
+
+/* change specific bits in hardware register */
+static void ene_hw_write_reg_mask(struct ene_device *dev,
+				  u16 reg, u8 value, u8 mask)
+{
+	u8 regvalue;
+
+	outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+	outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+
+	regvalue = inb(dev->hw_io + ENE_IO) & ~mask;
+	regvalue |= (value & mask);
+	outb(regvalue, dev->hw_io + ENE_IO);
+
+	ene_dbg_verbose("reg %04x <- %02x (mask=%02x)", reg, value, mask);
+}
+
+/* detect hardware features */
+static int ene_hw_detect(struct ene_device *dev)
+{
+	u8 chip_major, chip_minor;
+	u8 hw_revision, old_ver;
+	u8 tmp;
+	u8 fw_capabilities;
+
+	tmp = ene_hw_read_reg(dev, ENE_HW_UNK);
+	ene_hw_write_reg(dev, ENE_HW_UNK, tmp & ~ENE_HW_UNK_CLR);
+
+	chip_major = ene_hw_read_reg(dev, ENE_HW_VER_MAJOR);
+	chip_minor = ene_hw_read_reg(dev, ENE_HW_VER_MINOR);
+
+	ene_hw_write_reg(dev, ENE_HW_UNK, tmp);
+	hw_revision = ene_hw_read_reg(dev, ENE_HW_VERSION);
+	old_ver = ene_hw_read_reg(dev, ENE_HW_VER_OLD);
+
+	if (hw_revision == 0xFF) {
+
+		ene_printk(KERN_WARNING, "device seems to be disabled\n");
+		ene_printk(KERN_WARNING,
+			"send a mail to lirc-list@lists.sourceforge.net\n");
+		ene_printk(KERN_WARNING, "please attach output of acpidump\n");
+		return -ENODEV;
+	}
+
+	if (chip_major == 0x33) {
+		ene_printk(KERN_WARNING, "chips 0x33xx aren't supported\n");
+		return -ENODEV;
+	}
+
+	if (chip_major == 0x39 && chip_minor == 0x26 && hw_revision == 0xC0) {
+		dev->hw_revision = ENE_HW_C;
+	} else if (old_ver == 0x24 && hw_revision == 0xC0) {
+		dev->hw_revision = ENE_HW_B;
+		ene_printk(KERN_NOTICE, "KB3926B detected\n");
+	} else {
+		dev->hw_revision = ENE_HW_D;
+		ene_printk(KERN_WARNING,
+			"unknown ENE chip detected, assuming KB3926D\n");
+		ene_printk(KERN_WARNING,
+			"driver support might be not complete");
+
+	}
+
+	ene_printk(KERN_DEBUG,
+		"chip is 0x%02x%02x - kbver = 0x%02x, rev = 0x%02x\n",
+			chip_major, chip_minor, old_ver, hw_revision);
+
+	/* detect features hardware supports */
+	if (dev->hw_revision < ENE_HW_C)
+		return 0;
+
+	fw_capabilities = ene_hw_read_reg(dev, ENE_FW2);
+	ene_dbg("Firmware capabilities: %02x", fw_capabilities);
+
+	dev->hw_gpio40_learning = fw_capabilities & ENE_FW2_GP40_AS_LEARN;
+	dev->hw_learning_and_tx_capable = fw_capabilities & ENE_FW2_LEARNING;
+
+	dev->hw_fan_as_normal_input = dev->hw_learning_and_tx_capable &&
+	    (fw_capabilities & ENE_FW2_FAN_AS_NRML_IN);
+
+	ene_printk(KERN_NOTICE, "hardware features:\n");
+	ene_printk(KERN_NOTICE,
+		"learning and transmit %s, gpio40_learn %s, fan_in %s\n",
+	       dev->hw_learning_and_tx_capable ? "on" : "off",
+	       dev->hw_gpio40_learning ? "on" : "off",
+	       dev->hw_fan_as_normal_input ? "on" : "off");
+
+	if (dev->hw_learning_and_tx_capable) {
+		ene_printk(KERN_WARNING,
+		"Device supports transmitting, but that support is\n");
+		ene_printk(KERN_WARNING,
+		"lightly tested. Please test it and mail\n");
+		ene_printk(KERN_WARNING,
+		"lirc-list@lists.sourceforge.net\n");
+	}
+	return 0;
+}
+
+/* this enables/disables IR input via gpio40*/
+static void ene_enable_gpio40_recieve(struct ene_device *dev, int enable)
+{
+	ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, enable ?
+			      0 : ENE_CIR_CONF2_GPIO40DIS,
+			      ENE_CIR_CONF2_GPIO40DIS);
+}
+
+/* this enables/disables IR via standard input */
+static void ene_enable_normal_recieve(struct ene_device *dev, int enable)
+{
+	ene_hw_write_reg(dev, ENE_CIR_CONF1, enable ? ENE_CIR_CONF1_RX_ON : 0);
+}
+
+/* this enables/disables IR input via unused fan tachtometer input */
+static void ene_enable_fan_recieve(struct ene_device *dev, int enable)
+{
+	if (!enable)
+		ene_hw_write_reg(dev, ENE_FAN_AS_IN1, 0);
+	else {
+		ene_hw_write_reg(dev, ENE_FAN_AS_IN1, ENE_FAN_AS_IN1_EN);
+		ene_hw_write_reg(dev, ENE_FAN_AS_IN2, ENE_FAN_AS_IN2_EN);
+	}
+	dev->rx_fan_input_inuse = enable;
+}
+
+
+/* Sense current recieved carrier */
+static int ene_rx_sense_carrier(struct ene_device *dev)
+{
+	int period = ene_hw_read_reg(dev, ENE_RX_CARRIER);
+	int carrier;
+	ene_dbg("RX: hardware carrier period = %02x", period);
+
+	if (!(period & ENE_RX_CARRIER_VALID))
+		return 0;
+
+	period &= ~ENE_RX_CARRIER_VALID;
+
+	if (!period)
+		return 0;
+
+	carrier = 2000000 / period;
+	ene_dbg("RX: sensed carrier = %d Hz", carrier);
+	return carrier;
+}
+
+/* determine which input to use*/
+static void ene_rx_set_inputs(struct ene_device *dev)
+{
+	int learning_mode = dev->learning_enabled || dev->rx_carrier_sense;
+
+	ene_dbg("RX: setup reciever, learning mode = %d", learning_mode);
+
+	ene_enable_normal_recieve(dev, 1);
+
+	/* old hardware doesn't support learning mode for sure */
+	if (dev->hw_revision <= ENE_HW_B)
+		return;
+
+	/* reciever not learning capable, still set gpio40 correctly */
+	if (!dev->hw_learning_and_tx_capable) {
+		ene_enable_gpio40_recieve(dev, !dev->hw_gpio40_learning);
+		return;
+	}
+
+	/* enable learning mode */
+	if (learning_mode) {
+		ene_enable_gpio40_recieve(dev, dev->hw_gpio40_learning);
+
+		/* fan input is not used for learning */
+		if (dev->hw_fan_as_normal_input)
+			ene_enable_fan_recieve(dev, 0);
+
+	/* disable learning mode */
+	} else {
+		if (dev->hw_fan_as_normal_input) {
+			ene_enable_fan_recieve(dev, 1);
+			ene_enable_normal_recieve(dev, 0);
+		} else
+			ene_enable_gpio40_recieve(dev,
+					!dev->hw_gpio40_learning);
+	}
+
+	/* set few additional settings for this mode */
+	ene_hw_write_reg_mask(dev, ENE_CIR_CONF1, learning_mode ?
+			      ENE_CIR_CONF1_LEARN1 : 0, ENE_CIR_CONF1_LEARN1);
+
+	ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, learning_mode ?
+			      ENE_CIR_CONF2_LEARN2 : 0, ENE_CIR_CONF2_LEARN2);
+}
+
+/* Enable the device for receive */
+static void ene_rx_enable(struct ene_device *dev)
+{
+	u8 reg_value;
+
+	if (dev->hw_revision < ENE_HW_C) {
+		ene_hw_write_reg(dev, ENEB_IRQ, dev->irq << 1);
+		ene_hw_write_reg(dev, ENEB_IRQ_UNK1, 0x01);
+	} else {
+		reg_value = ene_hw_read_reg(dev, ENEC_IRQ) & 0xF0;
+		reg_value |= ENEC_IRQ_UNK_EN;
+		reg_value &= ~ENEC_IRQ_STATUS;
+		reg_value |= (dev->irq & ENEC_IRQ_MASK);
+		ene_hw_write_reg(dev, ENEC_IRQ, reg_value);
+		ene_hw_write_reg(dev, ENE_TX_UNK1, 0x63);
+	}
+
+	ene_hw_write_reg(dev, ENE_CIR_CONF2, 0x00);
+	ene_rx_set_inputs(dev);
+
+	/* set sampling period */
+	ene_hw_write_reg(dev, ENE_CIR_SAMPLE_PERIOD, sample_period);
+
+	/* ack any pending irqs - just in case */
+	ene_irq_status(dev);
+
+	/* enter idle mode */
+	ene_rx_set_idle(dev, 1);
+
+	/* enable firmware bits */
+	ene_hw_write_reg_mask(dev, ENE_FW1,
+			      ENE_FW1_ENABLE | ENE_FW1_IRQ,
+			      ENE_FW1_ENABLE | ENE_FW1_IRQ);
+}
+
+/* Disable the device reciever */
+static void ene_rx_disable(struct ene_device *dev)
+{
+	/* disable inputs */
+	ene_enable_normal_recieve(dev, 0);
+
+	if (dev->hw_fan_as_normal_input)
+		ene_enable_fan_recieve(dev, 0);
+
+	/* disable hardware IRQ and firmware flag */
+	ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_ENABLE | ENE_FW1_IRQ);
+
+	ene_rx_set_idle(dev, 1);
+}
+
+/*  send current sample to the user */
+static void ene_rx_flush(struct ene_device *dev, int timeout)
+{
+	unsigned long value;
+
+	value =	dev->rx_sample_pulse ? LIRC_PULSE(dev->rx_sample) :
+					LIRC_SPACE(dev->rx_sample);
+	ene_send_sample(dev, value);
+	dev->rx_sample = 0;
+	dev->rx_sample_pulse = 0;
+}
+
+/* recieve new sample and process it */
+static void ene_rx_sample(struct ene_device *dev, int sample, int is_pulse)
+{
+	ene_dbg("RX: sample %8d (%s)", sample, is_pulse ? "pulse" : "space");
+
+	/* ignore spaces in idle mode, can get them on revC */
+	/* also ignore a space in front of first pulse */
+	if (dev->rx_idle && !is_pulse)
+		return;
+
+	/* get out of idle mode now */
+	if (dev->rx_idle)
+		ene_rx_set_idle(dev, 0);
+
+	if (!dev->rx_sample) {
+		dev->rx_sample = sample;
+		dev->rx_sample_pulse = is_pulse;
+	} else if (is_pulse == dev->rx_sample_pulse)
+		dev->rx_sample += sample;
+	else {
+		ene_rx_flush(dev, 0);
+		dev->rx_sample = sample;
+		dev->rx_sample_pulse = is_pulse;
+	}
+
+	if (is_pulse)
+		return;
+
+	/* overflow sample from fan input recieved, enable idle mode */
+	if (dev->rx_fan_input_inuse &&
+		sample == ENE_FAN_VALUE_MASK * ENE_SAMPLE_PERIOD_FAN) {
+		ene_rx_set_idle(dev, 1);
+		return;
+	}
+
+	if (!dev->rx_fan_input_inuse) {
+		/* Report timeout if enabled */
+		if (dev->rx_timeout && dev->rx_send_timeout_packet &&
+			!dev->rx_timeout_sent &&
+				dev->rx_sample > dev->rx_timeout) {
+			ene_dbg("RX: sending timeout sample");
+			ene_send_sample(dev, LIRC_TIMEOUT(dev->rx_sample));
+			dev->rx_timeout_sent = 1;
+		}
+
+		/* too large sample accumulated via normal input.
+		note that on revC, hardware idle mode turns on automaticly,
+			so max gap should be less that the gap after which
+			hw stops sending samples */
+		if (dev->rx_sample > ENE_MAXGAP) {
+			ene_rx_set_idle(dev, 1);
+			return;
+		}
+	}
+}
+
+/* enable or disable idle mode */
+static void ene_rx_set_idle(struct ene_device *dev, int idle)
+{
+	struct timeval now;
+	int disable_sampler = 0;
+
+
+	/* Also put hardware sampler in 'idle' mode on revB*/
+	/* revC and higher do that automaticly (firmware does?) */
+	if ((dev->hw_revision < ENE_HW_C) && enable_idle)
+		if (idle)
+			disable_sampler = 1;
+
+	ene_hw_write_reg_mask(dev, ENE_CIR_SAMPLE_PERIOD,
+			      disable_sampler ? 0 : ENE_CIR_SAMPLE_OVERFLOW,
+			      ENE_CIR_SAMPLE_OVERFLOW);
+	dev->rx_idle = idle;
+
+	/* remember when we have entered the idle mode */
+	if (idle) {
+		ene_dbg("RX: going into idle mode");
+		do_gettimeofday(&dev->rx_gap_start);
+		return;
+	}
+
+	ene_dbg("RX: back from idle mode");
+
+	/* send the gap between keypresses now */
+	do_gettimeofday(&now);
+
+	if (dev->rx_sample_pulse) {
+		ene_dbg("RX: somehow we recieved a pulse before idle mode???");
+		return;
+	}
+
+	/* manually calculate and recieve the gap between keypresses */
+	if (now.tv_sec - dev->rx_gap_start.tv_sec > 16)
+		dev->rx_sample = LIRC_SPACE(LIRC_VALUE_MASK);
+	else
+		dev->rx_sample +=
+		    1000000ull * (now.tv_sec - dev->rx_gap_start.tv_sec)
+		    + now.tv_usec - dev->rx_gap_start.tv_usec;
+
+	if (dev->rx_sample > LIRC_SPACE(LIRC_VALUE_MASK))
+		dev->rx_sample = LIRC_SPACE(LIRC_VALUE_MASK);
+
+	ene_rx_flush(dev, 0);
+	dev->rx_timeout_sent = 0;
+}
+
+/* prepare transmission */
+static void ene_tx_prepare(struct ene_device *dev)
+{
+	u8 conf1;
+
+	conf1 = ene_hw_read_reg(dev, ENE_CIR_CONF1);
+	dev->saved_conf1 = conf1;
+
+	if (dev->hw_revision == ENE_HW_C)
+		conf1 &= ~ENE_CIR_CONF1_TX_CLEAR;
+
+	/* Enable TX engine */
+	conf1 |= ENE_CIR_CONF1_TX_ON;
+
+	/* Set carrier */
+	if (dev->tx_period) {
+
+		int tx_period_in500ns = dev->tx_period * 2;
+
+		int tx_pulse_width_in_500ns =
+			tx_period_in500ns / (100 / dev->tx_duty_cycle);
+
+		if (!tx_pulse_width_in_500ns)
+			tx_pulse_width_in_500ns = 1;
+
+		ene_dbg("TX: pulse distance = %d * 500 ns", tx_period_in500ns);
+		ene_dbg("TX: pulse width = %d * 500 ns",
+						tx_pulse_width_in_500ns);
+
+		ene_hw_write_reg(dev, ENE_TX_PERIOD, ENE_TX_PERIOD_UNKBIT |
+					tx_period_in500ns);
+
+		ene_hw_write_reg(dev, ENE_TX_PERIOD_PULSE,
+					tx_pulse_width_in_500ns);
+
+		conf1 |= ENE_CIR_CONF1_TX_CARR;
+	} else
+		conf1 &= ~ENE_CIR_CONF1_TX_CARR;
+
+	ene_hw_write_reg(dev, ENE_CIR_CONF1, conf1);
+	dev->tx_underway = 1;
+
+}
+
+/* end transmission */
+static void ene_tx_complete(struct ene_device *dev)
+{
+	ene_hw_write_reg(dev, ENE_CIR_CONF1, dev->saved_conf1);
+	dev->tx_underway = 0;
+}
+
+/* set transmit mask */
+static void ene_tx_set_transmiter_mask(struct ene_device *dev)
+{
+	u8 txport1 = ene_hw_read_reg(dev, ENE_TX_PORT1) & ~ENE_TX_PORT1_EN;
+	u8 txport2 = ene_hw_read_reg(dev, ENE_TX_PORT2) & ~ENE_TX_PORT2_EN;
+
+	if (dev->transmitter_mask & 0x01)
+		txport1 |= ENE_TX_PORT1_EN;
+
+	if (dev->transmitter_mask & 0x02)
+		txport2 |= ENE_TX_PORT2_EN;
+
+	ene_hw_write_reg(dev, ENE_TX_PORT1, txport1);
+	ene_hw_write_reg(dev, ENE_TX_PORT2, txport2);
+}
+
+/* TX one sample - must be called with dev->hw_lock*/
+static void ene_tx_sample(struct ene_device *dev)
+{
+	u8 raw_tx;
+	u32 sample;
+
+	if (!dev->tx_underway) {
+		ene_dbg("TX: attempt to transmit while hw isn't setup");
+		return;
+	}
+
+	/* Grab next TX sample */
+	if (!dev->tx_sample) {
+again:
+		if (dev->tx_pos == dev->tx_len + 1) {
+			if (!dev->tx_done) {
+				ene_dbg("TX: no more data to send");
+				dev->tx_done = 1;
+				goto exit;
+			} else {
+				ene_dbg("TX: last sample sent by hardware");
+				ene_tx_complete(dev);
+				complete(&dev->tx_complete);
+				return;
+			}
+		}
+
+		sample = dev->tx_buffer[dev->tx_pos++];
