From: Maxim Levitsky <maximlevitsky@gmail.com>
To: lirc-list@lists.sourceforge.net
Cc: Jarod Wilson <jarod@wilsonet.com>,
linux-input@vger.kernel.org, linux-media@vger.kernel.org,
Mauro Carvalho Chehab <mchehab@redhat.com>,
Christoph Bartelmus <lirc@bartelmus.de>,
Maxim Levitsky <maximlevitsky@gmail.com>
Subject: [PATCH 09/13] IR: add helper function for hardware with small o/b buffer.
Date: Fri, 30 Jul 2010 14:38:49 +0300 [thread overview]
Message-ID: <1280489933-20865-10-git-send-email-maximlevitsky@gmail.com> (raw)
In-Reply-To: <1280489933-20865-1-git-send-email-maximlevitsky@gmail.com>
Some ir input devices have small buffer, and interrupt the host
each time it is full (or half full)
Add a helper that automaticly handles timeouts, and also
automaticly merges samples of same time (space-space)
Such samples might be placed by hardware because size of
sample in the buffer is small (a byte for example).
Also remove constness from ir_dev_props, because it now contains timeout
settings that driver might want to change
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
---
drivers/media/IR/ir-core-priv.h | 1 +
drivers/media/IR/ir-keytable.c | 2 +-
drivers/media/IR/ir-raw-event.c | 84 +++++++++++++++++++++++++++++++++++++++
include/media/ir-core.h | 23 +++++++++-
4 files changed, 106 insertions(+), 4 deletions(-)
diff --git a/drivers/media/IR/ir-core-priv.h b/drivers/media/IR/ir-core-priv.h
index e9c3cce..30ff52c 100644
--- a/drivers/media/IR/ir-core-priv.h
+++ b/drivers/media/IR/ir-core-priv.h
@@ -41,6 +41,7 @@ struct ir_raw_event_ctrl {
/* raw decoder state follows */
struct ir_raw_event prev_ev;
+ struct ir_raw_event this_ev;
struct nec_dec {
int state;
unsigned count;
diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
index 94a8577..34b9c07 100644
--- a/drivers/media/IR/ir-keytable.c
+++ b/drivers/media/IR/ir-keytable.c
@@ -428,7 +428,7 @@ static void ir_close(struct input_dev *input_dev)
*/
int __ir_input_register(struct input_dev *input_dev,
const struct ir_scancode_table *rc_tab,
- const struct ir_dev_props *props,
+ struct ir_dev_props *props,
const char *driver_name)
{
struct ir_input_dev *ir_dev;
diff --git a/drivers/media/IR/ir-raw-event.c b/drivers/media/IR/ir-raw-event.c
index d0c18db..43094e7 100644
--- a/drivers/media/IR/ir-raw-event.c
+++ b/drivers/media/IR/ir-raw-event.c
@@ -140,6 +140,90 @@ int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type typ
EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
/**
+ * ir_raw_event_store_with_filter() - pass next pulse/space to decoders with some processing
+ * @input_dev: the struct input_dev device descriptor
+ * @type: the type of the event that has occurred
+ *
+ * This routine (which may be called from an interrupt context) works
+ * in similiar manner to ir_raw_event_store_edge.
