From: Javier Martinez Canillas <martinez.javier@gmail.com>
To: Henrik Rydberg <rydberg@euromail.se>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Mohan Pallaka <mpallaka@codeaurora.org>,
Kevin McNeely <kev@cypress.com>,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
Javier Martinez Canillas <martinez.javier@gmail.com>
Subject: [PATCH v5 2/3] Input: cyttsp - add support for Cypress TTSP touchscreen I2C bus interface
Date: Sat, 8 Oct 2011 20:37:59 +0200 [thread overview]
Message-ID: <1318099080-26227-3-git-send-email-martinez.javier@gmail.com> (raw)
In-Reply-To: <1318099080-26227-1-git-send-email-martinez.javier@gmail.com>
The driver is composed of a core driver that process the data sent by
the contacts and a set of bus specific interface modules.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
---
v2: Fix issues called out by Dmitry Torokhov
- Extract the IRQ from the i2c client data and pass to cyttsp_core_init()
v3: Fix issues called out by Henrik Rydberg and Mohan Pallaka
- Remove bus type info since it is not used.
drivers/input/touchscreen/cyttsp/cyttsp_i2c.c | 190 +++++++++++++++++++++++++
1 files changed, 190 insertions(+), 0 deletions(-)
create mode 100644 drivers/input/touchscreen/cyttsp/cyttsp_i2c.c
diff --git a/drivers/input/touchscreen/cyttsp/cyttsp_i2c.c b/drivers/input/touchscreen/cyttsp/cyttsp_i2c.c
new file mode 100644
index 0000000..146a16d
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp/cyttsp_i2c.c
@@ -0,0 +1,190 @@
+/*
+ * Source for:
+ * Cypress TrueTouch(TM) Standard Product (TTSP) I2C touchscreen driver.
+ * For use with Cypress Txx3xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2011 Javier Martinez Canillas <martinez.javier@gmail.com>
+ *
+ * Multi-touch protocol type B support and cleanups by Javier Martinez Canillas
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com>
+ *
+ */
+
+#include "cyttsp_core.h"
+
+#include <linux/i2c.h>
+#include <linux/slab.h>
+
+#define CY_I2C_DATA_SIZE 128
+
+struct cyttsp_i2c {
+ struct cyttsp_bus_ops ops;
+ struct i2c_client *client;
+ void *ttsp_client;
+ u8 wr_buf[CY_I2C_DATA_SIZE];
+};
+
+static s32 ttsp_i2c_read_block_data(void *handle, u8 addr,
+ u8 length, void *values)
+{
+ struct cyttsp_i2c *ts = container_of(handle, struct cyttsp_i2c, ops);
+ int retval = 0;
+
+ retval = i2c_master_send(ts->client, &addr, 1);
+ if (retval < 0)
+ return retval;
+
+ retval = i2c_master_recv(ts->client, values, length);
+
+ return (retval < 0) ? retval : 0;
+}
+
+static s32 ttsp_i2c_write_block_data(void *handle, u8 addr,
+ u8 length, const void *values)
+{
+ struct cyttsp_i2c *ts = container_of(handle, struct cyttsp_i2c, ops);
+ int retval;
+
+ ts->wr_buf[0] = addr;
+ memcpy(&ts->wr_buf[1], values, length);
+
+ retval = i2c_master_send(ts->client, ts->wr_buf, length+1);
+
+ return (retval < 0) ? retval : 0;
+}
+
+static s32 ttsp_i2c_tch_ext(void *handle, void *values)
+{
+ struct cyttsp_i2c *ts = container_of(handle, struct cyttsp_i2c, ops);
+ int retval = 0;
+
+ /*
+ * TODO: Add custom touch extension handling code here
+ * set: retval < 0 for any returned system errors,
+ * retval = 0 if normal touch handling is required,
+ * retval > 0 if normal touch handling is *not* required
+ */
+ if (!ts || !values)
+ retval = -EINVAL;
+
+ return retval;
+}
+
+static int __devinit cyttsp_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct cyttsp_i2c *ts;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+ return -EIO;