+		dev->tx_sample_pulse = !dev->tx_sample_pulse;
+
+		ene_dbg("TX: sample %8d (%s)", sample, dev->tx_sample_pulse ?
+							"pulse" : "space");
+
+		dev->tx_sample = DIV_ROUND_CLOSEST(sample, ENE_TX_SMPL_PERIOD);
+
+		/* guard against too short samples */
+		if (!dev->tx_sample)
+			goto again;
+	}
+
+	raw_tx = min(dev->tx_sample , (unsigned int)ENE_TX_SMLP_MASK);
+	dev->tx_sample -= raw_tx;
+
+	if (dev->tx_sample_pulse)
+		raw_tx |= ENE_TX_PULSE_MASK;
+
+	ene_hw_write_reg(dev, ENE_TX_INPUT1 + dev->tx_reg, raw_tx);
+	dev->tx_reg = !dev->tx_reg;
+exit:
+	/* simulate TX done interrupt */
+	if (txsim)
+		mod_timer(&dev->tx_sim_timer, jiffies + HZ / 500);
+}
+
+/* timer to simulate tx done interrupt */
+static void ene_tx_irqsim(unsigned long data)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+	ene_tx_sample(dev);
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+}
+
+
+/* read irq status and ack it */
+static int ene_irq_status(struct ene_device *dev)
+{
+	u8 irq_status;
+	u8 fw_flags1, fw_flags2;
+	int cur_rx_pointer;
+	int retval = 0;
+
+	fw_flags2 = ene_hw_read_reg(dev, ENE_FW2);
+	cur_rx_pointer = !!(fw_flags2 & ENE_FW2_BUF_HIGH);
+
+	if (dev->hw_revision < ENE_HW_C) {
+		irq_status = ene_hw_read_reg(dev, ENEB_IRQ_STATUS);
+
+		if (!(irq_status & ENEB_IRQ_STATUS_IR))
+			return 0;
+
+		ene_hw_write_reg(dev, ENEB_IRQ_STATUS,
+				 irq_status & ~ENEB_IRQ_STATUS_IR);
+		dev->rx_pointer = cur_rx_pointer;
+		return ENE_IRQ_RX;
+	}
+
+	irq_status = ene_hw_read_reg(dev, ENEC_IRQ);
+
+	if (!(irq_status & ENEC_IRQ_STATUS))
+		return 0;
+
+	/* original driver does that twice - a workaround ? */
+	ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
+	ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
+
+	/* clear unknown flag in F8F9 */
+	if (fw_flags2 & ENE_FW2_IRQ_CLR)
+		ene_hw_write_reg(dev, ENE_FW2, fw_flags2 & ~ENE_FW2_IRQ_CLR);
+
+	/* check if this is a TX interrupt */
+	fw_flags1 = ene_hw_read_reg(dev, ENE_FW1);
+	if (fw_flags1 & ENE_FW1_TXIRQ) {
+		ene_hw_write_reg(dev, ENE_FW1, fw_flags1 & ~ENE_FW1_TXIRQ);
+		retval |= ENE_IRQ_TX;
+	}
+
+	/* Check if this is RX interrupt */
+	if (dev->rx_pointer != cur_rx_pointer) {
+		retval |= ENE_IRQ_RX;
+		dev->rx_pointer = cur_rx_pointer;
+
+	} else if (!(retval & ENE_IRQ_TX)) {
+		ene_dbg("RX: interrupt without change in RX pointer(%d)",
+			dev->rx_pointer);
+		retval |= ENE_IRQ_RX;
+	}
+
+	if ((retval & ENE_IRQ_RX) && (retval & ENE_IRQ_TX))
+		ene_dbg("both RX and TX interrupt at same time");
+
+	return retval;
+}
+
+/* interrupt handler */
+static irqreturn_t ene_isr(int irq, void *data)
+{
+	u16 hw_value;
+	int i, hw_sample;
+	int pulse;
+	int irq_status;
+	unsigned long flags;
+	int carrier = 0;
+	irqreturn_t retval = IRQ_NONE;
+	struct ene_device *dev = (struct ene_device *)data;
+
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+	irq_status = ene_irq_status(dev);
+
+	if (!irq_status)
+		goto unlock;
+
+	retval = IRQ_HANDLED;
+
+	if (irq_status & ENE_IRQ_TX) {
+
+		if (!dev->hw_learning_and_tx_capable) {
+			ene_dbg("TX interrupt on unsupported device!");
+			goto unlock;
+		}
+		ene_tx_sample(dev);
+	}
+
+	if (!(irq_status & ENE_IRQ_RX))
+		goto unlock;
+
+
+	if ((debug && dev->learning_enabled) || dev->rx_carrier_sense)
+		carrier = ene_rx_sense_carrier(dev);
+
+	if (dev->rx_carrier_sense && carrier)
+		ene_send_sample(dev, LIRC_FREQUENCY(carrier));
+
+
+	for (i = 0; i < ENE_SAMPLES_SIZE; i++) {
+		hw_value = ene_hw_read_reg(dev,
+				ENE_SAMPLE_BUFFER + dev->rx_pointer * 4 + i);
+
+		if (dev->rx_fan_input_inuse) {
+			/* read high part of the sample */
+			hw_value |= ene_hw_read_reg(dev,
+			    ENE_SAMPLE_BUFFER_FAN +
+					dev->rx_pointer * 4 + i) << 8;
+			pulse = hw_value & ENE_FAN_SMPL_PULS_MSK;
+
+			/* clear space bit, and other unused bits */
+			hw_value &= ENE_FAN_VALUE_MASK;
+			hw_sample = hw_value * ENE_SAMPLE_PERIOD_FAN;
+
+		} else {
+			pulse = !(hw_value & ENE_SAMPLE_SPC_MASK);
+			hw_value &= ENE_SAMPLE_VALUE_MASK;
+			hw_sample = hw_value * sample_period;
+		}
+		/* no more data */
+		if (!(hw_value))
+			break;
+
+		ene_rx_sample(dev, hw_sample, pulse);
+	}
+unlock:
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+	return retval;
+}
+
+/* Initialize default settings */
+static void ene_setup_settings(struct ene_device *dev)
+{
+	dev->rx_send_timeout_packet = 0;
+	dev->rx_timeout = ENE_MAXGAP;
+	dev->tx_period = 32;
+	dev->tx_duty_cycle = 25; /*%*/
+	dev->transmitter_mask = 3;
+
+	/* Force learning mode if (input == 2), otherwise
+		let user set it with LIRC_SET_REC_CARRIER */
+	dev->learning_enabled =
+		(input == 2 && dev->hw_learning_and_tx_capable);
+
+	/* Clear accumulated sample bufer */
+	dev->rx_sample = 0;
+	dev->rx_sample_pulse = 0;
+	dev->rx_pointer = -1;
+	dev->rx_carrier_sense = 0;
+
+}
+
+/* outside interface: called on first open*/
+static int ene_open(void *data)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+	dev->in_use = 1;
+	ene_setup_settings(dev);
+	ene_rx_enable(dev);
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+	return 0;
+}
+
+/* outside interface: called on device close*/
+static void ene_close(void *data)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	unsigned long flags;
+	spin_lock_irqsave(&dev->hw_lock, flags);
+
+	ene_rx_disable(dev);
+	dev->in_use = 0;
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+}
+
+/* outside interface for settings */
+static int ene_ioctl(struct inode *node, struct file *file,
+		      unsigned int cmd, unsigned long arg)
+{
+	int lvalue = 0, retval, tmp;
+	unsigned long flags;
+	struct ene_device *dev = lirc_get_pdata(file);
+
+
+	switch (cmd) {
+	case LIRC_SET_SEND_CARRIER:
+	case LIRC_SET_SEND_DUTY_CYCLE:
+	case LIRC_SET_TRANSMITTER_MASK:
+	case LIRC_SET_MEASURE_CARRIER_MODE:
+	case LIRC_SET_REC_CARRIER:
+		/* All these aren't possible without this */
+		if (!dev->hw_learning_and_tx_capable)
+			return -ENOSYS;
+		/* Fall through */
+	case LIRC_SET_REC_TIMEOUT:
+	case LIRC_SET_REC_TIMEOUT_REPORTS:
+		retval = get_user(lvalue, (unsigned int *) arg);
+		if (retval)
+			return retval;
+	}
+
+	switch (cmd) {
+	case LIRC_SET_SEND_CARRIER:
+		ene_dbg("TX: attempt to set tx carrier to %d kHz", lvalue);
+		tmp = 1000000 / lvalue; /* (1 / freq) (* # usec in 1 sec) */
+
+		if (tmp && (tmp > ENE_TX_PERIOD_MAX ||
+				tmp < ENE_TX_PERIOD_MIN)) {
+
+			ene_dbg("TX: out of range %d-%d carrier, "
+				"falling back to 32 kHz",
+				1000 / ENE_TX_PERIOD_MIN,
+				1000 / ENE_TX_PERIOD_MAX);
+
+			tmp = 32; /* this is just a coincidence!!! */
+		}
+		ene_dbg("TX: set carrier to %d kHz", lvalue);
+
+		spin_lock_irqsave(&dev->hw_lock, flags);
+		dev->tx_period = tmp;
+		spin_unlock_irqrestore(&dev->hw_lock, flags);
+		break;
+	case LIRC_SET_SEND_DUTY_CYCLE:
+		ene_dbg("TX: attempt to set duty cycle to %d%%", lvalue);
+
+		if ((lvalue >= 100) || (lvalue <= 0)) {
+			retval = -EINVAL;
+			break;
+		}
+		spin_lock_irqsave(&dev->hw_lock, flags);
+		dev->tx_duty_cycle = lvalue;
+		spin_unlock_irqrestore(&dev->hw_lock, flags);
+		break;
+	case LIRC_SET_TRANSMITTER_MASK:
+		ene_dbg("TX: attempt to set transmitter mask %02x", lvalue);
+
+		/* invalid txmask */
+		if (!lvalue || lvalue & ~0x3) {
+			ene_dbg("TX: invalid mask");
+			/* this supposed to return num of transmitters */
+			retval =  2;
+			break;
+		}
+		spin_lock_irqsave(&dev->hw_lock, flags);
+		dev->transmitter_mask = lvalue;
+		spin_unlock_irqrestore(&dev->hw_lock, flags);
+		break;
+	case LIRC_SET_REC_CARRIER:
+		tmp = (lvalue > ENE_NORMAL_RX_HI || lvalue < ENE_NORMAL_RX_LOW);
+
+		if (tmp != dev->learning_enabled) {
+			spin_lock_irqsave(&dev->hw_lock, flags);
+			dev->learning_enabled = tmp;
+			ene_rx_set_inputs(dev);
+			spin_unlock_irqrestore(&dev->hw_lock, flags);
+		}
+		break;
+	case LIRC_SET_REC_TIMEOUT:
+		spin_lock_irqsave(&dev->hw_lock, flags);
+		dev->rx_timeout = lvalue;
+		spin_unlock_irqrestore(&dev->hw_lock, flags);
+		ene_dbg("RX: set rx report timeout to %d", dev->rx_timeout);
+		break;
+	case LIRC_SET_REC_TIMEOUT_REPORTS:
+		spin_lock_irqsave(&dev->hw_lock, flags);
+		dev->rx_send_timeout_packet = lvalue;
+		spin_unlock_irqrestore(&dev->hw_lock, flags);
+		ene_dbg("RX: %sable timeout reports",
+				dev->rx_send_timeout_packet ? "en" : "dis");
+		break;
+	case LIRC_SET_MEASURE_CARRIER_MODE:
+		if (dev->rx_carrier_sense == lvalue)
+			break;
+		spin_lock_irqsave(&dev->hw_lock, flags);
+		dev->rx_carrier_sense = lvalue;
+		ene_rx_set_inputs(dev);
+		spin_unlock_irqrestore(&dev->hw_lock, flags);
+		break;
+	case LIRC_GET_REC_RESOLUTION:
+		tmp = dev->rx_fan_input_inuse ?
+			ENE_SAMPLE_PERIOD_FAN : sample_period;
+		retval = put_user(tmp, (unsigned long *) arg);
+		break;
+	default:
+		retval = -ENOIOCTLCMD;
+		break;
+	}
+
+	return retval;
+}
+
+/* outside interface: transmit */
+static ssize_t ene_transmit(struct file *file, const char *buf,
+				  size_t n, loff_t *ppos)
+{
+	struct ene_device *dev = lirc_get_pdata(file);
+	unsigned long flags;
+
+	if (!dev)
+		return -EFAULT;
+
+	if (!dev->hw_learning_and_tx_capable)
+		return -ENODEV;
+
+	if (n % sizeof(int))
+		return -EINVAL;
+
+	if (n > ENE_TXBUF_SIZE * sizeof(int))
+		return -ENOMEM;
+
+	if (copy_from_user(dev->tx_buffer, buf, n))
+		return -EFAULT;
+
+	dev->tx_len = n / sizeof(int);
+	dev->tx_pos = 0;
+	dev->tx_reg = 0;
+	dev->tx_done = 0;
+	dev->tx_sample = 0;
+	dev->tx_sample_pulse = 0;
+
+	ene_dbg("TX: %d samples", dev->tx_len);
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+
+	ene_tx_set_transmiter_mask(dev);
+	ene_tx_prepare(dev);
+
+	/* Transmit first two samples */
+	ene_tx_sample(dev);
+	ene_tx_sample(dev);
+
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+
+	if (wait_for_completion_timeout(&dev->tx_complete, 2 * HZ) == 0) {
+		ene_dbg("TX: timeout");
+		spin_lock_irqsave(&dev->hw_lock, flags);
+		ene_tx_complete(dev);
+		spin_unlock_irqrestore(&dev->hw_lock, flags);
+	} else
+		ene_dbg("TX: done");
+
+	return n;
+}
+
+/* Sends one sample to the user */
+static void ene_send_sample(struct ene_device *dev, unsigned long sample)
+{
+	if (!lirc_buffer_full(dev->lirc_driver->rbuf)) {
+		lirc_buffer_write(dev->lirc_driver->rbuf, (void *)&sample);
+		wake_up(&dev->lirc_driver->rbuf->wait_poll);
+	}
+}
+
+
+static const struct file_operations ene_fops = {
+	.owner		= THIS_MODULE,
+	.write		= ene_transmit,
+	.ioctl		= ene_ioctl,
+};
+
+/* main load function */
+static int ene_probe(struct pnp_dev *pnp_dev,
+		     const struct pnp_device_id *dev_id)
+{
+	struct ene_device *dev;
+	struct lirc_driver *lirc_driver;
+	int error = -ENOMEM;
+
+	dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL);
+
+	if (!dev)
+		goto err1;
+
+	dev->pnp_dev = pnp_dev;
+	pnp_set_drvdata(pnp_dev, dev);
+
+	/* prepare lirc interface */
+	error = -ENOMEM;
+	lirc_driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
+
+	if (!lirc_driver)
+		goto err2;
+
+	dev->lirc_driver = lirc_driver;
+
+	strcpy(lirc_driver->name, ENE_DRIVER_NAME);
+	lirc_driver->minor = -1;
+	lirc_driver->code_length = sizeof(int) * 8;
+	lirc_driver->features = LIRC_CAN_REC_MODE2 |
+				LIRC_CAN_GET_REC_RESOLUTION |
+				LIRC_CAN_SET_REC_TIMEOUT;
+	lirc_driver->data = dev;
+	lirc_driver->set_use_inc = ene_open;
+	lirc_driver->set_use_dec = ene_close;
+	lirc_driver->dev = &pnp_dev->dev;
+	lirc_driver->owner = THIS_MODULE;
+	lirc_driver->fops = &ene_fops;
+	lirc_driver->min_timeout = ENE_MINGAP;
+	lirc_driver->max_timeout = ENE_MAXGAP;
+	lirc_driver->rbuf = kzalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
+
+	if (!lirc_driver->rbuf)
+		goto err3;
+
+	if (lirc_buffer_init(lirc_driver->rbuf, sizeof(int), sizeof(int) * 512))
+		goto err4;
+
+	/* validate resources */
+	if (!pnp_port_valid(pnp_dev, 0) ||
+	    pnp_port_len(pnp_dev, 0) < ENE_MAX_IO)
+		goto err5;
+
+	if (!pnp_irq_valid(pnp_dev, 0))
+		goto err5;
+
+	dev->hw_io = pnp_port_start(pnp_dev, 0);
+	dev->irq = pnp_irq(pnp_dev, 0);
+	spin_lock_init(&dev->hw_lock);
+
+	/* claim the resources */
+	error = -EBUSY;
+	if (!request_region(dev->hw_io, ENE_MAX_IO, ENE_DRIVER_NAME))
+		goto err5;
+
+	if (request_irq(dev->irq, ene_isr,
+			IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev))
+		goto err6;
+
+	/* detect hardware version and features */
+	error = ene_hw_detect(dev);
+	if (error)
+		goto err7;
+
+	ene_setup_settings(dev);
+
+	if (!dev->hw_learning_and_tx_capable && txsim) {
+		dev->hw_learning_and_tx_capable = 1;
+		setup_timer(&dev->tx_sim_timer, ene_tx_irqsim,
+						(long unsigned int)dev);
+		ene_printk(KERN_WARNING,
+			"Simulation of TX activated\n");
+	}
+
+	if (dev->hw_learning_and_tx_capable) {
+		lirc_driver->features |= LIRC_CAN_SEND_PULSE |