+ * This routine is intended for devices with limited internal buffer
+ * It automerges samples of same type, and handles timeouts
+ */
+int ir_raw_event_store_with_filter(struct input_dev *input_dev,
+ struct ir_raw_event *ev)
+{
+ struct ir_input_dev *ir = input_get_drvdata(input_dev);
+ struct ir_raw_event_ctrl *raw = ir->raw;
+
+ if (!raw || !ir->props)
+ return -EINVAL;
+
+ /* Ignore spaces in idle mode */
+ if (ir->idle && !ev->pulse)
+ return 0;
+ else if (ir->idle)
+ ir_raw_event_set_idle(input_dev, 0);
+
+ if (!raw->this_ev.duration) {
+ raw->this_ev = *ev;
+ } else if (ev->pulse == raw->this_ev.pulse) {
+ raw->this_ev.duration += ev->duration;
+ } else {
+ ir_raw_event_store(input_dev, &raw->this_ev);
+ raw->this_ev = *ev;
+ }
+
+ /* Enter idle mode if nessesary */
+ if (!ev->pulse && ir->props->timeout &&
+ raw->this_ev.duration >= ir->props->timeout)
+ ir_raw_event_set_idle(input_dev, 1);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_store_with_filter);
+
+void ir_raw_event_set_idle(struct input_dev *input_dev, int idle)
+{
+ struct ir_input_dev *ir = input_get_drvdata(input_dev);
+ struct ir_raw_event_ctrl *raw = ir->raw;
+ ktime_t now;
+ u64 delta;
+
+ if (!ir->props)
+ return;
+
+ if (!ir->raw)
+ goto out;
+
+ if (idle) {
+ IR_dprintk(2, "enter idle mode\n");
+ raw->last_event = ktime_get();
+ } else {
+ IR_dprintk(2, "exit idle mode\n");
+
+ now = ktime_get();
+ delta = ktime_to_ns(ktime_sub(now, ir->raw->last_event));
+
+ WARN_ON(raw->this_ev.pulse);
+
+ raw->this_ev.duration =
+ min(raw->this_ev.duration + delta,
+ (u64)IR_MAX_DURATION);
+
+ ir_raw_event_store(input_dev, &raw->this_ev);
+
+ if (raw->this_ev.duration == IR_MAX_DURATION)
+ ir_raw_event_reset(input_dev);
+
+ raw->this_ev.duration = 0;
+ }
+out:
+ if (ir->props->s_idle)
+ ir->props->s_idle(ir->props->priv, idle);
+ ir->idle = idle;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_set_idle);
+
+/**
* ir_raw_event_handle() - schedules the decoding of stored ir data
* @input_dev: the struct input_dev device descriptor
*
diff --git a/include/media/ir-core.h b/include/media/ir-core.h
index 197d05a..7ad39fe 100644
--- a/include/media/ir-core.h
+++ b/include/media/ir-core.h
@@ -41,6 +41,9 @@ enum rc_driver_type {
* anything with it. Yet, as the same keycode table can be used with other
* devices, a mask is provided to allow its usage. Drivers should generally
* leave this field in blank
+ * @timeout: optional time after which device stops sending data
+ * @min_timeout: minimum timeout supported by device
+ * @max_timeout: maximum timeout supported by device
* @priv: driver-specific data, to be used on the callbacks
* @change_protocol: allow changing the protocol used on hardware decoders
* @open: callback to allow drivers to enable polling/irq when IR input device
@@ -50,11 +53,19 @@ enum rc_driver_type {
* @s_tx_mask: set transmitter mask (for devices with multiple tx outputs)
* @s_tx_carrier: set transmit carrier frequency
* @tx_ir: transmit IR
+ * @s_idle: optional: enable/disable hardware idle mode, upon which,
+ * device doesn't interrupt host untill it sees IR data
*/
struct ir_dev_props {
enum rc_driver_type driver_type;
unsigned long allowed_protos;
u32 scanmask;
+
+ u64 timeout;
+ u64 min_timeout;
+ u64 max_timeout;
+
+
void *priv;
int (*change_protocol)(void *priv, u64 ir_type);
int (*open)(void *priv);
@@ -62,6 +73,7 @@ struct ir_dev_props {
int (*s_tx_mask)(void *priv, u32 mask);
int (*s_tx_carrier)(void *priv, u32 carrier);
int (*tx_ir)(void *priv, int *txbuf, u32 n);
+ void (*s_idle)(void *priv, int enable);
};
struct ir_input_dev {
@@ -69,9 +81,10 @@ struct ir_input_dev {
char *driver_name; /* Name of the driver module */
struct ir_scancode_table rc_tab; /* scan/key table */
unsigned long devno; /* device number */
- const struct ir_dev_props *props; /* Device properties */