+
+ /* allocate and clear memory */
+ ts = kzalloc(sizeof(*ts), GFP_KERNEL);
+ if (!ts) {
+ dev_dbg(&client->dev, "%s: Error, kzalloc.\n", __func__);
+ return -ENOMEM;
+ }
+
+ /* register driver_data */
+ ts->client = client;
+ i2c_set_clientdata(client, ts);
+ ts->ops.write = ttsp_i2c_write_block_data;
+ ts->ops.read = ttsp_i2c_read_block_data;
+ ts->ops.ext = ttsp_i2c_tch_ext;
+ ts->ops.dev = &client->dev;
+
+ ts->ttsp_client = cyttsp_core_init(&ts->ops, &client->dev, client->irq);
+ if (IS_ERR(ts->ttsp_client)) {
+ int retval = PTR_ERR(ts->ttsp_client);
+ kfree(ts);
+ return retval;
+ }
+
+ dev_dbg(ts->ops.dev, "%s: Registration complete\n", __func__);
+
+ return 0;
+}
+
+
+/* registered in driver struct */
+static int __devexit cyttsp_i2c_remove(struct i2c_client *client)
+{
+ struct cyttsp_i2c *ts;
+
+ ts = i2c_get_clientdata(client);
+ cyttsp_core_release(ts->ttsp_client);
+ kfree(ts);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int cyttsp_i2c_suspend(struct i2c_client *client, pm_message_t message)
+{
+ struct cyttsp_i2c *ts = i2c_get_clientdata(client);
+
+ return cyttsp_suspend(ts->ttsp_client);
+}
+
+static int cyttsp_i2c_resume(struct i2c_client *client)
+{
+ struct cyttsp_i2c *ts = i2c_get_clientdata(client);
+
+ return cyttsp_resume(ts->ttsp_client);
+}
+#endif
+
+static const struct i2c_device_id cyttsp_i2c_id[] = {
+ { CY_I2C_NAME, 0 }, { }
+};
+
+static struct i2c_driver cyttsp_i2c_driver = {
+ .driver = {
+ .name = CY_I2C_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = cyttsp_i2c_probe,
+ .remove = __devexit_p(cyttsp_i2c_remove),
+ .id_table = cyttsp_i2c_id,
+#ifdef CONFIG_PM
+ .suspend = cyttsp_i2c_suspend,
+ .resume = cyttsp_i2c_resume,
+#endif
+};
+
+static int __init cyttsp_i2c_init(void)
+{
+ return i2c_add_driver(&cyttsp_i2c_driver);
+}
+
+static void __exit cyttsp_i2c_exit(void)
+{
+ return i2c_del_driver(&cyttsp_i2c_driver);
+}
+
+module_init(cyttsp_i2c_init);
+module_exit(cyttsp_i2c_exit);
+
+MODULE_ALIAS("i2c:cyttsp");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) I2C driver");
+MODULE_AUTHOR("Cypress");
+MODULE_DEVICE_TABLE(i2c, cyttsp_i2c_id);
--
1.7.4.1
next prev parent reply other threads:[~2011-10-08 18:37 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-08 18:37 [PATCH v5 0/3] Input: Cypress TTSP device driver Javier Martinez Canillas
2011-10-08 18:37 ` [PATCH v5 1/3] Input: cyttsp - Cypress TTSP capacitive multi-touch screen support Javier Martinez Canillas
2011-10-13 18:03 ` Henrik Rydberg
2011-10-13 22:32 ` Javier Martinez Canillas
2011-10-08 18:37 ` Javier Martinez Canillas [this message]
[not found] ` <CAM=Q2cvpw4hUA5zY8Gc9xM4wi1wVNJB92iD=X65u1ip6K72pSA@mail.gmail.com>
2011-10-10 18:51 ` [PATCH v5 2/3] Input: cyttsp - add support for Cypress TTSP touchscreen I2C bus interface Javier Martinez Canillas
2011-10-08 18:38 ` [PATCH v5 3/3] Input: cyttsp - add support for Cypress TTSP touchscreen SPI " Javier Martinez Canillas
2011-10-13 14:06 ` [PATCH v5 0/3] Input: Cypress TTSP device driver Javier Martinez Canillas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1318099080-26227-3-git-send-email-martinez.javier@gmail.com \
--to=martinez.javier@gmail.com \
--cc=dmitry.torokhov@gmail.com \
--cc=kev@cypress.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mpallaka@codeaurora.org \
--cc=rydberg@euromail.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).