From: chris@cnpbagwell.com
To: linux-input@vger.kernel.org, dmitry.torokhov@gmail.com,
pinglinux@gmail.com
Cc: Chris Bagwell <chris@cnpbagwell.com>
Subject: [PATCH v2 6/6] Input: wacom - 3rd gen Bamboo P&Touch packet support
Date: Tue, 18 Oct 2011 20:43:13 -0500 [thread overview]
Message-ID: <1318988593-2712-1-git-send-email-chris@cnpbagwell.com> (raw)
From: Chris Bagwell <chris@cnpbagwell.com>
3rd generation Bamboo Pen and Touch tablets reuse the older
stylus packet but add an extra fixed zero pad byte to end.
The touch packets are quite different since it supports tracking
of up to 16 touches. The packet is 64-byte fixed size but contains
up to 15 smaller messages indicating data for a single touch or
for tablet button presses.
Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
---
New in v2. There were 2 sets of indentation errors that were fixed.
No code change. No changes in other 5 patches so only resending this
one.
drivers/input/tablet/wacom_wac.c | 94 ++++++++++++++++++++++++++++++++++++--
drivers/input/tablet/wacom_wac.h | 4 +-
2 files changed, 93 insertions(+), 5 deletions(-)
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index d1ced32..13d86c5 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -836,6 +836,64 @@ static int wacom_bpt_touch(struct wacom_wac *wacom)
return 0;
}
+static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data)
+{
+ struct input_dev *input = wacom->input;
+ int slot_id = data[0] - 2;
+ bool touch = data[1] & 0x80;
+
+ touch = touch && !wacom->shared->stylus_in_proximity;
+
+ input_mt_slot(input, slot_id);
+ input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
+
+ if (touch) {
+ int x = (data[2] << 4) | (data[4] >> 4);
+ int y = (data[3] << 4) | (data[4] & 0x0f);
+ int w = data[6];
+
+ input_report_abs(input, ABS_MT_POSITION_X, x);
+ input_report_abs(input, ABS_MT_POSITION_Y, y);
+ input_report_abs(input, ABS_MT_TOUCH_MAJOR, w);
+ }
+}
+
+static void wacom_bpt3_button_msg(struct wacom_wac *wacom, unsigned char *data)
+{
+ struct input_dev *input = wacom->input;
+
+ input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0);
+ input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0);
+ input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0);
+ input_report_key(input, BTN_RIGHT, (data[1] & 0x01) != 0);
+}
+
+static int wacom_bpt3_touch(struct wacom_wac *wacom)
+{
+ struct input_dev *input = wacom->input;
+ unsigned char *data = wacom->data;
+ int count = data[1] & 0x03;
+ int i;
+
+ /* data has up to 7 fixed sized 8-byte messages starting at data[2] */
+ for (i = 0; i < count && i < 8; i++) {
+ int offset = (8 * i)+2;
+ int msg_id = data[offset];
+
+ if (msg_id >= 2 && msg_id <= 17)
+ wacom_bpt3_touch_msg(wacom, data+offset);
+ else if (msg_id == 128)
+ wacom_bpt3_button_msg(wacom, data+offset);
+
+ }
+
+ input_mt_report_pointer_emulation(input, true);
+
+ input_sync(input);
+
+ return 0;
+}
+
static int wacom_bpt_pen(struct wacom_wac *wacom)
{
struct input_dev *input = wacom->input;
@@ -906,7 +964,9 @@ static int wacom_bpt_irq(struct wacom_wac *wacom, size_t len)
{
if (len == WACOM_PKGLEN_BBTOUCH)
return wacom_bpt_touch(wacom);
- else if (len == WACOM_PKGLEN_BBFUN)
+ else if (len == WACOM_PKGLEN_BBTOUCH3)
+ return wacom_bpt3_touch(wacom);
