From mboxrd@z Thu Jan 1 00:00:00 1970 From: Eric Andersson Subject: [PATCH v2 0/1] input: add driver for Bosch Sensortec's BMA150 accelerometer Date: Thu, 23 Jun 2011 16:40:26 +0200 Message-ID: <1308840027-10724-1-git-send-email-eric.andersson@unixphere.com> Return-path: Received: from csmtp2.one.com ([91.198.169.22]:44828 "EHLO csmtp2.one.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753078Ab1FWOhp (ORCPT ); Thu, 23 Jun 2011 10:37:45 -0400 Sender: linux-input-owner@vger.kernel.org List-Id: linux-input@vger.kernel.org To: dmitry.torokhov@gmail.com Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, zhengguang.guo@bosch-sensortec.com, stefan.nilsson@unixphere.com, alan@lxorguk.ukuu.org.uk, Eric Andersson Hi, This is v2 of the bma150 driver for Bosch sensortec's digital accelerometers BMA150 and SMB380. So, what happend since last time: * community review: fixed smbus locking. * community review: removed pointless ifs. * community review: removed struct bma150acc. * community review: use human readable values for the sysfs interface. * community review: removed atomic_t for delay. * Updated header with SMB380 information. * Use standard format to print accelerometer data, i.e. (x,y,z). * Updated string format of sysfs parameters to: value1 [value2] value3... * Add enable/disable as sysfs parameter. * Added sysfs-i2c-bma150 ABI documentation. Best regards, Eric http://www.unixphere.com --- Eric Andersson (1): input: add driver for Bosch Sensortec's BMA150 accelerometer Documentation/ABI/testing/sysfs-i2c-bma150 | 71 +++ drivers/input/misc/Kconfig | 10 + drivers/input/misc/Makefile | 1 + drivers/input/misc/bma150.c | 684 ++++++++++++++++++++++++++++ 4 files changed, 766 insertions(+), 0 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-i2c-bma150 create mode 100644 drivers/input/misc/bma150.c -- 1.7.3.4