+					 LIRC_CAN_SET_SEND_CARRIER |
+					 LIRC_CAN_SET_TRANSMITTER_MASK;
+
+		if (enable_duty_carrier)
+			lirc_driver->features |= LIRC_CAN_SET_SEND_DUTY_CYCLE;
+
+		if (input == 0)
+			lirc_driver->features |= LIRC_CAN_SET_REC_CARRIER;
+
+		init_completion(&dev->tx_complete);
+	}
+
+	/* don't allow too short/long sample periods */
+	if (sample_period < 5 || sample_period > 0x7F)
+		sample_period = -1;
+
+	/* choose default sample period */
+	if (sample_period == -1) {
+
+		sample_period = 50;
+
+		/* on revB, hardware idle mode eats first sample
+		  if we set too low sample period */
+		if (dev->hw_revision == ENE_HW_B && enable_idle)
+			sample_period = 75;
+	}
+
+	device_set_wakeup_capable(&pnp_dev->dev, 1);
+	device_set_wakeup_enable(&pnp_dev->dev, 1);
+
+	error = -ENODEV;
+	if (lirc_register_driver(lirc_driver))
+		goto err7;
+
+	ene_printk(KERN_NOTICE, "driver has been succesfully loaded\n");
+	return 0;
+
+err7:
+	free_irq(dev->irq, dev);
+err6:
+	release_region(dev->hw_io, ENE_MAX_IO);
+err5:
+	lirc_buffer_free(lirc_driver->rbuf);
+err4:
+	kfree(lirc_driver->rbuf);
+err3:
+	kfree(lirc_driver);
+err2:
+	kfree(dev);
+err1:
+	return error;
+}
+
+/* main unload function */
+static void ene_remove(struct pnp_dev *pnp_dev)
+{
+	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+	ene_rx_disable(dev);
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+
+	free_irq(dev->irq, dev);
+	release_region(dev->hw_io, ENE_MAX_IO);
+	lirc_unregister_driver(dev->lirc_driver->minor);
+	lirc_buffer_free(dev->lirc_driver->rbuf);
+	kfree(dev->lirc_driver);
+	kfree(dev);
+}
+
+/* enable wake on IR (wakes on specific button on original remote) */
+static void ene_enable_wake(struct ene_device *dev, int enable)
+{
+	enable = enable && device_may_wakeup(&dev->pnp_dev->dev);
+
+	ene_dbg("wake on IR %s", enable ? "enabled" : "disabled");
+
+	ene_hw_write_reg_mask(dev, ENE_FW1, enable ?
+		ENE_FW1_WAKE : 0, ENE_FW1_WAKE);
+}
+
+#ifdef CONFIG_PM
+static int ene_suspend(struct pnp_dev *pnp_dev, pm_message_t state)
+{
+	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+	ene_enable_wake(dev, 1);
+	return 0;
+}
+
+static int ene_resume(struct pnp_dev *pnp_dev)
+{
+	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+	if (dev->in_use)
+		ene_rx_enable(dev);
+
+	ene_enable_wake(dev, 0);
+	return 0;
+}
+#endif
+
+static void ene_shutdown(struct pnp_dev *pnp_dev)
+{
+	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+	ene_enable_wake(dev, 1);
+}
+
+static const struct pnp_device_id ene_ids[] = {
+	{.id = "ENE0100",},
+	{.id = "ENE0200",},
+	{.id = "ENE0201",},
+	{},
+};
+
+static struct pnp_driver ene_driver = {
+	.name = ENE_DRIVER_NAME,
+	.id_table = ene_ids,
+	.flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
+
+	.probe = ene_probe,
+	.remove = __devexit_p(ene_remove),
+#ifdef CONFIG_PM
+	.suspend = ene_suspend,
+	.resume = ene_resume,
+#endif
+	.shutdown = ene_shutdown,
+};
+
+static int __init ene_init(void)
+{
+	return pnp_register_driver(&ene_driver);
+}
+
+static void ene_exit(void)
+{
+	pnp_unregister_driver(&ene_driver);
+}
+
+module_param(sample_period, int, S_IRUGO);
+MODULE_PARM_DESC(sample_period, "Hardware sample period (50 us default)");
+
+module_param(enable_idle, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(enable_idle,
+	"Enables turning off signal sampling after long inactivity time; "
+	"if disabled might help detecting input signal (default: enabled)"
+	" (KB3926B only)");
+
+module_param(input, bool, S_IRUGO);
+MODULE_PARM_DESC(input, "select which input to use "
+	"0 - auto, 1 - standard, 2 - wideband(KB3926C+)");
+
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debug (debug=2 verbose debug output)");
+
+module_param(txsim, bool, S_IRUGO);
+MODULE_PARM_DESC(txsim,
+	"Simulate TX features on unsupported hardware (dangerous)");
+
+module_param(enable_duty_carrier, bool, S_IRUGO);
+MODULE_PARM_DESC(enable_duty_carrier,
+	"Enable a code that might allow to to set TX carrier duty cycle");
+
+MODULE_DEVICE_TABLE(pnp, ene_ids);
+MODULE_DESCRIPTION
+	("LIRC driver for KB3926B/KB3926C/KB3926D "
+	"(aka ENE0100/ENE0200/ENE0201) CIR port");
+
+MODULE_AUTHOR("Maxim Levitsky");
+MODULE_LICENSE("GPL");
+
+module_init(ene_init);
+module_exit(ene_exit);
diff --git a/drivers/media/IR/ene_ir.h b/drivers/media/IR/ene_ir.h
new file mode 100644
index 0000000..06453a8
--- /dev/null
+++ b/drivers/media/IR/ene_ir.h
@@ -0,0 +1,240 @@
+/*
+ * driver for ENE KB3926 B/C/D CIR (also known as ENE0100/ENE0200/ENE0201)
+ *
+ * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+#include <linux/spinlock.h>
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+/* hardware address */
+#define ENE_STATUS		0	/* hardware status - unused */
+#define ENE_ADDR_HI		1	/* hi byte of register address */
+#define ENE_ADDR_LO		2	/* low byte of register address */
+#define ENE_IO			3	/* read/write window */
+#define ENE_MAX_IO		4
+
+/* 8 bytes of samples, divided in 2 halfs*/
+#define ENE_SAMPLE_BUFFER	0xF8F0	/* regular sample buffer */
+#define ENE_SAMPLE_SPC_MASK	0x80	/* sample is space */
+#define ENE_SAMPLE_VALUE_MASK	0x7F
+#define ENE_SAMPLE_OVERFLOW	0x7F
+#define ENE_SAMPLES_SIZE	4
+
+/* fan input sample buffer */
+#define ENE_SAMPLE_BUFFER_FAN	0xF8FB	/* this buffer holds high byte of */
+					/* each sample of normal buffer */
+#define ENE_FAN_SMPL_PULS_MSK	0x8000	/* this bit of combined sample */
+					/* if set, says that sample is pulse */
+#define ENE_FAN_VALUE_MASK	0x0FFF  /* mask for valid bits of the value */
+
+/* first firmware register */
+#define ENE_FW1			0xF8F8
+#define	ENE_FW1_ENABLE		0x01	/* enable fw processing */
+#define ENE_FW1_TXIRQ		0x02	/* TX interrupt pending */
+#define ENE_FW1_WAKE		0x40	/* enable wake from S3 */
+#define ENE_FW1_IRQ		0x80	/* enable interrupt */
+
+/* second firmware register */
+#define ENE_FW2			0xF8F9
+#define ENE_FW2_BUF_HIGH	0x01	/* which half of the buffer to read */
+#define ENE_FW2_IRQ_CLR		0x04	/* clear this on IRQ */
+#define ENE_FW2_GP40_AS_LEARN	0x08	/* normal input is used as */
+					/* learning input */
+#define ENE_FW2_FAN_AS_NRML_IN	0x40	/* fan is used as normal input */
+#define ENE_FW2_LEARNING	0x80	/* hardware supports learning and TX */
+
+/* transmitter ports */
+#define ENE_TX_PORT2		0xFC01	/* this enables one or both */
+#define ENE_TX_PORT2_EN		0x20	/* TX ports */
+#define ENE_TX_PORT1		0xFC08	
+#define ENE_TX_PORT1_EN		0x02
+
+/* IRQ registers block (for revision B) */
+#define ENEB_IRQ		0xFD09	/* IRQ number */
+#define ENEB_IRQ_UNK1		0xFD17	/* unknown setting = 1 */
+#define ENEB_IRQ_STATUS		0xFD80	/* irq status */
+#define ENEB_IRQ_STATUS_IR	0x20	/* IR irq */
+
+/* fan as input settings - only if learning capable */
+#define ENE_FAN_AS_IN1		0xFE30  /* fan init reg 1 */
+#define ENE_FAN_AS_IN1_EN	0xCD
+#define ENE_FAN_AS_IN2		0xFE31  /* fan init reg 2 */
+#define ENE_FAN_AS_IN2_EN	0x03
+#define ENE_SAMPLE_PERIOD_FAN   61	/* fan input has fixed sample period */
+
+/* IRQ registers block (for revision C,D) */
+#define ENEC_IRQ		0xFE9B	/* new irq settings register */
+#define ENEC_IRQ_MASK		0x0F	/* irq number mask */
+#define ENEC_IRQ_UNK_EN		0x10	/* always enabled */
+#define ENEC_IRQ_STATUS		0x20	/* irq status and ACK */
+
+/* CIR block settings */
+#define ENE_CIR_CONF1		0xFEC0
+#define ENE_CIR_CONF1_TX_CLEAR	0x01	/* clear that on revC */
+					/* while transmitting */
+#define ENE_CIR_CONF1_RX_ON	0x07	/* normal reciever enabled */
+#define ENE_CIR_CONF1_LEARN1	0x08	/* enabled on learning mode */
+#define ENE_CIR_CONF1_TX_ON	0x30	/* enabled on transmit */
+#define ENE_CIR_CONF1_TX_CARR	0x80	/* send TX carrier or not */
+
+#define ENE_CIR_CONF2		0xFEC1	/* unknown setting = 0 */
+#define ENE_CIR_CONF2_LEARN2	0x10	/* set on enable learning */
+#define ENE_CIR_CONF2_GPIO40DIS	0x20	/* disable input via gpio40 */
+
+#define ENE_CIR_SAMPLE_PERIOD	0xFEC8	/* sample period in us */
+#define ENE_CIR_SAMPLE_OVERFLOW	0x80	/* interrupt on overflows if set */
+
+
+/* Two byte tx buffer */
+#define ENE_TX_INPUT1		0xFEC9
+#define ENE_TX_INPUT2		0xFECA
+#define ENE_TX_PULSE_MASK	0x80	/* Transmitted sample is pulse */
+#define ENE_TX_SMLP_MASK	0x7F
+#define ENE_TX_SMPL_PERIOD	50	/* transmit sample period - fixed */
+
+
+/* Unknown TX setting - TX sample period ??? */
+#define ENE_TX_UNK1		0xFECB	/* set to 0x63 */
+
+/* Current recieved carrier period */
+#define ENE_RX_CARRIER		0xFECC	/* RX period (500 ns) */
+#define ENE_RX_CARRIER_VALID	0x80	/* Register content valid */
+
+
+/* TX period (1/carrier) */
+#define ENE_TX_PERIOD		0xFECE	/* TX period (500 ns) */
+#define ENE_TX_PERIOD_UNKBIT	0x80	/* This bit set on transmit*/
+#define ENE_TX_PERIOD_PULSE	0xFECF	/* TX pulse period (500 ns)*/
+
+/* Hardware versions */
+#define ENE_HW_VERSION		0xFF00	/* hardware revision */
+#define ENE_HW_UNK		0xFF1D
+#define ENE_HW_UNK_CLR		0x04
+#define ENE_HW_VER_MAJOR	0xFF1E	/* chip version */
+#define ENE_HW_VER_MINOR	0xFF1F
+#define ENE_HW_VER_OLD		0xFD00
+
+/* Normal/Learning carrier ranges - only valid if we have learning input*/
+/* TODO: test */
+#define ENE_NORMAL_RX_LOW	34
+#define ENE_NORMAL_RX_HI	38
+
+/* Tx carrier range */
+/* Hardware might be able to do more, but this range is enough for
+   all purposes */
+#define ENE_TX_PERIOD_MAX	32	/* corresponds to 29.4 kHz */
+#define ENE_TX_PERIOD_MIN	16	/* corrsponds to 62.5 kHz */
+
+
+
+/* Minimal and maximal gaps */
+
+/* Normal case:
+	Minimal gap is 0x7F * sample period
+	Maximum gap depends on hardware.
+	For KB3926B, it is unlimited, for newer models its around
+	250000, after which HW stops sending samples, and that is
+	not possible to change */
+
+/* Fan case:
+	Both minimal and maximal gaps are same, and equal to 0xFFF * 0x61
+	And there is nothing to change this setting
+*/
+
+#define ENE_MAXGAP		250000
+#define ENE_MINGAP		(127 * sample_period)
+
+/******************************************************************************/
+
+#define ENE_DRIVER_NAME		"enecir"
+#define ENE_TXBUF_SIZE (500 * sizeof(int))	/* 500 samples (arbitary) */
+
+#define ENE_IRQ_RX		1
+#define ENE_IRQ_TX		2
+
+#define  ENE_HW_B		1	/* 3926B */
+#define  ENE_HW_C		2	/* 3926C */
+#define  ENE_HW_D		3	/* 3926D */
+
+#define ene_printk(level, text, ...) \
+	printk(level ENE_DRIVER_NAME ": " text, ## __VA_ARGS__)
+
+#define ene_dbg(text, ...) \
+	if (debug) \
+		printk(KERN_DEBUG \
+			ENE_DRIVER_NAME ": " text "\n" , ## __VA_ARGS__)
+
+#define ene_dbg_verbose(text, ...) \
+	if (debug > 1) \
+		printk(KERN_DEBUG \
+			ENE_DRIVER_NAME ": " text "\n" , ## __VA_ARGS__)
+
+
+struct ene_device {
+	struct pnp_dev *pnp_dev;
+	struct lirc_driver *lirc_driver;
+	int in_use;
+
+	/* hw IO settings */
+	unsigned long hw_io;
+	int irq;
+	spinlock_t hw_lock;
+
+	/* HW features */
+	int hw_revision;			/* hardware revision */
+	int hw_learning_and_tx_capable;		/* learning capable */
+	int hw_gpio40_learning;			/* gpio40 is learning */
+	int hw_fan_as_normal_input;		/* fan input is used as */
+						/* regular input */
+	/* HW state*/
+	int rx_pointer;				/* hw pointer to rx buffer */
+	int rx_fan_input_inuse;			/* is fan input in use for rx*/
+	int tx_reg;				/* current reg used for TX */
+	u8  saved_conf1;			/* saved FEC0 reg */
+	int learning_enabled;			/* learning input enabled */
+
+	/* RX sample handling */
+	int rx_sample;				/* current recieved sample */
+	int rx_sample_pulse;			/* recieved sample is pulse */
+	int rx_idle;				/* idle mode for RX activated */
+	struct timeval rx_gap_start;		/* time of start of idle */
+	int rx_timeout;				/* time in ms of RX timeout */
+	int rx_send_timeout_packet;		/* do we send RX timeout */
+	int rx_timeout_sent;			/* we sent the timeout packet */
+	int rx_carrier_sense;			/* sense carrier */
+
+	/* TX sample handling */
+	unsigned int tx_sample;			/* current sample for TX */
+	int tx_sample_pulse;			/* current sample is pulse */
+
+	/* TX buffer */
+	int tx_buffer[ENE_TXBUF_SIZE];		/* input samples buffer*/
+	int tx_pos;				/* position in that bufer */
+	int tx_len;				/* current len of tx buffer */
+	int tx_underway;			/* TX is under way*/
+	int tx_done;				/* done transmitting */
+						/* one more sample pending*/
+	struct completion tx_complete;		/* TX completion */
+	struct timer_list tx_sim_timer;
+
+	/*TX settings */
+	int tx_period;
+	int tx_duty_cycle;
+	int transmitter_mask;
+};
diff --git a/drivers/staging/lirc/Kconfig b/drivers/staging/lirc/Kconfig
index 968c2ad..d199165 100644
--- a/drivers/staging/lirc/Kconfig
+++ b/drivers/staging/lirc/Kconfig
@@ -17,14 +17,6 @@ config LIRC_BT829
 	help
 	  Driver for the IR interface on BT829-based hardware
 
