linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>
To: Thierry Reding <thierry.reding@avionic-design.de>,
	linux-kernel@vger.kernel.org,
	Sascha Hauer <kernel@pengutronix.de>,
	linux-arm-kernel@lists.infradead.org
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	linux-input@vger.kernel.org, Bryan Wu <bryan.wu@canonical.com>,
	Richard Purdie <rpurdie@rpsys.net>,
	linux-leds@vger.kernel.org,
	Florian Tobias Schandinat <FlorianSchandinat@gmx.de>,
	linux-fbdev@vger.kernel.org, Lars-Peter Clausen <lars@metafoo.de>
Subject: [PATCH] pwm-imx: Fix config / enable / disable
Date: Thu, 23 Aug 2012 23:03:57 +0200 (CEST)	[thread overview]
Message-ID: <1305545087.2775440.1345755837651.JavaMail.root@advansee.com> (raw)
In-Reply-To: <20120823191108.GB8127@avionic-0098.mockup.avionic-design.de>

imx_pwm_config() did not enable the PWM IP clock while accessing the registers.
Hence, a call to pwm_config() had no effect before pwm_enable() had been called,
which does not comply to the PWM API.

Moreover, calling pwm_disable() then pwm_enable() must be a transparent
operation.

This fixes the first setting of brightness through sysfs that had no effect with
leds-pwm.

Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: <linux-kernel@vger.kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
---
 .../drivers/pwm/pwm-imx.c                          |   55 +++++++++++++++-----
 1 file changed, 43 insertions(+), 12 deletions(-)

diff --git linux-next-c94456b.orig/drivers/pwm/pwm-imx.c linux-next-c94456b/drivers/pwm/pwm-imx.c
index 2a0b353..0519bf2 100644
--- linux-next-c94456b.orig/drivers/pwm/pwm-imx.c
+++ linux-next-c94456b/drivers/pwm/pwm-imx.c
@@ -55,6 +55,16 @@ static int imx_pwm_config(struct pwm_chip *chip,
 {
 	struct imx_chip *imx = to_imx_chip(chip);
 
+	/*
+	 * If the PWM is disabled, make sure to turn on the clock before
+	 * accessing the registers.
+	 */
+	if (!imx->clk_enabled) {
+		int rc = clk_prepare_enable(imx->clk);
+		if (rc)
+			return rc;
+	}
+
 	if (!(cpu_is_mx1() || cpu_is_mx21())) {
 		unsigned long long c;
 		unsigned long period_cycles, duty_cycles, prescale;
@@ -85,8 +95,11 @@ static int imx_pwm_config(struct pwm_chip *chip,
 		writel(period_cycles, imx->mmio_base + MX3_PWMPR);
 
 		cr = MX3_PWMCR_PRESCALER(prescale) |
-			MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
-			MX3_PWMCR_DBGEN | MX3_PWMCR_EN;
+			MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN | MX3_PWMCR_DBGEN;
+
+		/* If the PWM is enabled, keep it so. */
+		if (imx->clk_enabled)
+			cr |= MX3_PWMCR_EN;
 
 		if (cpu_is_mx25())
 			cr |= MX3_PWMCR_CLKSRC_IPG;
@@ -118,32 +131,50 @@ static int imx_pwm_config(struct pwm_chip *chip,
 		BUG();
 	}
 
+	/* If the PWM is disabled, turn the clock off again to save power. */
+	if (!imx->clk_enabled)
+		clk_disable_unprepare(imx->clk);
+
 	return 0;
 }
 
 static int imx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct imx_chip *imx = to_imx_chip(chip);
-	int rc = 0;
+	int rc;
 
-	if (!imx->clk_enabled) {
-		rc = clk_prepare_enable(imx->clk);
-		if (!rc)
-			imx->clk_enabled = 1;
+	if (imx->clk_enabled)
+		return 0;
+
+	rc = clk_prepare_enable(imx->clk);
+	if (rc)
+		return rc;
+
+	if (!(cpu_is_mx1() || cpu_is_mx21())) {
+		u32 cr = readl(imx->mmio_base + MX3_PWMCR);
+		cr |= MX3_PWMCR_EN;
+		writel(cr, imx->mmio_base + MX3_PWMCR);
 	}
-	return rc;
+
+	imx->clk_enabled = 1;
+	return 0;
 }
 
 static void imx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct imx_chip *imx = to_imx_chip(chip);
 
-	writel(0, imx->mmio_base + MX3_PWMCR);
+	if (!imx->clk_enabled)
+		return;
 
-	if (imx->clk_enabled) {
-		clk_disable_unprepare(imx->clk);
-		imx->clk_enabled = 0;
+	if (!(cpu_is_mx1() || cpu_is_mx21())) {
+		u32 cr = readl(imx->mmio_base + MX3_PWMCR);
+		cr &= ~MX3_PWMCR_EN;
+		writel(cr, imx->mmio_base + MX3_PWMCR);
 	}
+
+	clk_disable_unprepare(imx->clk);
+	imx->clk_enabled = 0;
 }
 
 static struct pwm_ops imx_pwm_ops = {
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2012-08-23 20:58 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <320569847.2756382.1345729013971.JavaMail.root@advansee.com>
2012-08-23 14:19 ` [PATCH] pwm: Call pwm_enable() before pwm_config() Benoît Thébaudeau
2012-08-23 15:43   ` Lars-Peter Clausen
2012-08-23 16:57     ` Benoît Thébaudeau
2012-08-23 17:12       ` Lars-Peter Clausen
2012-08-23 17:19         ` Lars-Peter Clausen
2012-08-23 19:04           ` Thierry Reding
2012-09-20 19:05             ` Mark Brown
2012-08-23 19:11         ` Thierry Reding
2012-08-23 21:03           ` Benoît Thébaudeau [this message]
2012-08-28  7:37             ` [PATCH] pwm-imx: Fix config / enable / disable Sascha Hauer
2012-09-20 19:03         ` [PATCH] pwm: Call pwm_enable() before pwm_config() Mark Brown
2012-08-30  7:10     ` Jingoo Han

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1305545087.2775440.1345755837651.JavaMail.root@advansee.com \
    --to=benoit.thebaudeau@advansee.com \
    --cc=FlorianSchandinat@gmx.de \
    --cc=bryan.wu@canonical.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=lars@metafoo.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=rpurdie@rpsys.net \
    --cc=thierry.reding@avionic-design.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).