+ else if (len == WACOM_PKGLEN_BBFUN || len == WACOM_PKGLEN_BBPEN)
return wacom_bpt_pen(wacom);
return 0;
@@ -1025,9 +1085,9 @@ void wacom_setup_device_quirks(struct wacom_features *features)
features->type == BAMBOO_PT)
features->quirks |= WACOM_QUIRK_MULTI_INPUT;
- /* quirks for bamboo touch */
+ /* quirk for bamboo touch with 2 low res touches */
if (features->type == BAMBOO_PT &&
- features->device_type == BTN_TOOL_DOUBLETAP) {
+ features->pktlen == WACOM_PKGLEN_BBTOUCH) {
features->x_max <<= 5;
features->y_max <<= 5;
features->x_fuzz <<= 5;
@@ -1213,7 +1273,21 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
- input_mt_init_slots(input_dev, 2);
+ if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
+ __set_bit(BTN_TOOL_TRIPLETAP,
+ input_dev->keybit);
+ __set_bit(BTN_TOOL_QUADTAP,
+ input_dev->keybit);
+
+ input_mt_init_slots(input_dev, 16);
+
+ input_set_abs_params(input_dev,
+ ABS_MT_TOUCH_MAJOR,
+ 0, 255, 0, 0);
+ } else {
+ input_mt_init_slots(input_dev, 2);
+ }
+
input_set_abs_params(input_dev, ABS_MT_POSITION_X,
0, features->x_max,
features->x_fuzz, 0);
@@ -1479,6 +1553,15 @@ static const struct wacom_features wacom_features_0xDA =
static struct wacom_features wacom_features_0xDB =
{ "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN, 21648, 13700, 1023,
31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0xDD =
+ { "Wacom Bamboo Connect", WACOM_PKGLEN_BBPEN, 14720, 9200, 1023,
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0xDE =
+ { "Wacom Bamboo 16FG 4x5", WACOM_PKGLEN_BBPEN, 14720, 9200, 1023,
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0xDF =
+ { "Wacom Bamboo 16FG 6x8", WACOM_PKGLEN_BBPEN, 21648, 13700, 1023,
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x6004 =
{ "ISD-V4", WACOM_PKGLEN_GRAPHIRE, 12800, 8000, 255,
0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -1574,6 +1657,9 @@ const struct usb_device_id wacom_ids[] = {
{ USB_DEVICE_WACOM(0xD8) },
{ USB_DEVICE_WACOM(0xDA) },
{ USB_DEVICE_WACOM(0xDB) },
+ { USB_DEVICE_WACOM(0xDD) },
+ { USB_DEVICE_WACOM(0xDE) },
+ { USB_DEVICE_WACOM(0xDF) },
{ USB_DEVICE_WACOM(0xF0) },
{ USB_DEVICE_WACOM(0xCC) },
{ USB_DEVICE_WACOM(0x90) },
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 53eb71b..d54ffcb 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -12,7 +12,7 @@
#include <linux/types.h>
/* maximum packet length for USB devices */
-#define WACOM_PKGLEN_MAX 32
+#define WACOM_PKGLEN_MAX 64
/* packet length for individual models */
#define WACOM_PKGLEN_PENPRTN 7
@@ -22,6 +22,8 @@
#define WACOM_PKGLEN_TPC1FG 5
#define WACOM_PKGLEN_TPC2FG 14
#define WACOM_PKGLEN_BBTOUCH 20
+#define WACOM_PKGLEN_BBPEN 10
+#define WACOM_PKGLEN_BBTOUCH3 64
/* device IDs */
#define STYLUS_DEVICE_ID 0x02
--
1.7.6.4
next reply other threads:[~2011-10-19 1:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-19 1:43 chris [this message]
2011-10-22 12:26 ` [PATCH v2 6/6] Input: wacom - 3rd gen Bamboo P&Touch packet support Henrik Rydberg
2011-10-23 22:14 ` Chris Bagwell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1318988593-2712-1-git-send-email-chris@cnpbagwell.com \
--to=chris@cnpbagwell.com \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=pinglinux@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).