-config LIRC_ENE0100
-	tristate "ENE KB3924/ENE0100 CIR Port Reciever"
-	depends on LIRC_STAGING
-	help
-	  This is a driver for CIR port handled by ENE KB3924 embedded
-	  controller found on some notebooks.
-	  It appears on PNP list as ENE0100.
-
 config LIRC_I2C
 	tristate "I2C Based IR Receivers"
 	depends on LIRC_STAGING
diff --git a/drivers/staging/lirc/Makefile b/drivers/staging/lirc/Makefile
index a019182..7011d6c 100644
--- a/drivers/staging/lirc/Makefile
+++ b/drivers/staging/lirc/Makefile
@@ -4,7 +4,6 @@
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_LIRC_BT829)	+= lirc_bt829.o
-obj-$(CONFIG_LIRC_ENE0100)	+= lirc_ene0100.o
 obj-$(CONFIG_LIRC_I2C)		+= lirc_i2c.o
 obj-$(CONFIG_LIRC_IGORPLUGUSB)	+= lirc_igorplugusb.o
 obj-$(CONFIG_LIRC_IMON)		+= lirc_imon.o
diff --git a/drivers/staging/lirc/lirc_ene0100.c b/drivers/staging/lirc/lirc_ene0100.c
deleted file mode 100644
index a152c52..0000000
--- a/drivers/staging/lirc/lirc_ene0100.c
+++ /dev/null
@@ -1,646 +0,0 @@
-/*
- * driver for ENE KB3926 B/C/D CIR (also known as ENE0100)
- *
- * Copyright (C) 2009 Maxim Levitsky <maximlevitsky@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pnp.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include "lirc_ene0100.h"
-
-static int sample_period = 75;
-static int enable_idle = 1;
-static int enable_learning;
-
-static void ene_set_idle(struct ene_device *dev, int idle);
-static void ene_set_inputs(struct ene_device *dev, int enable);
-
-/* read a hardware register */
-static u8 ene_hw_read_reg(struct ene_device *dev, u16 reg)
-{
-	outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
-	outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
-	return inb(dev->hw_io + ENE_IO);
-}
-
-/* write a hardware register */
-static void ene_hw_write_reg(struct ene_device *dev, u16 reg, u8 value)
-{
-	outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
-	outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
-	outb(value, dev->hw_io + ENE_IO);
-}
-
-/* change specific bits in hardware register */
-static void ene_hw_write_reg_mask(struct ene_device *dev,
-				  u16 reg, u8 value, u8 mask)
-{
-	u8 regvalue;
-
-	outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
-	outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
-
-	regvalue = inb(dev->hw_io + ENE_IO) & ~mask;
-	regvalue |= (value & mask);
-	outb(regvalue, dev->hw_io + ENE_IO);
-}
-
-/* read irq status and ack it */
-static int ene_hw_irq_status(struct ene_device *dev, int *buffer_pointer)
-{
-	u8 irq_status;
-	u8 fw_flags1, fw_flags2;
-
-	fw_flags2 = ene_hw_read_reg(dev, ENE_FW2);
-
-	if (buffer_pointer)
-		*buffer_pointer = 4 * (fw_flags2 & ENE_FW2_BUF_HIGH);
-
-	if (dev->hw_revision < ENE_HW_C) {
-		irq_status = ene_hw_read_reg(dev, ENEB_IRQ_STATUS);
-
-		if (!(irq_status & ENEB_IRQ_STATUS_IR))
-			return 0;
-		ene_hw_write_reg(dev, ENEB_IRQ_STATUS,
-				 irq_status & ~ENEB_IRQ_STATUS_IR);
-
-		/* rev B support only recieving */
-		return ENE_IRQ_RX;
-	}
-
-	irq_status = ene_hw_read_reg(dev, ENEC_IRQ);
-
-	if (!(irq_status & ENEC_IRQ_STATUS))
-		return 0;
-
-	/* original driver does that twice - a workaround ? */
-	ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
-	ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
-
-	/* clear unknown flag in F8F9 */
-	if (fw_flags2 & ENE_FW2_IRQ_CLR)
-		ene_hw_write_reg(dev, ENE_FW2, fw_flags2 & ~ENE_FW2_IRQ_CLR);
-
-	/* check if this is a TX interrupt */
-	fw_flags1 = ene_hw_read_reg(dev, ENE_FW1);
-
-	if (fw_flags1 & ENE_FW1_TXIRQ) {
-		ene_hw_write_reg(dev, ENE_FW1, fw_flags1 & ~ENE_FW1_TXIRQ);
-		return ENE_IRQ_TX;
-	} else
-		return ENE_IRQ_RX;
-}
-
-static int ene_hw_detect(struct ene_device *dev)
-{
-	u8 chip_major, chip_minor;
-	u8 hw_revision, old_ver;
-	u8 tmp;
-	u8 fw_capabilities;
-
-	tmp = ene_hw_read_reg(dev, ENE_HW_UNK);
-	ene_hw_write_reg(dev, ENE_HW_UNK, tmp & ~ENE_HW_UNK_CLR);
-
-	chip_major = ene_hw_read_reg(dev, ENE_HW_VER_MAJOR);
-	chip_minor = ene_hw_read_reg(dev, ENE_HW_VER_MINOR);
-
-	ene_hw_write_reg(dev, ENE_HW_UNK, tmp);
-	hw_revision = ene_hw_read_reg(dev, ENE_HW_VERSION);
-	old_ver = ene_hw_read_reg(dev, ENE_HW_VER_OLD);
-
-	if (hw_revision == 0xFF) {
-
-		ene_printk(KERN_WARNING, "device seems to be disabled\n");
-		ene_printk(KERN_WARNING,
-			"send a mail to lirc-list@lists.sourceforge.net\n");
-		ene_printk(KERN_WARNING, "please attach output of acpidump\n");
-
-		return -ENODEV;
-	}
-
-	if (chip_major == 0x33) {
-		ene_printk(KERN_WARNING, "chips 0x33xx aren't supported yet\n");
-		return -ENODEV;
-	}
-
-	if (chip_major == 0x39 && chip_minor == 0x26 && hw_revision == 0xC0) {
-		dev->hw_revision = ENE_HW_C;
-		ene_printk(KERN_WARNING,
-		       "KB3926C detected, driver support is not complete!\n");
-
-	} else if (old_ver == 0x24 && hw_revision == 0xC0) {
-		dev->hw_revision = ENE_HW_B;
-		ene_printk(KERN_NOTICE, "KB3926B detected\n");
-	} else {
-		dev->hw_revision = ENE_HW_D;
-		ene_printk(KERN_WARNING,
-			"unknown ENE chip detected, assuming KB3926D\n");
-		ene_printk(KERN_WARNING, "driver support incomplete");
-
-	}
-
-	ene_printk(KERN_DEBUG, "chip is 0x%02x%02x - 0x%02x, 0x%02x\n",
-		chip_major, chip_minor, old_ver, hw_revision);
-
-
-	/* detect features hardware supports */
-
-	if (dev->hw_revision < ENE_HW_C)
-		return 0;
-
-	fw_capabilities = ene_hw_read_reg(dev, ENE_FW2);
-
-	dev->hw_gpio40_learning = fw_capabilities & ENE_FW2_GP40_AS_LEARN;
-	dev->hw_learning_and_tx_capable = fw_capabilities & ENE_FW2_LEARNING;
-
-	dev->hw_fan_as_normal_input = dev->hw_learning_and_tx_capable &&
-	    fw_capabilities & ENE_FW2_FAN_AS_NRML_IN;
-
-	ene_printk(KERN_NOTICE, "hardware features:\n");
-	ene_printk(KERN_NOTICE,
-		"learning and tx %s, gpio40_learn %s, fan_in %s\n",
-	       dev->hw_learning_and_tx_capable ? "on" : "off",
-	       dev->hw_gpio40_learning ? "on" : "off",
-	       dev->hw_fan_as_normal_input ? "on" : "off");
-
-	if (!dev->hw_learning_and_tx_capable && enable_learning)
-		enable_learning = 0;
-
-	if (dev->hw_learning_and_tx_capable) {
-		ene_printk(KERN_WARNING,
-		"Device supports transmitting, but the driver doesn't\n");
-		ene_printk(KERN_WARNING,
-		"due to lack of hardware to test against.\n");
-		ene_printk(KERN_WARNING,
-		"Send a mail to: lirc-list@lists.sourceforge.net\n");
-	}
-	return 0;
-}
-
-/* hardware initialization */
-static int ene_hw_init(void *data)
-{
-	u8 reg_value;
-	struct ene_device *dev = (struct ene_device *)data;
-	dev->in_use = 1;
-
-	if (dev->hw_revision < ENE_HW_C) {
-		ene_hw_write_reg(dev, ENEB_IRQ, dev->irq << 1);
-		ene_hw_write_reg(dev, ENEB_IRQ_UNK1, 0x01);
-	} else {
-		reg_value = ene_hw_read_reg(dev, ENEC_IRQ) & 0xF0;
-		reg_value |= ENEC_IRQ_UNK_EN;
-		reg_value &= ~ENEC_IRQ_STATUS;
-		reg_value |= (dev->irq & ENEC_IRQ_MASK);
-		ene_hw_write_reg(dev, ENEC_IRQ, reg_value);
-		ene_hw_write_reg(dev, ENE_TX_UNK1, 0x63);
-	}
-
-	ene_hw_write_reg(dev, ENE_CIR_CONF2, 0x00);
-	ene_set_inputs(dev, enable_learning);
-
-	/* set sampling period */
-	ene_hw_write_reg(dev, ENE_CIR_SAMPLE_PERIOD, sample_period);
-
-	/* ack any pending irqs - just in case */
-	ene_hw_irq_status(dev, NULL);
-
-	/* enter idle mode */
-	ene_set_idle(dev, 1);
-
-	/* enable firmware bits */
-	ene_hw_write_reg_mask(dev, ENE_FW1,
-			      ENE_FW1_ENABLE | ENE_FW1_IRQ,
-			      ENE_FW1_ENABLE | ENE_FW1_IRQ);
-	/* clear stats */
-	dev->sample = 0;
-	return 0;
-}
-
-/* this enables gpio40 signal, used if connected to wide band input*/
-static void ene_enable_gpio40(struct ene_device *dev, int enable)
-{
-	ene_hw_write_reg_mask(dev, ENE_CIR_CONF1, enable ?
-			      0 : ENE_CIR_CONF2_GPIO40DIS,
-			      ENE_CIR_CONF2_GPIO40DIS);
-}
-
-/* this enables the classic sampler */
-static void ene_enable_normal_recieve(struct ene_device *dev, int enable)
-{
-	ene_hw_write_reg(dev, ENE_CIR_CONF1, enable ? ENE_CIR_CONF1_ADC_ON : 0);
-}
-
-/* this enables recieve via fan input */
-static void ene_enable_fan_recieve(struct ene_device *dev, int enable)
-{
-	if (!enable)
-		ene_hw_write_reg(dev, ENE_FAN_AS_IN1, 0);
-	else {
-		ene_hw_write_reg(dev, ENE_FAN_AS_IN1, ENE_FAN_AS_IN1_EN);
-		ene_hw_write_reg(dev, ENE_FAN_AS_IN2, ENE_FAN_AS_IN2_EN);
-	}
-	dev->fan_input_inuse = enable;
-}
-
-/* determine which input to use*/
-static void ene_set_inputs(struct ene_device *dev, int learning_enable)
-{
-	ene_enable_normal_recieve(dev, 1);
-
-	/* old hardware doesn't support learning mode for sure */
-	if (dev->hw_revision <= ENE_HW_B)
-		return;
-
-	/* reciever not learning capable, still set gpio40 correctly */
-	if (!dev->hw_learning_and_tx_capable) {
-		ene_enable_gpio40(dev, !dev->hw_gpio40_learning);
-		return;
-	}
-
-	/* enable learning mode */
-	if (learning_enable) {
-		ene_enable_gpio40(dev, dev->hw_gpio40_learning);
-
-		/* fan input is not used for learning */
-		if (dev->hw_fan_as_normal_input)
-			ene_enable_fan_recieve(dev, 0);
-
-	/* disable learning mode */
-	} else {
-		if (dev->hw_fan_as_normal_input) {
-			ene_enable_fan_recieve(dev, 1);
-			ene_enable_normal_recieve(dev, 0);
-		} else
-			ene_enable_gpio40(dev, !dev->hw_gpio40_learning);
-	}
-
-	/* set few additional settings for this mode */
-	ene_hw_write_reg_mask(dev, ENE_CIR_CONF1, learning_enable ?
-			      ENE_CIR_CONF1_LEARN1 : 0, ENE_CIR_CONF1_LEARN1);
-
-	ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, learning_enable ?
-			      ENE_CIR_CONF2_LEARN2 : 0, ENE_CIR_CONF2_LEARN2);
-}
-
-/* deinitialization */
-static void ene_hw_deinit(void *data)
-{
-	struct ene_device *dev = (struct ene_device *)data;
-
-	/* disable samplers */
-	ene_enable_normal_recieve(dev, 0);
-
-	if (dev->hw_fan_as_normal_input)
-		ene_enable_fan_recieve(dev, 0);
-
-	/* disable hardware IRQ and firmware flag */
-	ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_ENABLE | ENE_FW1_IRQ);
-
-	ene_set_idle(dev, 1);
-	dev->in_use = 0;
-}
-
-/*  sends current sample to userspace */
-static void send_sample(struct ene_device *dev)
-{
-	int value = abs(dev->sample) & PULSE_MASK;
-
-	if (dev->sample > 0)
-		value |= PULSE_BIT;
-
-	if (!lirc_buffer_full(dev->lirc_driver->rbuf)) {
-		lirc_buffer_write(dev->lirc_driver->rbuf, (void *)&value);
-		wake_up(&dev->lirc_driver->rbuf->wait_poll);
-	}
-	dev->sample = 0;
-}
-
-/*  this updates current sample */
-static void update_sample(struct ene_device *dev, int sample)
-{
-	if (!dev->sample)
-		dev->sample = sample;
-	else if (same_sign(dev->sample, sample))
-		dev->sample += sample;
-	else {
-		send_sample(dev);
-		dev->sample = sample;
-	}
-}
-
-/* enable or disable idle mode */
-static void ene_set_idle(struct ene_device *dev, int idle)
-{
-	struct timeval now;
-	int disable = idle && enable_idle && (dev->hw_revision < ENE_HW_C);
-
-	ene_hw_write_reg_mask(dev, ENE_CIR_SAMPLE_PERIOD,
-			      disable ? 0 : ENE_CIR_SAMPLE_OVERFLOW,
-			      ENE_CIR_SAMPLE_OVERFLOW);
-	dev->idle = idle;
-
-	/* remember when we have entered the idle mode */
-	if (idle) {
-		do_gettimeofday(&dev->gap_start);
-		return;
-	}
-
-	/* send the gap between keypresses now */
-	do_gettimeofday(&now);
-
-	if (now.tv_sec - dev->gap_start.tv_sec > 16)
-		dev->sample = space(PULSE_MASK);
-	else
-		dev->sample = dev->sample +
-		    space(1000000ull * (now.tv_sec - dev->gap_start.tv_sec))
-		    + space(now.tv_usec - dev->gap_start.tv_usec);
-
-	if (abs(dev->sample) > PULSE_MASK)
-		dev->sample = space(PULSE_MASK);
-	send_sample(dev);
-}
-
-/* interrupt handler */
-static irqreturn_t ene_hw_irq(int irq, void *data)
-{
-	u16 hw_value;
-	int i, hw_sample;
-	int space;
-	int buffer_pointer;
-	int irq_status;
-
-	struct ene_device *dev = (struct ene_device *)data;
-	irq_status = ene_hw_irq_status(dev, &buffer_pointer);
-
-	if (!irq_status)
-		return IRQ_NONE;
-
-	/* TODO: only RX for now */
-	if (irq_status == ENE_IRQ_TX)
-		return IRQ_HANDLED;
