* XPad driver, unrecognized controller
@ 2010-08-08 23:04 tsuraan
2010-08-09 12:38 ` Christoph Fritz
0 siblings, 1 reply; 6+ messages in thread
From: tsuraan @ 2010-08-08 23:04 UTC (permalink / raw)
To: linux-input
I have a standard XBox360 wireless controller (two that came with
XBoxes, a few that didn't). All of them have this info from
usb/devices:
T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=04 Dev#= 21 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= 1
P: Vendor=045e ProdID=028f Rev= 1.09
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=5d Prot=ff Driver=(none)
Although the P: Rev line varies from 1.05 to 2.04. None of these
controllers are detected by the xpad driver when plugged into my
computer through the standard USB charging cable. I've tried adding
the vendor/prodid to the xpad_device array, but it didn't help at all.
I've also noticed that none of these controllers show a manufacturer,
nor any other things that USB devices normally show. Do you have any
advice on how to get a standard xbox controller to work under Linux? I
have a cheapo MadCatz device that does work, so I know that much is
functional, anyhow.
I'm running 2.6.35, amd64.
Thanks for any help you can give.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: XPad driver, unrecognized controller
2010-08-08 23:04 XPad driver, unrecognized controller tsuraan
@ 2010-08-09 12:38 ` Christoph Fritz
2010-08-09 13:54 ` tsuraan
0 siblings, 1 reply; 6+ messages in thread
From: Christoph Fritz @ 2010-08-09 12:38 UTC (permalink / raw)
To: tsuraan; +Cc: linux-input
On Sun, 2010-08-08 at 18:04 -0500, tsuraan wrote:
> I have a standard XBox360 wireless controller (two that came with
> XBoxes, a few that didn't). All of them have this info from
> usb/devices:
>
> T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=04 Dev#= 21 Spd=12 MxCh= 0
> D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= 1
> P: Vendor=045e ProdID=028f Rev= 1.09
> C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
> I:* If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=5d Prot=ff Driver=(none)
>
> Although the P: Rev line varies from 1.05 to 2.04. None of these
> controllers are detected by the xpad driver when plugged into my
> computer through the standard USB charging cable. I've tried adding
> the vendor/prodid to the xpad_device array, but it didn't help at all.
> I've also noticed that none of these controllers show a manufacturer,
> nor any other things that USB devices normally show. Do you have any
> advice on how to get a standard xbox controller to work under Linux? I
> have a cheapo MadCatz device that does work, so I know that much is
> functional, anyhow.
>
> I'm running 2.6.35, amd64.
>
> Thanks for any help you can give.
What does lsusb -v tells about your device?
thanks,
chf
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: XPad driver, unrecognized controller
2010-08-09 12:38 ` Christoph Fritz
@ 2010-08-09 13:54 ` tsuraan
2010-08-09 16:10 ` Christoph Fritz
0 siblings, 1 reply; 6+ messages in thread
From: tsuraan @ 2010-08-09 13:54 UTC (permalink / raw)
To: Christoph Fritz; +Cc: linux-input
> What does lsusb -v tells about your device?
It gives me this:
Bus 002 Device 023: ID 045e:028f Microsoft Corp. Xbox360 Wireless Controller
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 8
idVendor 0x045e Microsoft Corp.
idProduct 0x028f Xbox360 Wireless Controller
bcdDevice 1.05
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 18
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 93
bInterfaceProtocol 255
iInterface 0
Device Status: 0x0000
(Bus Powered)
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: XPad driver, unrecognized controller
2010-08-09 13:54 ` tsuraan
@ 2010-08-09 16:10 ` Christoph Fritz
2010-08-09 22:43 ` tsuraan
0 siblings, 1 reply; 6+ messages in thread
From: Christoph Fritz @ 2010-08-09 16:10 UTC (permalink / raw)
To: tsuraan; +Cc: linux-input
On Mon, 2010-08-09 at 08:54 -0500, tsuraan wrote:
> > What does lsusb -v tells about your device?
>
> It gives me this:
>
> Bus 002 Device 023: ID 045e:028f Microsoft Corp. Xbox360 Wireless Controller
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 255 Vendor Specific Class
> bDeviceSubClass 255 Vendor Specific Subclass
> bDeviceProtocol 255 Vendor Specific Protocol
> bMaxPacketSize0 8
> idVendor 0x045e Microsoft Corp.
> idProduct 0x028f Xbox360 Wireless Controller
> bcdDevice 1.05
> iManufacturer 0
> iProduct 0
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 18
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xa0
> (Bus Powered)
> Remote Wakeup
> MaxPower 100mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 0
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 93
> bInterfaceProtocol 255
> iInterface 0
> Device Status: 0x0000
> (Bus Powered)
I was told that you can't use a Xbox360 Wireless Controller with a
Play&Charge cable plugged into your host. You need the Wireless
Receiver.
thanks,
chf
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: XPad driver, unrecognized controller
2010-08-09 16:10 ` Christoph Fritz
@ 2010-08-09 22:43 ` tsuraan
2010-08-09 22:59 ` Christoph Fritz
0 siblings, 1 reply; 6+ messages in thread
From: tsuraan @ 2010-08-09 22:43 UTC (permalink / raw)
To: Christoph Fritz; +Cc: linux-input
> I was told that you can't use a Xbox360 Wireless Controller with a
> Play&Charge cable plugged into your host. You need the Wireless
> Receiver.
That's weird. Does the 360 controller always use wireless mode with
the XBox, even when plugged in?
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: XPad driver, unrecognized controller
2010-08-09 22:43 ` tsuraan
@ 2010-08-09 22:59 ` Christoph Fritz
0 siblings, 0 replies; 6+ messages in thread
From: Christoph Fritz @ 2010-08-09 22:59 UTC (permalink / raw)
To: tsuraan; +Cc: linux-input
On Mon, Aug 09, 2010 at 05:43:09PM -0500, tsuraan wrote:
> > I was told that you can't use a Xbox360 Wireless Controller with a
> > Play&Charge cable plugged into your host. You need the Wireless
> > Receiver.
>
> That's weird. Does the 360 controller always use wireless mode with
> the XBox, even when plugged in?
It just seems so, yes.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2010-08-09 22:56 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-08-08 23:04 XPad driver, unrecognized controller tsuraan
2010-08-09 12:38 ` Christoph Fritz
2010-08-09 13:54 ` tsuraan
2010-08-09 16:10 ` Christoph Fritz
2010-08-09 22:43 ` tsuraan
2010-08-09 22:59 ` Christoph Fritz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).