+ struct ir_dev_props *props; /* Device properties */
struct ir_raw_event_ctrl *raw; /* for raw pulse/space events */
struct input_dev *input_dev; /* the input device associated with this device */
+ bool idle;
/* key info - needed by IR keycode handlers */
spinlock_t keylock; /* protects the below members */
@@ -95,12 +108,12 @@ enum raw_event_type {
/* From ir-keytable.c */
int __ir_input_register(struct input_dev *dev,
const struct ir_scancode_table *ir_codes,
- const struct ir_dev_props *props,
+ struct ir_dev_props *props,
const char *driver_name);
static inline int ir_input_register(struct input_dev *dev,
const char *map_name,
- const struct ir_dev_props *props,
+ struct ir_dev_props *props,
const char *driver_name) {
struct ir_scancode_table *ir_codes;
struct ir_input_dev *ir_dev;
@@ -148,6 +161,10 @@ struct ir_raw_event {
void ir_raw_event_handle(struct input_dev *input_dev);
int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev);
int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type);
+int ir_raw_event_store_with_filter(struct input_dev *input_dev,
+ struct ir_raw_event *ev);
+void ir_raw_event_set_idle(struct input_dev *input_dev, int idle);
+
static inline void ir_raw_event_reset(struct input_dev *input_dev)
{
struct ir_raw_event ev = { .pulse = false, .duration = 0 };
--
1.7.0.4
next prev parent reply other threads:[~2010-07-30 11:39 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-30 11:38 [PATCH 0/9 v3] IR: few fixes, additions and ENE driver Maxim Levitsky
2010-07-30 11:38 ` [PATCH 01/13] IR: Kconfig fixes Maxim Levitsky
2010-07-30 11:38 ` [PATCH 02/13] IR: minor fixes: Maxim Levitsky
2010-07-30 11:38 ` [PATCH 03/13] IR: replace spinlock with mutex Maxim Levitsky
2010-07-30 11:38 ` [PATCH 04/13] IR: fix locking in ir_raw_event_work Maxim Levitsky
2010-07-30 11:38 ` [PATCH 05/13] IR: JVC: make repeat work Maxim Levitsky
2010-07-30 11:38 ` [PATCH 06/13] IR: nec decoder: fix repeat Maxim Levitsky
2010-07-30 19:36 ` Mauro Carvalho Chehab
2010-07-30 19:54 ` Maxim Levitsky
2010-07-30 11:38 ` [PATCH 07/13] IR: NECX: support repeat Maxim Levitsky
2010-07-30 11:38 ` [PATCH 08/13] IR: Allow not to compile keymaps in Maxim Levitsky
2010-07-30 11:38 ` Maxim Levitsky [this message]
2010-07-30 11:38 ` [PATCH 10/13] IR: extend interfaces to support more device settings LIRC: add new IOCTL that enables learning mode (wide band receiver) Maxim Levitsky
2010-07-30 21:22 ` Christoph Bartelmus
2010-07-30 22:01 ` Maxim Levitsky
2010-07-31 8:10 ` Christoph Bartelmus
2010-07-31 9:35 ` Maxim Levitsky
2010-07-30 11:38 ` [PATCH 11/13] IR: report unknown scancodes the in-kernel decoders found Maxim Levitsky
2010-07-30 11:38 ` [PATCH 12/13] STAGING: remove lirc_ene0100 driver Maxim Levitsky
2010-07-30 11:38 ` [PATCH 13/13] IR: Port ene driver to new IR subsystem and enable it Maxim Levitsky
2010-07-30 19:33 ` [PATCH 0/9 v3] IR: few fixes, additions and ENE driver Mauro Carvalho Chehab
2010-07-30 19:52 ` Maxim Levitsky
-- strict thread matches above, loose matches on Subject: below --
2010-07-31 14:59 [PATCH 0/9 v4] " Maxim Levitsky
2010-07-31 14:59 ` [PATCH 09/13] IR: add helper function for hardware with small o/b buffer Maxim Levitsky
2010-08-02 2:11 ` Andy Walls
2010-08-02 10:49 ` Maxim Levitsky
2010-08-02 15:54 ` Jarod Wilson
2010-07-30 2:17 [PATCH 0/9 v2] IR: few fixes, additions and ENE driver Maxim Levitsky
2010-07-30 2:17 ` [PATCH 09/13] IR: add helper function for hardware with small o/b buffer Maxim Levitsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1280489933-20865-10-git-send-email-maximlevitsky@gmail.com \
--to=maximlevitsky@gmail.com \
--cc=jarod@wilsonet.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=lirc-list@lists.sourceforge.net \
--cc=lirc@bartelmus.de \
--cc=mchehab@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).