-
-	for (i = 0; i < ENE_SAMPLES_SIZE; i++) {
-
-		hw_value = ene_hw_read_reg(dev,
-				ENE_SAMPLE_BUFFER + buffer_pointer + i);
-
-		if (dev->fan_input_inuse) {
-			/* read high part of the sample */
-			hw_value |= ene_hw_read_reg(dev,
-			    ENE_SAMPLE_BUFFER_FAN + buffer_pointer + i) << 8;
-
-			/* test for _space_ bit */
-			space = !(hw_value & ENE_FAN_SMPL_PULS_MSK);
-
-			/* clear space bit, and other unused bits */
-			hw_value &= ENE_FAN_VALUE_MASK;
-			hw_sample = hw_value * ENE_SAMPLE_PERIOD_FAN;
-
-		} else {
-			space = hw_value & ENE_SAMPLE_SPC_MASK;
-			hw_value &= ENE_SAMPLE_VALUE_MASK;
-			hw_sample = hw_value * sample_period;
-		}
-
-		/* no more data */
-		if (!(hw_value))
-			break;
-
-		if (space)
-			hw_sample *= -1;
-
-		/* overflow sample recieved, handle it */
-
-		if (!dev->fan_input_inuse && hw_value == ENE_SAMPLE_OVERFLOW) {
-
-			if (dev->idle)
-				continue;
-
-			if (dev->sample > 0 || abs(dev->sample) <= ENE_MAXGAP)
-				update_sample(dev, hw_sample);
-			else
-				ene_set_idle(dev, 1);
-
-			continue;
-		}
-
-		/* normal first sample recieved */
-		if (!dev->fan_input_inuse && dev->idle) {
-			ene_set_idle(dev, 0);
-
-			/* discard first recieved value, its random
-			   since its the time signal was off before
-			   first pulse if idle mode is enabled, HW
-			   does that for us */
-
-			if (!enable_idle)
-				continue;
-		}
-		update_sample(dev, hw_sample);
-		send_sample(dev);
-	}
-	return IRQ_HANDLED;
-}
-
-static int ene_probe(struct pnp_dev *pnp_dev,
-		     const struct pnp_device_id *dev_id)
-{
-	struct ene_device *dev;
-	struct lirc_driver *lirc_driver;
-	int error = -ENOMEM;
-
-	dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL);
-
-	if (!dev)
-		goto err1;
-
-	dev->pnp_dev = pnp_dev;
-	pnp_set_drvdata(pnp_dev, dev);
-
-
-	/* prepare lirc interface */
-	error = -ENOMEM;
-	lirc_driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
-
-	if (!lirc_driver)
-		goto err2;
-
-	dev->lirc_driver = lirc_driver;
-
-	strcpy(lirc_driver->name, ENE_DRIVER_NAME);
-	lirc_driver->minor = -1;
-	lirc_driver->code_length = sizeof(int) * 8;
-	lirc_driver->features = LIRC_CAN_REC_MODE2;
-	lirc_driver->data = dev;
-	lirc_driver->set_use_inc = ene_hw_init;
-	lirc_driver->set_use_dec = ene_hw_deinit;
-	lirc_driver->dev = &pnp_dev->dev;
-	lirc_driver->owner = THIS_MODULE;
-
-	lirc_driver->rbuf = kzalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
-
-	if (!lirc_driver->rbuf)
-		goto err3;
-
-	if (lirc_buffer_init(lirc_driver->rbuf, sizeof(int), sizeof(int) * 256))
-		goto err4;
-
-	error = -ENODEV;
-	if (lirc_register_driver(lirc_driver))
-		goto err5;
-
-	/* validate resources */
-	if (!pnp_port_valid(pnp_dev, 0) ||
-	    pnp_port_len(pnp_dev, 0) < ENE_MAX_IO)
-		goto err6;
-
-	if (!pnp_irq_valid(pnp_dev, 0))
-		goto err6;
-
-	dev->hw_io = pnp_port_start(pnp_dev, 0);
-	dev->irq = pnp_irq(pnp_dev, 0);
-
-	/* claim the resources */
-	error = -EBUSY;
-	if (!request_region(dev->hw_io, ENE_MAX_IO, ENE_DRIVER_NAME))
-		goto err6;
-
-	if (request_irq(dev->irq, ene_hw_irq,
-			IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev))
-		goto err7;
-
-	/* detect hardware version and features */
-	error = ene_hw_detect(dev);
-	if (error)
-		goto err8;
-
-	ene_printk(KERN_NOTICE, "driver has been succesfully loaded\n");
-	return 0;
-
-err8:
-	free_irq(dev->irq, dev);
-err7:
-	release_region(dev->hw_io, ENE_MAX_IO);
-err6:
-	lirc_unregister_driver(lirc_driver->minor);
-err5:
-	lirc_buffer_free(lirc_driver->rbuf);
-err4:
-	kfree(lirc_driver->rbuf);
-err3:
-	kfree(lirc_driver);
-err2:
-	kfree(dev);
-err1:
-	return error;
-}
-
-static void ene_remove(struct pnp_dev *pnp_dev)
-{
-	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
-	ene_hw_deinit(dev);
-	free_irq(dev->irq, dev);
-	release_region(dev->hw_io, ENE_MAX_IO);
-	lirc_unregister_driver(dev->lirc_driver->minor);
-	lirc_buffer_free(dev->lirc_driver->rbuf);
-	kfree(dev->lirc_driver);
-	kfree(dev);
-}
-
-#ifdef CONFIG_PM
-
-/* TODO: make 'wake on IR' configurable and add .shutdown */
-/* currently impossible due to lack of kernel support */
-
-static int ene_suspend(struct pnp_dev *pnp_dev, pm_message_t state)
-{
-	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
-	ene_hw_write_reg_mask(dev, ENE_FW1, ENE_FW1_WAKE, ENE_FW1_WAKE);
-	return 0;
-}
-
-static int ene_resume(struct pnp_dev *pnp_dev)
-{
-	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
-	if (dev->in_use)
-		ene_hw_init(dev);
-
-	ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_WAKE);
-	return 0;
-}
-
-#endif
-
-static const struct pnp_device_id ene_ids[] = {
-	{.id = "ENE0100",},
-	{},
-};
-
-static struct pnp_driver ene_driver = {
-	.name = ENE_DRIVER_NAME,
-	.id_table = ene_ids,
-	.flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
-
-	.probe = ene_probe,
-	.remove = __devexit_p(ene_remove),
-
-#ifdef CONFIG_PM
-	.suspend = ene_suspend,
-	.resume = ene_resume,
-#endif
-};
-
-static int __init ene_init(void)
-{
-	if (sample_period < 5) {
-		ene_printk(KERN_ERR, "sample period must be at\n");
-		ene_printk(KERN_ERR, "least 5 us, (at least 30 recommended)\n");
-		return -EINVAL;
-	}
-	return pnp_register_driver(&ene_driver);
-}
-
-static void ene_exit(void)
-{
-	pnp_unregister_driver(&ene_driver);
-}
-
-module_param(sample_period, int, S_IRUGO);
-MODULE_PARM_DESC(sample_period, "Hardware sample period (75 us default)");
-
-module_param(enable_idle, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(enable_idle,
-	"Enables turning off signal sampling after long inactivity time; "
-	"if disabled might help detecting input signal (default: enabled)");
-
-module_param(enable_learning, bool, S_IRUGO);
-MODULE_PARM_DESC(enable_learning, "Use wide band (learning) reciever");
-
-MODULE_DEVICE_TABLE(pnp, ene_ids);
-MODULE_DESCRIPTION
-    ("LIRC driver for KB3926B/KB3926C/KB3926D (aka ENE0100) CIR port");
-MODULE_AUTHOR("Maxim Levitsky");
-MODULE_LICENSE("GPL");
-
-module_init(ene_init);
-module_exit(ene_exit);
diff --git a/drivers/staging/lirc/lirc_ene0100.h b/drivers/staging/lirc/lirc_ene0100.h
deleted file mode 100644
index 825045d..0000000
--- a/drivers/staging/lirc/lirc_ene0100.h
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * driver for ENE KB3926 B/C/D CIR (also known as ENE0100)
- *
- * Copyright (C) 2009 Maxim Levitsky <maximlevitsky@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include <media/lirc.h>
-#include <media/lirc_dev.h>
-
-/* hardware address */
-#define ENE_STATUS		0	 /* hardware status - unused */
-#define ENE_ADDR_HI 		1	 /* hi byte of register address */
-#define ENE_ADDR_LO 		2	 /* low byte of register address */
-#define ENE_IO 			3	 /* read/write window */
-#define ENE_MAX_IO		4
-
-/* 8 bytes of samples, divided in 2 halfs*/
-#define ENE_SAMPLE_BUFFER 	0xF8F0	 /* regular sample buffer */
-#define ENE_SAMPLE_SPC_MASK 	(1 << 7) /* sample is space */
-#define ENE_SAMPLE_VALUE_MASK	0x7F
-#define ENE_SAMPLE_OVERFLOW	0x7F
-#define ENE_SAMPLES_SIZE	4
-
-/* fan input sample buffer */
-#define ENE_SAMPLE_BUFFER_FAN	0xF8FB	 /* this buffer holds high byte of */
-					 /* each sample of normal buffer */
-
-#define ENE_FAN_SMPL_PULS_MSK	0x8000	 /* this bit of combined sample */
-					 /* if set, says that sample is pulse */
-#define ENE_FAN_VALUE_MASK	0x0FFF   /* mask for valid bits of the value */
-
-/* first firmware register */
-#define ENE_FW1			0xF8F8
-#define	ENE_FW1_ENABLE		(1 << 0) /* enable fw processing */
-#define ENE_FW1_TXIRQ		(1 << 1) /* TX interrupt pending */
-#define ENE_FW1_WAKE		(1 << 6) /* enable wake from S3 */
-#define ENE_FW1_IRQ		(1 << 7) /* enable interrupt */
-
-/* second firmware register */
-#define ENE_FW2			0xF8F9
-#define ENE_FW2_BUF_HIGH	(1 << 0) /* which half of the buffer to read */
-#define ENE_FW2_IRQ_CLR		(1 << 2) /* clear this on IRQ */
-#define ENE_FW2_GP40_AS_LEARN	(1 << 4) /* normal input is used as */
-					 /* learning input */
-#define ENE_FW2_FAN_AS_NRML_IN	(1 << 6) /* fan is used as normal input */
-#define ENE_FW2_LEARNING	(1 << 7) /* hardware supports learning and TX */
-
-/* fan as input settings - only if learning capable */
-#define ENE_FAN_AS_IN1		0xFE30   /* fan init reg 1 */
-#define ENE_FAN_AS_IN1_EN	0xCD
-#define ENE_FAN_AS_IN2		0xFE31   /* fan init reg 2 */
-#define ENE_FAN_AS_IN2_EN	0x03
-#define ENE_SAMPLE_PERIOD_FAN   61	 /* fan input has fixed sample period */
-
-/* IRQ registers block (for revision B) */
-#define ENEB_IRQ		0xFD09	 /* IRQ number */
-#define ENEB_IRQ_UNK1		0xFD17	 /* unknown setting = 1 */
-#define ENEB_IRQ_STATUS		0xFD80	 /* irq status */
-#define ENEB_IRQ_STATUS_IR	(1 << 5) /* IR irq */
-
-/* IRQ registers block (for revision C,D) */
-#define ENEC_IRQ		0xFE9B	 /* new irq settings register */
-#define ENEC_IRQ_MASK		0x0F	 /* irq number mask */
-#define ENEC_IRQ_UNK_EN		(1 << 4) /* always enabled */
-#define ENEC_IRQ_STATUS		(1 << 5) /* irq status and ACK */
-
-/* CIR block settings */
-#define ENE_CIR_CONF1		0xFEC0
-#define ENE_CIR_CONF1_ADC_ON	0x7	 /* reciever on gpio40 enabled */
-#define ENE_CIR_CONF1_LEARN1	(1 << 3) /* enabled on learning mode */
-#define ENE_CIR_CONF1_TX_ON	0x30	 /* enabled on transmit */
-#define ENE_CIR_CONF1_TX_CARR	(1 << 7) /* send TX carrier or not */
-
-#define ENE_CIR_CONF2		0xFEC1	 /* unknown setting = 0 */
-#define ENE_CIR_CONF2_LEARN2	(1 << 4) /* set on enable learning */
-#define ENE_CIR_CONF2_GPIO40DIS	(1 << 5) /* disable normal input via gpio40 */
-
-#define ENE_CIR_SAMPLE_PERIOD	0xFEC8	 /* sample period in us */
-#define ENE_CIR_SAMPLE_OVERFLOW	(1 << 7) /* interrupt on overflows if set */
-
-
-/* transmitter - not implemented yet */
-/* KB3926C and higher */
-/* transmission is very similiar to recieving, a byte is written to */
-/* ENE_TX_INPUT, in same manner as it is read from sample buffer */
-/* sample period is fixed*/
-
-
-/* transmitter ports */
-#define ENE_TX_PORT1		0xFC01	 /* this enables one or both */
-#define ENE_TX_PORT1_EN		(1 << 5) /* TX ports */
-#define ENE_TX_PORT2		0xFC08
-#define ENE_TX_PORT2_EN		(1 << 1)
-
-#define ENE_TX_INPUT		0xFEC9	 /* next byte to transmit */
-#define ENE_TX_SPC_MASK 	(1 << 7) /* Transmitted sample is space */
-#define ENE_TX_UNK1		0xFECB	 /* set to 0x63 */
-#define ENE_TX_SMPL_PERIOD	50	 /* transmit sample period */
-
-
-#define ENE_TX_CARRIER		0xFECE	 /* TX carrier * 2 (khz) */
-#define ENE_TX_CARRIER_UNKBIT	0x80	 /* This bit set on transmit */
-#define ENE_TX_CARRIER_LOW	0xFECF	 /* TX carrier / 2 */
-
-/* Hardware versions */
-#define ENE_HW_VERSION		0xFF00	 /* hardware revision */
-#define ENE_HW_UNK 		0xFF1D
-#define ENE_HW_UNK_CLR		(1 << 2)
-#define ENE_HW_VER_MAJOR	0xFF1E	 /* chip version */
-#define ENE_HW_VER_MINOR	0xFF1F
-#define ENE_HW_VER_OLD		0xFD00
-
-#define same_sign(a, b) ((((a) > 0) && (b) > 0) || ((a) < 0 && (b) < 0))
-
-#define ENE_DRIVER_NAME 	"enecir"
-#define ENE_MAXGAP 		250000	 /* this is amount of time we wait
-					 before turning the sampler, chosen
-					 arbitry */
-
-#define space(len) 	       (-(len))	 /* add a space */
-
-/* software defines */
-#define ENE_IRQ_RX		1
-#define ENE_IRQ_TX		2
-
-#define  ENE_HW_B		1	/* 3926B */
-#define  ENE_HW_C		2	/* 3926C */
-#define  ENE_HW_D		3	/* 3926D */
-
-#define ene_printk(level, text, ...) \
-	printk(level ENE_DRIVER_NAME ": " text, ## __VA_ARGS__)
-
-struct ene_device {
-	struct pnp_dev *pnp_dev;
-	struct lirc_driver *lirc_driver;
-
-	/* hw settings */
-	unsigned long hw_io;
-	int irq;
-
-	int hw_revision;			/* hardware revision */
-	int hw_learning_and_tx_capable;		/* learning capable */
-	int hw_gpio40_learning;			/* gpio40 is learning */
-	int hw_fan_as_normal_input;	/* fan input is used as regular input */
-
-	/* device data */
-	int idle;
-	int fan_input_inuse;
-
-	int sample;
-	int in_use;
-
-	struct timeval gap_start;
-};
-- 
1.7.0.4

