From mboxrd@z Thu Jan 1 00:00:00 1970 From: Eric Andersson Subject: [PATCH v3 0/1] input: add driver for Bosch Sensortec's BMA150 accelerometer Date: Thu, 14 Jul 2011 23:56:11 +0200 Message-ID: <1310680572-27410-1-git-send-email-eric.andersson@unixphere.com> Return-path: Received: from csmtp2.one.com ([91.198.169.22]:21405 "EHLO csmtp2.one.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754613Ab1GNVwp (ORCPT ); Thu, 14 Jul 2011 17:52:45 -0400 Sender: linux-input-owner@vger.kernel.org List-Id: linux-input@vger.kernel.org To: dmitry.torokhov@gmail.com Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, zhengguang.guo@bosch-sensortec.com, stefan.nilsson@unixphere.com, alan@lxorguk.ukuu.org.uk, Eric Andersson This is version 3 of the driver for Bosch Sensortec's accelerometers BMA150 and SMB380. Since last time around, the following has happened: * community review: Register the driver as a input_polled_device. * community review: added runtime_pm support. * community review: removed sysfs enable node * community review: removed the value sysfs node * community review: rephrased delay sysfs description * Removed mode sysfs node * Removed delay sysfs node * Listed both bma150 & smb380 as supported i2c device id's. * Added hw initialization function which will be called upon probing. * Added soft reset function to be called from the probe. * Minor consistency changes. -- Best regards, Eric http://www.unixphere.com Eric Andersson (1): input: add driver for Bosch Sensortec's BMA150 accelerometer Documentation/ABI/testing/sysfs-i2c-bma150 | 22 + drivers/input/misc/Kconfig | 11 + drivers/input/misc/Makefile | 1 + drivers/input/misc/bma150.c | 577 ++++++++++++++++++++++++++++ 4 files changed, 611 insertions(+), 0 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-i2c-bma150 create mode 100644 drivers/input/misc/bma150.c -- 1.7.3.4