[PATCH 13/13] IR: Port ene driver to new IR subsystem and enable it.

[Maxim Levitsky]

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
---
 MAINTAINERS               |    6 +
 drivers/media/IR/Kconfig  |   14 +
 drivers/media/IR/Makefile |    1 +
 drivers/media/IR/ene_ir.c |  595 +++++++++++++++++----------------------------
 drivers/media/IR/ene_ir.h |   51 ++---
 5 files changed, 265 insertions(+), 402 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 56a36d7..587785a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2188,6 +2188,12 @@ F:	drivers/misc/cb710/
 F:	drivers/mmc/host/cb710-mmc.*
 F:	include/linux/cb710.h
 
+ENE KB2426 (ENE0100/ENE020XX) INFRARED RECEIVER
+M:	Maxim Levitsky <maximlevitsky@gmail.com>
+S:	Maintained
+F:	drivers/media/IR/ene_ir.c
+F:	drivers/media/IR/ene_ir.h
+
 EPSON 1355 FRAMEBUFFER DRIVER
 M:	Christopher Hoover <ch@murgatroid.com>
 M:	Christopher Hoover <ch@hpl.hp.com>
diff --git a/drivers/media/IR/Kconfig b/drivers/media/IR/Kconfig
index fc48a3f..3f62bf9 100644
--- a/drivers/media/IR/Kconfig
+++ b/drivers/media/IR/Kconfig
@@ -105,4 +105,18 @@ config IR_MCEUSB
 	   To compile this driver as a module, choose M here: the
 	   module will be called mceusb.
 
+config IR_ENE
+	tristate "ENE eHome Receiver/Transciever (pnp id: ENE0100/ENE02xxx)"
+	depends on PNP
+	depends on IR_CORE
+	---help---
+	   Say Y here to enable support for integrated infrared receiver
+	   /transciever made by ENE.
+
+	   You can see if you have it by looking at lspnp output.
+	   Output should include ENE0100 ENE0200 or something similiar.
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called ene_ir.
+
 endif #IR_CORE
diff --git a/drivers/media/IR/Makefile b/drivers/media/IR/Makefile
index 2ae4f3a..3262a68 100644
--- a/drivers/media/IR/Makefile
+++ b/drivers/media/IR/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o
 # stand-alone IR receivers/transmitters
 obj-$(CONFIG_IR_IMON) += imon.o
 obj-$(CONFIG_IR_MCEUSB) += mceusb.o
+obj-$(CONFIG_IR_ENE) += ene_ir.o
diff --git a/drivers/media/IR/ene_ir.c b/drivers/media/IR/ene_ir.c
index 9d11caf..de1e5c4 100644
--- a/drivers/media/IR/ene_ir.c
+++ b/drivers/media/IR/ene_ir.c
@@ -1,5 +1,5 @@
 /*
- * driver for ENE KB3926 B/C/D CIR (also known as ENE0100/ENE0200/ENE0201)
+ * driver for ENE KB3926 B/C/D CIR (pnp id: ENE0XXX)
  *
  * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
  *
@@ -25,20 +25,20 @@
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
-#include <linux/uaccess.h>
-#include "lirc_ene0100.h"
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <media/ir-core.h>
+#include <media/ir-common.h>
+#include "ene_ir.h"
 
 
 static int sample_period = -1;
 static int enable_idle = 1;
-static int enable_duty_carrier;
 static int input = 1;
 static int debug;
 static int txsim;
 
-static void ene_rx_set_idle(struct ene_device *dev, int idle);
 static int ene_irq_status(struct ene_device *dev);
-static void ene_send_sample(struct ene_device *dev, unsigned long sample);
 
 /* read a hardware register */
 static u8 ene_hw_read_reg(struct ene_device *dev, u16 reg)
@@ -85,6 +85,7 @@ static int ene_hw_detect(struct ene_device *dev)
 	u8 hw_revision, old_ver;
 	u8 tmp;
 	u8 fw_capabilities;
+	int pll_freq;
 
 	tmp = ene_hw_read_reg(dev, ENE_HW_UNK);
 	ene_hw_write_reg(dev, ENE_HW_UNK, tmp & ~ENE_HW_UNK_CLR);
@@ -96,6 +97,17 @@ static int ene_hw_detect(struct ene_device *dev)
 	hw_revision = ene_hw_read_reg(dev, ENE_HW_VERSION);
 	old_ver = ene_hw_read_reg(dev, ENE_HW_VER_OLD);
 
+	pll_freq = (ene_hw_read_reg(dev, ENE_PLLFRH) << 4) +
+		(ene_hw_read_reg(dev, ENE_PLLFRL) >> 2);
+
+	if (pll_freq != 1000)
+		dev->rx_period_adjust = 4;
+	else
+		dev->rx_period_adjust = 2;
+
+
+	ene_printk(KERN_NOTICE, "PLL freq = %d\n", pll_freq);
+
 	if (hw_revision == 0xFF) {
 
 		ene_printk(KERN_WARNING, "device seems to be disabled\n");
@@ -160,7 +172,7 @@ static int ene_hw_detect(struct ene_device *dev)
 }
 
 /* this enables/disables IR input via gpio40*/
-static void ene_enable_gpio40_recieve(struct ene_device *dev, int enable)
+static void ene_enable_gpio40_receive(struct ene_device *dev, int enable)
 {
 	ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, enable ?
 			      0 : ENE_CIR_CONF2_GPIO40DIS,
@@ -168,13 +180,13 @@ static void ene_enable_gpio40_recieve(struct ene_device *dev, int enable)
 }
 
 /* this enables/disables IR via standard input */
-static void ene_enable_normal_recieve(struct ene_device *dev, int enable)
+static void ene_enable_normal_receive(struct ene_device *dev, int enable)
 {
 	ene_hw_write_reg(dev, ENE_CIR_CONF1, enable ? ENE_CIR_CONF1_RX_ON : 0);
 }
 
 /* this enables/disables IR input via unused fan tachtometer input */
-static void ene_enable_fan_recieve(struct ene_device *dev, int enable)
+static void ene_enable_fan_receive(struct ene_device *dev, int enable)
 {
 	if (!enable)
 		ene_hw_write_reg(dev, ENE_FAN_AS_IN1, 0);
@@ -186,7 +198,7 @@ static void ene_enable_fan_recieve(struct ene_device *dev, int enable)
 }
 
 
-/* Sense current recieved carrier */
+/* Sense current received carrier */
 static int ene_rx_sense_carrier(struct ene_device *dev)
 {
 	int period = ene_hw_read_reg(dev, ENE_RX_CARRIER);
@@ -209,37 +221,37 @@ static int ene_rx_sense_carrier(struct ene_device *dev)
 /* determine which input to use*/
 static void ene_rx_set_inputs(struct ene_device *dev)
 {
-	int learning_mode = dev->learning_enabled || dev->rx_carrier_sense;
+	int learning_mode = dev->learning_enabled;
 
-	ene_dbg("RX: setup reciever, learning mode = %d", learning_mode);
+	ene_dbg("RX: setup receiver, learning mode = %d", learning_mode);
 
-	ene_enable_normal_recieve(dev, 1);
+	ene_enable_normal_receive(dev, 1);
 
 	/* old hardware doesn't support learning mode for sure */
 	if (dev->hw_revision <= ENE_HW_B)
 		return;
 
-	/* reciever not learning capable, still set gpio40 correctly */
+	/* receiver not learning capable, still set gpio40 correctly */
 	if (!dev->hw_learning_and_tx_capable) {
-		ene_enable_gpio40_recieve(dev, !dev->hw_gpio40_learning);
+		ene_enable_gpio40_receive(dev, !dev->hw_gpio40_learning);
 		return;
 	}
 
 	/* enable learning mode */
 	if (learning_mode) {
-		ene_enable_gpio40_recieve(dev, dev->hw_gpio40_learning);
+		ene_enable_gpio40_receive(dev, dev->hw_gpio40_learning);
 
 		/* fan input is not used for learning */
 		if (dev->hw_fan_as_normal_input)
-			ene_enable_fan_recieve(dev, 0);
+			ene_enable_fan_receive(dev, 0);
 
 	/* disable learning mode */
 	} else {
 		if (dev->hw_fan_as_normal_input) {
-			ene_enable_fan_recieve(dev, 1);
-			ene_enable_normal_recieve(dev, 0);
+			ene_enable_fan_receive(dev, 1);
+			ene_enable_normal_receive(dev, 0);
 		} else
-			ene_enable_gpio40_recieve(dev,
+			ene_enable_gpio40_receive(dev,
 					!dev->hw_gpio40_learning);
 	}
 
@@ -249,6 +261,16 @@ static void ene_rx_set_inputs(struct ene_device *dev)
 
 	ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, learning_mode ?
 			      ENE_CIR_CONF2_LEARN2 : 0, ENE_CIR_CONF2_LEARN2);
+
+	if (dev->rx_fan_input_inuse) {
+		dev->props->rx_resolution = ENE_SAMPLE_PERIOD_FAN * 1000;
+
+		dev->props->timeout =
+			ENE_FAN_VALUE_MASK * ENE_SAMPLE_PERIOD_FAN * 1000;
+	} else {
+		dev->props->rx_resolution = sample_period * 1000;
+		dev->props->timeout = ENE_MAXGAP * 1000;
+	}
 }
 
 /* Enable the device for receive */
@@ -277,147 +299,33 @@ static void ene_rx_enable(struct ene_device *dev)
 	/* ack any pending irqs - just in case */
 	ene_irq_status(dev);
 
-	/* enter idle mode */
-	ene_rx_set_idle(dev, 1);
-
 	/* enable firmware bits */
 	ene_hw_write_reg_mask(dev, ENE_FW1,
 			      ENE_FW1_ENABLE | ENE_FW1_IRQ,
 			      ENE_FW1_ENABLE | ENE_FW1_IRQ);
+
+	/* enter idle mode */
+	ir_raw_event_set_idle(dev->idev, 1);
+	ir_raw_event_reset(dev->idev);
+
 }
 
-/* Disable the device reciever */
+/* Disable the device receiver */
 static void ene_rx_disable(struct ene_device *dev)
 {
 	/* disable inputs */
-	ene_enable_normal_recieve(dev, 0);
+	ene_enable_normal_receive(dev, 0);
 
 	if (dev->hw_fan_as_normal_input)
-		ene_enable_fan_recieve(dev, 0);
+		ene_enable_fan_receive(dev, 0);
 
 	/* disable hardware IRQ and firmware flag */
 	ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_ENABLE | ENE_FW1_IRQ);
 
-	ene_rx_set_idle(dev, 1);
-}
-
-/*  send current sample to the user */
-static void ene_rx_flush(struct ene_device *dev, int timeout)
-{
-	unsigned long value;
-
-	value =	dev->rx_sample_pulse ? LIRC_PULSE(dev->rx_sample) :
-					LIRC_SPACE(dev->rx_sample);
-	ene_send_sample(dev, value);
-	dev->rx_sample = 0;
-	dev->rx_sample_pulse = 0;
-}
-
-/* recieve new sample and process it */
-static void ene_rx_sample(struct ene_device *dev, int sample, int is_pulse)
-{
-	ene_dbg("RX: sample %8d (%s)", sample, is_pulse ? "pulse" : "space");
-
-	/* ignore spaces in idle mode, can get them on revC */
-	/* also ignore a space in front of first pulse */
-	if (dev->rx_idle && !is_pulse)
-		return;
-
-	/* get out of idle mode now */
-	if (dev->rx_idle)
-		ene_rx_set_idle(dev, 0);
-
-	if (!dev->rx_sample) {
-		dev->rx_sample = sample;
-		dev->rx_sample_pulse = is_pulse;
-	} else if (is_pulse == dev->rx_sample_pulse)
-		dev->rx_sample += sample;
-	else {
-		ene_rx_flush(dev, 0);
-		dev->rx_sample = sample;
-		dev->rx_sample_pulse = is_pulse;
-	}
-
-	if (is_pulse)
-		return;
-
-	/* overflow sample from fan input recieved, enable idle mode */
-	if (dev->rx_fan_input_inuse &&
-		sample == ENE_FAN_VALUE_MASK * ENE_SAMPLE_PERIOD_FAN) {
-		ene_rx_set_idle(dev, 1);
-		return;
-	}
-
-	if (!dev->rx_fan_input_inuse) {
-		/* Report timeout if enabled */
-		if (dev->rx_timeout && dev->rx_send_timeout_packet &&
-			!dev->rx_timeout_sent &&
-				dev->rx_sample > dev->rx_timeout) {
-			ene_dbg("RX: sending timeout sample");
-			ene_send_sample(dev, LIRC_TIMEOUT(dev->rx_sample));
-			dev->rx_timeout_sent = 1;
-		}
-
-		/* too large sample accumulated via normal input.
-		note that on revC, hardware idle mode turns on automaticly,
-			so max gap should be less that the gap after which
-			hw stops sending samples */
-		if (dev->rx_sample > ENE_MAXGAP) {
-			ene_rx_set_idle(dev, 1);
-			return;
-		}
-	}
+	ir_raw_event_set_idle(dev->idev, 1);
+	ir_raw_event_reset(dev->idev);
 }
 
-/* enable or disable idle mode */
-static void ene_rx_set_idle(struct ene_device *dev, int idle)
-{
-	struct timeval now;
-	int disable_sampler = 0;
-
-
-	/* Also put hardware sampler in 'idle' mode on revB*/
-	/* revC and higher do that automaticly (firmware does?) */
-	if ((dev->hw_revision < ENE_HW_C) && enable_idle)
-		if (idle)
-			disable_sampler = 1;
-
-	ene_hw_write_reg_mask(dev, ENE_CIR_SAMPLE_PERIOD,
-			      disable_sampler ? 0 : ENE_CIR_SAMPLE_OVERFLOW,
-			      ENE_CIR_SAMPLE_OVERFLOW);
-	dev->rx_idle = idle;
-
-	/* remember when we have entered the idle mode */
-	if (idle) {
-		ene_dbg("RX: going into idle mode");
-		do_gettimeofday(&dev->rx_gap_start);
-		return;
-	}
-
-	ene_dbg("RX: back from idle mode");
-
-	/* send the gap between keypresses now */
-	do_gettimeofday(&now);
-
-	if (dev->rx_sample_pulse) {
-		ene_dbg("RX: somehow we recieved a pulse before idle mode???");
-		return;
-	}
-
-	/* manually calculate and recieve the gap between keypresses */
-	if (now.tv_sec - dev->rx_gap_start.tv_sec > 16)
-		dev->rx_sample = LIRC_SPACE(LIRC_VALUE_MASK);
-	else
-		dev->rx_sample +=
-		    1000000ull * (now.tv_sec - dev->rx_gap_start.tv_sec)
-		    + now.tv_usec - dev->rx_gap_start.tv_usec;
-
-	if (dev->rx_sample > LIRC_SPACE(LIRC_VALUE_MASK))
-		dev->rx_sample = LIRC_SPACE(LIRC_VALUE_MASK);
-
-	ene_rx_flush(dev, 0);
-	dev->rx_timeout_sent = 0;
-}
 
 /* prepare transmission */
 static void ene_tx_prepare(struct ene_device *dev)
@@ -436,6 +344,8 @@ static void ene_tx_prepare(struct ene_device *dev)
 	/* Set carrier */
 	if (dev->tx_period) {
 
+		/* NOTE: duty cycle handling is just a guess, it might
+			not be aviable. Default values were tested */
 		int tx_period_in500ns = dev->tx_period * 2;
 
 		int tx_pulse_width_in_500ns =
@@ -459,7 +369,6 @@ static void ene_tx_prepare(struct ene_device *dev)
 		conf1 &= ~ENE_CIR_CONF1_TX_CARR;
 
 	ene_hw_write_reg(dev, ENE_CIR_CONF1, conf1);
-	dev->tx_underway = 1;
 
 }
 
@@ -467,11 +376,11 @@ static void ene_tx_prepare(struct ene_device *dev)
 static void ene_tx_complete(struct ene_device *dev)
 {
 	ene_hw_write_reg(dev, ENE_CIR_CONF1, dev->saved_conf1);
-	dev->tx_underway = 0;
+	dev->tx_buffer = NULL;
 }
 
 /* set transmit mask */
-static void ene_tx_set_transmiter_mask(struct ene_device *dev)
+static void ene_tx_hw_set_transmiter_mask(struct ene_device *dev)
 {
 	u8 txport1 = ene_hw_read_reg(dev, ENE_TX_PORT1) & ~ENE_TX_PORT1_EN;
 	u8 txport2 = ene_hw_read_reg(dev, ENE_TX_PORT2) & ~ENE_TX_PORT2_EN;
@@ -492,8 +401,8 @@ static void ene_tx_sample(struct ene_device *dev)
 	u8 raw_tx;
 	u32 sample;
 
-	if (!dev->tx_underway) {
-		ene_dbg("TX: attempt to transmit while hw isn't setup");
+	if (!dev->tx_buffer) {
+		ene_dbg("TX: attempt to transmit NULL buffer");
 		return;
 	}
 
@@ -623,6 +532,7 @@ static irqreturn_t ene_isr(int irq, void *data)
 	int carrier = 0;
 	irqreturn_t retval = IRQ_NONE;
 	struct ene_device *dev = (struct ene_device *)data;
+	struct ir_raw_event ev;
 
 
 	spin_lock_irqsave(&dev->hw_lock, flags);
@@ -646,12 +556,13 @@ static irqreturn_t ene_isr(int irq, void *data)
 		goto unlock;
 
 
-	if ((debug && dev->learning_enabled) || dev->rx_carrier_sense)
+	if (dev->carrier_detect_enabled || debug)
 		carrier = ene_rx_sense_carrier(dev);
-
-	if (dev->rx_carrier_sense && carrier)
-		ene_send_sample(dev, LIRC_FREQUENCY(carrier));
-
+#if 0
+	/* TODO */
+	if (dev->carrier_detect_enabled && carrier)
+		ir_raw_event_report_frequency(dev->idev, carrier);
+#endif
 
 	for (i = 0; i < ENE_SAMPLES_SIZE; i++) {
 		hw_value = ene_hw_read_reg(dev,
@@ -672,13 +583,25 @@ static irqreturn_t ene_isr(int irq, void *data)
 			pulse = !(hw_value & ENE_SAMPLE_SPC_MASK);
 			hw_value &= ENE_SAMPLE_VALUE_MASK;
 			hw_sample = hw_value * sample_period;
+
+			if (dev->rx_period_adjust) {
+				hw_sample *= (100 - dev->rx_period_adjust);
+				hw_sample /= 100;
+			}
 		}
 		/* no more data */
 		if (!(hw_value))
 			break;
 
-		ene_rx_sample(dev, hw_sample, pulse);
+		ene_dbg("RX: %d (%s)", hw_sample, pulse ? "pulse" : "space");
+
+
+		ev.duration = hw_sample * 1000;
+		ev.pulse = pulse;
+		ir_raw_event_store_with_filter(dev->idev, &ev);
 	}
+
+	ir_raw_event_handle(dev->idev);
 unlock:
 	spin_unlock_irqrestore(&dev->hw_lock, flags);
 	return retval;
@@ -687,8 +610,6 @@ unlock:
 /* Initialize default settings */
 static void ene_setup_settings(struct ene_device *dev)
 {
-	dev->rx_send_timeout_packet = 0;
-	dev->rx_timeout = ENE_MAXGAP;
 	dev->tx_period = 32;
 	dev->tx_duty_cycle = 25; /*%*/
 	dev->transmitter_mask = 3;
@@ -698,11 +619,7 @@ static void ene_setup_settings(struct ene_device *dev)
 	dev->learning_enabled =
 		(input == 2 && dev->hw_learning_and_tx_capable);
 
-	/* Clear accumulated sample bufer */
-	dev->rx_sample = 0;
-	dev->rx_sample_pulse = 0;
 	dev->rx_pointer = -1;
-	dev->rx_carrier_sense = 0;
 
 }
 
@@ -732,144 +649,97 @@ static void ene_close(void *data)
 	spin_unlock_irqrestore(&dev->hw_lock, flags);
 }
 
-/* outside interface for settings */
-static int ene_ioctl(struct inode *node, struct file *file,
-		      unsigned int cmd, unsigned long arg)
+/* outside interface: set transmitter mask */
+static int ene_set_tx_mask(void *data, u32 tx_mask)
 {
-	int lvalue = 0, retval, tmp;
+	struct ene_device *dev = (struct ene_device *)data;
 	unsigned long flags;
-	struct ene_device *dev = lirc_get_pdata(file);
-
-
-	switch (cmd) {
-	case LIRC_SET_SEND_CARRIER:
-	case LIRC_SET_SEND_DUTY_CYCLE:
-	case LIRC_SET_TRANSMITTER_MASK:
-	case LIRC_SET_MEASURE_CARRIER_MODE:
-	case LIRC_SET_REC_CARRIER:
-		/* All these aren't possible without this */
-		if (!dev->hw_learning_and_tx_capable)
-			return -ENOSYS;
-		/* Fall through */
-	case LIRC_SET_REC_TIMEOUT:
-	case LIRC_SET_REC_TIMEOUT_REPORTS:
-		retval = get_user(lvalue, (unsigned int *) arg);
-		if (retval)
-			return retval;
+	ene_dbg("TX: attempt to set transmitter mask %02x", tx_mask);
+
+	/* invalid txmask */
+	if (!tx_mask || tx_mask & ~0x3) {
+		ene_dbg("TX: invalid mask");
+		/* return count of transmitters */
+		return 2;
 	}
 
-	switch (cmd) {
-	case LIRC_SET_SEND_CARRIER:
-		ene_dbg("TX: attempt to set tx carrier to %d kHz", lvalue);
-		tmp = 1000000 / lvalue; /* (1 / freq) (* # usec in 1 sec) */
+	spin_lock_irqsave(&dev->hw_lock, flags);
+	dev->transmitter_mask = tx_mask;
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+	return 0;
+}
 
-		if (tmp && (tmp > ENE_TX_PERIOD_MAX ||
-				tmp < ENE_TX_PERIOD_MIN)) {
+/* outside interface : set tx carrier */
+static int ene_set_tx_carrier(void *data, u32 carrier)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	unsigned long flags;
+	u32 period = 1000000 / carrier; /* (1 / freq) (* # usec in 1 sec) */
 
-			ene_dbg("TX: out of range %d-%d carrier, "
-				"falling back to 32 kHz",
-				1000 / ENE_TX_PERIOD_MIN,
-				1000 / ENE_TX_PERIOD_MAX);
+	ene_dbg("TX: attempt to set tx carrier to %d kHz", carrier);
 
-			tmp = 32; /* this is just a coincidence!!! */
-		}
-		ene_dbg("TX: set carrier to %d kHz", lvalue);
+	if (period && (period > ENE_TX_PERIOD_MAX ||
+			period < ENE_TX_PERIOD_MIN)) {
 
-		spin_lock_irqsave(&dev->hw_lock, flags);
-		dev->tx_period = tmp;
-		spin_unlock_irqrestore(&dev->hw_lock, flags);
-		break;
-	case LIRC_SET_SEND_DUTY_CYCLE:
-		ene_dbg("TX: attempt to set duty cycle to %d%%", lvalue);
+		ene_dbg("TX: out of range %d-%d carrier, "
+			"falling back to 32 kHz",
+			1000 / ENE_TX_PERIOD_MIN,
+			1000 / ENE_TX_PERIOD_MAX);
 
-		if ((lvalue >= 100) || (lvalue <= 0)) {
-			retval = -EINVAL;
-			break;
-		}
-		spin_lock_irqsave(&dev->hw_lock, flags);
-		dev->tx_duty_cycle = lvalue;
-		spin_unlock_irqrestore(&dev->hw_lock, flags);
-		break;
-	case LIRC_SET_TRANSMITTER_MASK:
-		ene_dbg("TX: attempt to set transmitter mask %02x", lvalue);
-
-		/* invalid txmask */
-		if (!lvalue || lvalue & ~0x3) {
-			ene_dbg("TX: invalid mask");
-			/* this supposed to return num of transmitters */
-			retval =  2;
-			break;
-		}
-		spin_lock_irqsave(&dev->hw_lock, flags);
-		dev->transmitter_mask = lvalue;
-		spin_unlock_irqrestore(&dev->hw_lock, flags);
-		break;
-	case LIRC_SET_REC_CARRIER:
-		tmp = (lvalue > ENE_NORMAL_RX_HI || lvalue < ENE_NORMAL_RX_LOW);
-
-		if (tmp != dev->learning_enabled) {
-			spin_lock_irqsave(&dev->hw_lock, flags);
-			dev->learning_enabled = tmp;
-			ene_rx_set_inputs(dev);
-			spin_unlock_irqrestore(&dev->hw_lock, flags);
-		}
-		break;
-	case LIRC_SET_REC_TIMEOUT:
-		spin_lock_irqsave(&dev->hw_lock, flags);
-		dev->rx_timeout = lvalue;
-		spin_unlock_irqrestore(&dev->hw_lock, flags);
-		ene_dbg("RX: set rx report timeout to %d", dev->rx_timeout);
-		break;
-	case LIRC_SET_REC_TIMEOUT_REPORTS:
-		spin_lock_irqsave(&dev->hw_lock, flags);
-		dev->rx_send_timeout_packet = lvalue;
-		spin_unlock_irqrestore(&dev->hw_lock, flags);
-		ene_dbg("RX: %sable timeout reports",
-				dev->rx_send_timeout_packet ? "en" : "dis");
-		break;
-	case LIRC_SET_MEASURE_CARRIER_MODE:
-		if (dev->rx_carrier_sense == lvalue)
-			break;
-		spin_lock_irqsave(&dev->hw_lock, flags);
-		dev->rx_carrier_sense = lvalue;
-		ene_rx_set_inputs(dev);
-		spin_unlock_irqrestore(&dev->hw_lock, flags);
-		break;
-	case LIRC_GET_REC_RESOLUTION:
-		tmp = dev->rx_fan_input_inuse ?
-			ENE_SAMPLE_PERIOD_FAN : sample_period;
-		retval = put_user(tmp, (unsigned long *) arg);
-		break;
-	default:
-		retval = -ENOIOCTLCMD;
-		break;
+		period = 32; /* this is just a coincidence!!! */
 	}
+	ene_dbg("TX: set carrier to %d kHz", carrier);
 
-	return retval;
+	spin_lock_irqsave(&dev->hw_lock, flags);
+	dev->tx_period = period;
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+	return 0;
 }
 
-/* outside interface: transmit */
-static ssize_t ene_transmit(struct file *file, const char *buf,
-				  size_t n, loff_t *ppos)
+
+/* outside interface: enable learning mode */
+static int ene_set_learning_mode(void *data, int enable)
 {
-	struct ene_device *dev = lirc_get_pdata(file);
+	struct ene_device *dev = (struct ene_device *)data;
 	unsigned long flags;
+	if (enable == dev->learning_enabled)
+		return 0;
 
-	if (!dev)
-		return -EFAULT;
+	spin_lock_irqsave(&dev->hw_lock, flags);
+	dev->learning_enabled = enable;
+	ene_rx_set_inputs(dev);
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+	return 0;
+}
 
-	if (!dev->hw_learning_and_tx_capable)
-		return -ENODEV;
+/* outside interface: set rec carrier */
+static int ene_set_rec_carrier(void *data, u32 min, u32 max)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	ene_set_learning_mode(dev,
+		max > ENE_NORMAL_RX_HI || min < ENE_NORMAL_RX_LOW);
+	return 0;
+}
 
-	if (n % sizeof(int))
-		return -EINVAL;
+/* outside interface: enable or disable idle mode */
+static void ene_rx_set_idle(void *data, int idle)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	ene_dbg("%sabling idle mode", idle ? "en" : "dis");
 
-	if (n > ENE_TXBUF_SIZE * sizeof(int))
-		return -ENOMEM;
+	ene_hw_write_reg_mask(dev, ENE_CIR_SAMPLE_PERIOD,
+		(enable_idle && idle) ? 0 : ENE_CIR_SAMPLE_OVERFLOW,
+			ENE_CIR_SAMPLE_OVERFLOW);
+}
 
-	if (copy_from_user(dev->tx_buffer, buf, n))
-		return -EFAULT;
 
+/* outside interface: transmit */
+static int ene_transmit(void *data, int *buf, u32 n)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	unsigned long flags;
+
+	dev->tx_buffer = buf;
 	dev->tx_len = n / sizeof(int);
 	dev->tx_pos = 0;
 	dev->tx_reg = 0;
@@ -881,7 +751,7 @@ static ssize_t ene_transmit(struct file *file, const char *buf,
 
 	spin_lock_irqsave(&dev->hw_lock, flags);
 
-	ene_tx_set_transmiter_mask(dev);
+	ene_tx_hw_set_transmiter_mask(dev);
 	ene_tx_prepare(dev);
 
 	/* Transmit first two samples */
@@ -897,80 +767,35 @@ static ssize_t ene_transmit(struct file *file, const char *buf,
 		spin_unlock_irqrestore(&dev->hw_lock, flags);
 	} else
 		ene_dbg("TX: done");
-
 	return n;
 }
 
-/* Sends one sample to the user */
-static void ene_send_sample(struct ene_device *dev, unsigned long sample)
-{
-	if (!lirc_buffer_full(dev->lirc_driver->rbuf)) {
-		lirc_buffer_write(dev->lirc_driver->rbuf, (void *)&sample);
-		wake_up(&dev->lirc_driver->rbuf->wait_poll);
-	}
-}
-
-
-static const struct file_operations ene_fops = {
-	.owner		= THIS_MODULE,
-	.write		= ene_transmit,
-	.ioctl		= ene_ioctl,
-};
 
-/* main load function */
-static int ene_probe(struct pnp_dev *pnp_dev,
-		     const struct pnp_device_id *dev_id)
+/* probe entry */
+static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
 {
-	struct ene_device *dev;
-	struct lirc_driver *lirc_driver;
 	int error = -ENOMEM;
+	struct ir_dev_props *ir_props;
+	struct input_dev *input_dev;
+	struct ene_device *dev;
 
+	/* allocate memory */
+	input_dev = input_allocate_device();
+	ir_props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
 	dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL);
 
-	if (!dev)
-		goto err1;
-
-	dev->pnp_dev = pnp_dev;
-	pnp_set_drvdata(pnp_dev, dev);
-
-	/* prepare lirc interface */
-	error = -ENOMEM;
-	lirc_driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
-
-	if (!lirc_driver)
-		goto err2;
-
-	dev->lirc_driver = lirc_driver;
-
-	strcpy(lirc_driver->name, ENE_DRIVER_NAME);
-	lirc_driver->minor = -1;
-	lirc_driver->code_length = sizeof(int) * 8;
-	lirc_driver->features = LIRC_CAN_REC_MODE2 |
-				LIRC_CAN_GET_REC_RESOLUTION |
-				LIRC_CAN_SET_REC_TIMEOUT;
-	lirc_driver->data = dev;
-	lirc_driver->set_use_inc = ene_open;
-	lirc_driver->set_use_dec = ene_close;
-	lirc_driver->dev = &pnp_dev->dev;
-	lirc_driver->owner = THIS_MODULE;
-	lirc_driver->fops = &ene_fops;
-	lirc_driver->min_timeout = ENE_MINGAP;
-	lirc_driver->max_timeout = ENE_MAXGAP;
-	lirc_driver->rbuf = kzalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
-
-	if (!lirc_driver->rbuf)
-		goto err3;
-
-	if (lirc_buffer_init(lirc_driver->rbuf, sizeof(int), sizeof(int) * 512))
-		goto err4;
+	if (!input_dev || !ir_props || !dev)
+		goto error;
 
 	/* validate resources */
+	error = -ENODEV;
+
 	if (!pnp_port_valid(pnp_dev, 0) ||
 	    pnp_port_len(pnp_dev, 0) < ENE_MAX_IO)
-		goto err5;
+		goto error;
 
 	if (!pnp_irq_valid(pnp_dev, 0))
-		goto err5;
+		goto error;
 
 	dev->hw_io = pnp_port_start(pnp_dev, 0);
 	dev->irq = pnp_irq(pnp_dev, 0);
@@ -979,16 +804,19 @@ static int ene_probe(struct pnp_dev *pnp_dev,
 	/* claim the resources */
 	error = -EBUSY;
 	if (!request_region(dev->hw_io, ENE_MAX_IO, ENE_DRIVER_NAME))
-		goto err5;
+		goto error;
 
 	if (request_irq(dev->irq, ene_isr,
 			IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev))
-		goto err6;
+		goto error;
+
+	pnp_set_drvdata(pnp_dev, dev);
+	dev->pnp_dev = pnp_dev;
 
 	/* detect hardware version and features */
 	error = ene_hw_detect(dev);
 	if (error)
-		goto err7;
+		goto error;
 
 	ene_setup_settings(dev);
 
@@ -1000,19 +828,21 @@ static int ene_probe(struct pnp_dev *pnp_dev,
 			"Simulation of TX activated\n");
 	}
 
-	if (dev->hw_learning_and_tx_capable) {
-		lirc_driver->features |= LIRC_CAN_SEND_PULSE |
-					 LIRC_CAN_SET_SEND_CARRIER |
-					 LIRC_CAN_SET_TRANSMITTER_MASK;
+	ir_props->driver_type = RC_DRIVER_IR_RAW;
+	ir_props->allowed_protos = IR_TYPE_ALL;
+	ir_props->priv = dev;
+	ir_props->open = ene_open;
+	ir_props->close = ene_close;
+	ir_props->min_timeout = ENE_MINGAP * 1000;
+	ir_props->max_timeout = ENE_MAXGAP * 1000;
+	ir_props->timeout = ENE_MAXGAP * 1000;
 
-		if (enable_duty_carrier)
-			lirc_driver->features |= LIRC_CAN_SET_SEND_DUTY_CYCLE;
+	if (dev->hw_revision == ENE_HW_B)
+		ir_props->s_idle = ene_rx_set_idle;
 
-		if (input == 0)
-			lirc_driver->features |= LIRC_CAN_SET_REC_CARRIER;
 
-		init_completion(&dev->tx_complete);
-	}
+	dev->props = ir_props;
+	dev->idev = input_dev;
 
 	/* don't allow too short/long sample periods */
 	if (sample_period < 5 || sample_period > 0x7F)
@@ -1029,29 +859,50 @@ static int ene_probe(struct pnp_dev *pnp_dev,
 			sample_period = 75;
 	}
 
+	ir_props->rx_resolution = sample_period * 1000;
+
+	if (dev->hw_learning_and_tx_capable) {
+
+		ir_props->s_learning_mode = ene_set_learning_mode;
+
+		if (input == 0)
+			ir_props->s_rx_carrier_range = ene_set_rec_carrier;
+
+		init_completion(&dev->tx_complete);
+		ir_props->tx_ir = ene_transmit;
+		ir_props->s_tx_mask = ene_set_tx_mask;
+		ir_props->s_tx_carrier = ene_set_tx_carrier;
+		ir_props->tx_resolution = ENE_TX_SMPL_PERIOD * 1000;
+		/* ir_props->s_carrier_report = ene_set_carrier_report; */
+	}
+
+
 	device_set_wakeup_capable(&pnp_dev->dev, 1);
 	device_set_wakeup_enable(&pnp_dev->dev, 1);
 
+	if (dev->hw_learning_and_tx_capable)
+		input_dev->name = "ENE eHome Infrared Remote Transceiver";
+	else
+		input_dev->name = "ENE eHome Infrared Remote Receiver";
+
+
 	error = -ENODEV;
-	if (lirc_register_driver(lirc_driver))
-		goto err7;
+	if (ir_input_register(input_dev, RC_MAP_RC6_MCE, ir_props,
+							ENE_DRIVER_NAME))
+		goto error;
+
 
 	ene_printk(KERN_NOTICE, "driver has been succesfully loaded\n");
 	return 0;
-
-err7:
-	free_irq(dev->irq, dev);
-err6:
-	release_region(dev->hw_io, ENE_MAX_IO);
-err5:
-	lirc_buffer_free(lirc_driver->rbuf);
-err4:
-	kfree(lirc_driver->rbuf);
-err3:
-	kfree(lirc_driver);
-err2:
+error:
+	if (dev->irq)
+		free_irq(dev->irq, dev);
+	if (dev->hw_io)
+		release_region(dev->hw_io, ENE_MAX_IO);
+
+	input_free_device(input_dev);
+	kfree(ir_props);
 	kfree(dev);
-err1:
 	return error;
 }
 
@@ -1067,9 +918,8 @@ static void ene_remove(struct pnp_dev *pnp_dev)
 
 	free_irq(dev->irq, dev);
 	release_region(dev->hw_io, ENE_MAX_IO);
-	lirc_unregister_driver(dev->lirc_driver->minor);
-	lirc_buffer_free(dev->lirc_driver->rbuf);
-	kfree(dev->lirc_driver);
+	ir_input_unregister(dev->idev);
+	kfree(dev->props);
 	kfree(dev);
 }
 
@@ -1113,6 +963,7 @@ static const struct pnp_device_id ene_ids[] = {
 	{.id = "ENE0100",},
 	{.id = "ENE0200",},
 	{.id = "ENE0201",},
+	{.id = "ENE0202",},
 	{},
 };
 
@@ -1160,13 +1011,9 @@ module_param(txsim, bool, S_IRUGO);
 MODULE_PARM_DESC(txsim,
 	"Simulate TX features on unsupported hardware (dangerous)");
 
-module_param(enable_duty_carrier, bool, S_IRUGO);
-MODULE_PARM_DESC(enable_duty_carrier,
-	"Enable a code that might allow to to set TX carrier duty cycle");
-
 MODULE_DEVICE_TABLE(pnp, ene_ids);
 MODULE_DESCRIPTION
-	("LIRC driver for KB3926B/KB3926C/KB3926D "
+	("Infrared input driver for KB3926B/KB3926C/KB3926D "
 	"(aka ENE0100/ENE0200/ENE0201) CIR port");
 
 MODULE_AUTHOR("Maxim Levitsky");
diff --git a/drivers/media/IR/ene_ir.h b/drivers/media/IR/ene_ir.h
index 06453a8..54c76af 100644
--- a/drivers/media/IR/ene_ir.h
+++ b/drivers/media/IR/ene_ir.h
@@ -1,5 +1,5 @@
 /*
- * driver for ENE KB3926 B/C/D CIR (also known as ENE0100/ENE0200/ENE0201)
+ * driver for ENE KB3926 B/C/D CIR (also known as ENE0XXX)
  *
  * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
  *
@@ -19,8 +19,7 @@
  * USA
  */
 #include <linux/spinlock.h>
-#include <media/lirc.h>
-#include <media/lirc_dev.h>
+
 
 /* hardware address */
 #define ENE_STATUS		0	/* hardware status - unused */
@@ -62,7 +61,7 @@
 /* transmitter ports */
 #define ENE_TX_PORT2		0xFC01	/* this enables one or both */
 #define ENE_TX_PORT2_EN		0x20	/* TX ports */
-#define ENE_TX_PORT1		0xFC08	
+#define ENE_TX_PORT1		0xFC08
 #define ENE_TX_PORT1_EN		0x02
 
 /* IRQ registers block (for revision B) */
@@ -88,7 +87,7 @@
 #define ENE_CIR_CONF1		0xFEC0
 #define ENE_CIR_CONF1_TX_CLEAR	0x01	/* clear that on revC */
 					/* while transmitting */
-#define ENE_CIR_CONF1_RX_ON	0x07	/* normal reciever enabled */
+#define ENE_CIR_CONF1_RX_ON	0x07	/* normal receiver enabled */
 #define ENE_CIR_CONF1_LEARN1	0x08	/* enabled on learning mode */
 #define ENE_CIR_CONF1_TX_ON	0x30	/* enabled on transmit */
 #define ENE_CIR_CONF1_TX_CARR	0x80	/* send TX carrier or not */
@@ -112,7 +111,7 @@
 /* Unknown TX setting - TX sample period ??? */
 #define ENE_TX_UNK1		0xFECB	/* set to 0x63 */
 
-/* Current recieved carrier period */
+/* Current received carrier period */
 #define ENE_RX_CARRIER		0xFECC	/* RX period (500 ns) */
 #define ENE_RX_CARRIER_VALID	0x80	/* Register content valid */
 
@@ -124,6 +123,9 @@
 
 /* Hardware versions */
 #define ENE_HW_VERSION		0xFF00	/* hardware revision */
+#define ENE_PLLFRH		0xFF16
+#define ENE_PLLFRL		0xFF17
+
 #define ENE_HW_UNK		0xFF1D
 #define ENE_HW_UNK_CLR		0x04
 #define ENE_HW_VER_MAJOR	0xFF1E	/* chip version */
@@ -162,8 +164,7 @@
 
 /******************************************************************************/
 
-#define ENE_DRIVER_NAME		"enecir"
-#define ENE_TXBUF_SIZE (500 * sizeof(int))	/* 500 samples (arbitary) */
+#define ENE_DRIVER_NAME		"ene_ir"
 
 #define ENE_IRQ_RX		1
 #define ENE_IRQ_TX		2
@@ -188,7 +189,8 @@
 
 struct ene_device {
 	struct pnp_dev *pnp_dev;
-	struct lirc_driver *lirc_driver;
+	struct input_dev *idev;
+	struct ir_dev_props *props;
 	int in_use;
 
 	/* hw IO settings */
@@ -198,43 +200,36 @@ struct ene_device {
 
 	/* HW features */
 	int hw_revision;			/* hardware revision */
-	int hw_learning_and_tx_capable;		/* learning capable */
-	int hw_gpio40_learning;			/* gpio40 is learning */
-	int hw_fan_as_normal_input;		/* fan input is used as */
+	bool hw_learning_and_tx_capable;	/* learning capable */
+	bool hw_gpio40_learning;		/* gpio40 is learning */
+	bool hw_fan_as_normal_input;		/* fan input is used as */
 						/* regular input */
 	/* HW state*/
 	int rx_pointer;				/* hw pointer to rx buffer */
-	int rx_fan_input_inuse;			/* is fan input in use for rx*/
+	bool rx_fan_input_inuse;		/* is fan input in use for rx*/
 	int tx_reg;				/* current reg used for TX */
 	u8  saved_conf1;			/* saved FEC0 reg */
-	int learning_enabled;			/* learning input enabled */
-
-	/* RX sample handling */
-	int rx_sample;				/* current recieved sample */
-	int rx_sample_pulse;			/* recieved sample is pulse */
-	int rx_idle;				/* idle mode for RX activated */
-	struct timeval rx_gap_start;		/* time of start of idle */
-	int rx_timeout;				/* time in ms of RX timeout */
-	int rx_send_timeout_packet;		/* do we send RX timeout */
-	int rx_timeout_sent;			/* we sent the timeout packet */
-	int rx_carrier_sense;			/* sense carrier */
 
 	/* TX sample handling */
 	unsigned int tx_sample;			/* current sample for TX */
-	int tx_sample_pulse;			/* current sample is pulse */
+	bool tx_sample_pulse;			/* current sample is pulse */
 
 	/* TX buffer */
-	int tx_buffer[ENE_TXBUF_SIZE];		/* input samples buffer*/
+	int *tx_buffer;				/* input samples buffer*/
 	int tx_pos;				/* position in that bufer */
 	int tx_len;				/* current len of tx buffer */
-	int tx_underway;			/* TX is under way*/
 	int tx_done;				/* done transmitting */
 						/* one more sample pending*/
 	struct completion tx_complete;		/* TX completion */
 	struct timer_list tx_sim_timer;
 
-	/*TX settings */
+	/* TX settings */
 	int tx_period;
 	int tx_duty_cycle;
 	int transmitter_mask;
+
+	/* RX settings */
+	bool learning_enabled;			/* learning input enabled */
+	bool carrier_detect_enabled;		/* carrier detect enabled */
+	int rx_period_adjust;
 };
-- 
1.7.0.4

Re: [PATCH 0/9 v3] IR: few fixes, additions and ENE driver

[Mauro Carvalho Chehab]

Em 30-07-2010 08:38, Maxim Levitsky escreveu:
> Hi,
> 
> This is mostly same patchset.
> 
> I addressed the comments of Andy Walls.
> 
> Now IR decoding is done by a separate thread, and this fixes
> the race, and unnesesary performance loss due to it.
> 
> Best regards,
> 	Maxim Levitsky
> 

Hmm... some change at this changeset is trying to divide a 64 bits integer
at the LIRC driver. This is causing the following error:

Jul 30 16:45:23 agua kernel: [23834.179871] lirc_dev: IR Remote Control driver registered, major 251 
Jul 30 16:45:23 agua kernel: [23834.181884] ir_lirc_codec: Unknown symbol __udivdi3 (err 0)

you should, instead use do_div for doing that. Another fix would be to define the timeout
constants as int or u32.

Cheers,
Mauro

Re: [PATCH 0/9 v3] IR: few fixes, additions and ENE driver

[Maxim Levitsky]

On Fri, 2010-07-30 at 16:33 -0300, Mauro Carvalho Chehab wrote: 
> Em 30-07-2010 08:38, Maxim Levitsky escreveu:
> > Hi,
> > 
> > This is mostly same patchset.
> > 
> > I addressed the comments of Andy Walls.
> > 
> > Now IR decoding is done by a separate thread, and this fixes
> > the race, and unnesesary performance loss due to it.
> > 
> > Best regards,
> > 	Maxim Levitsky
> > 
> 
> Hmm... some change at this changeset is trying to divide a 64 bits integer
> at the LIRC driver. This is causing the following error:
> 
> Jul 30 16:45:23 agua kernel: [23834.179871] lirc_dev: IR Remote Control driver registered, major 251 
> Jul 30 16:45:23 agua kernel: [23834.181884] ir_lirc_codec: Unknown symbol __udivdi3 (err 0)
> 
> you should, instead use do_div for doing that. Another fix would be to define the timeout
> constants as int or u32.
I know about that, but forgot, sorry.

Sure, will do.

Best regards,
Maxim Levitsky