From: Daniel Kurtz <djkurtz@chromium.org>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Henrik Rydberg <rydberg@euromail.se>,
Joonyoung Shim <jy0922.shim@samsung.com>,
Nick Dyer <nick.dyer@itdev.co.uk>,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
Benson Leung <bleung@chromium.org>,
Yufeng Shen <miletus@chromium.org>
Cc: Daniel Kurtz <djkurtz@chromium.org>
Subject: [PATCH 08/16 v2] Input: atmel_mxt_ts - refactor mxt_object_show
Date: Fri, 30 Mar 2012 00:49:18 +0800 [thread overview]
Message-ID: <1333039766-8617-9-git-send-email-djkurtz@chromium.org> (raw)
In-Reply-To: <1333039766-8617-1-git-send-email-djkurtz@chromium.org>
Read each object with a single i2c transaction instead of byte-by-byte.
Also, don't read T5, which is the message processor object. Reading
it is counter-productive since it either holds garbage (there is no
pending message), or, it holds a real message which should be handled
by the messages handling code (the isr).
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 43 ++++++++++++------------------
1 files changed, 17 insertions(+), 26 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index b6e7109..a865967 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -262,7 +262,6 @@ struct mxt_data {
static bool mxt_object_readable(unsigned int type)
{
switch (type) {
- case MXT_GEN_MESSAGE_T5:
case MXT_GEN_COMMAND_T6:
case MXT_GEN_POWER_T7:
case MXT_GEN_ACQUIRE_T8:
@@ -459,6 +458,13 @@ mxt_get_object(struct mxt_data *data, u8 type)
return NULL;
}
+static int mxt_read_object(struct mxt_data *data, struct mxt_object *object,
+ void *val)
+{
+ return mxt_read_reg(data->client, object->start_address, object->size,
+ val);
+}
+
static int mxt_read_message(struct mxt_data *data,
struct mxt_message *message)
{
@@ -474,20 +480,6 @@ static int mxt_read_message(struct mxt_data *data,
message);
}
-static int mxt_read_object(struct mxt_data *data,
- u8 type, u8 offset, u8 *val)
-{
- struct mxt_object *object;
- u16 reg;
-
- object = mxt_get_object(data, type);
- if (!object)
- return -EINVAL;
-
- reg = object->start_address;
- return mxt_read_reg(data->client, reg + offset, 1, val);
-}
-
static int mxt_write_object(struct mxt_data *data,
u8 type, u8 offset, u8 val)
{
@@ -885,17 +877,16 @@ static void mxt_calc_resolution(struct mxt_data *data)
}
static ssize_t mxt_object_show(struct device *dev,
- struct device_attribute *attr, char *buf)
+ struct device_attribute *attr, char *buf)
{
struct mxt_data *data = dev_get_drvdata(dev);
- struct mxt_object *object;
int count = 0;
int i, j;
int error;
- u8 val;
+ u8 obuf[256];
for (i = 0; i < data->info.object_num; i++) {
- object = data->object_table + i;
+ struct mxt_object *object = &data->object_table[i];
count += snprintf(buf + count, PAGE_SIZE - count,
"Object[%d] (Type %d)\n",
@@ -905,20 +896,20 @@ static ssize_t mxt_object_show(struct device *dev,
if (!mxt_object_readable(object->type)) {
count += snprintf(buf + count, PAGE_SIZE - count,
- "\n");
+ "\n");
if (count >= PAGE_SIZE)
return PAGE_SIZE - 1;
continue;
}
- for (j = 0; j < object->size; j++) {
- error = mxt_read_object(data,
- object->type, j, &val);
- if (error)
- return error;
+ error = mxt_read_object(data, object, obuf);
+ if (error)
+ return error;
+ for (j = 0; j < object->size; j++) {
count += snprintf(buf + count, PAGE_SIZE - count,
- "\t[%2d]: %02x (%d)\n", j, val, val);
+ "\t[%2d]: %02x (%d)\n", j, obuf[j],
+ obuf[j]);
if (count >= PAGE_SIZE)
return PAGE_SIZE - 1;
}
--
1.7.7.3
next prev parent reply other threads:[~2012-03-29 16:49 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-29 16:49 [PATCH 00/16 v2] cleanup atmel_mxt_ts Daniel Kurtz
2012-03-29 16:49 ` [PATCH 01/16 v2] Input: atmel_mxt_ts - use CONFIG_PM_SLEEP Daniel Kurtz
2012-03-29 16:49 ` [PATCH 02/16 v2] Input: atmel_mxt_ts - only allow root to update firmware Daniel Kurtz
2012-03-29 16:49 ` [PATCH 03/16 v2] Input: atmel_mxt_ts - refactor mxt_read/write_reg to take a length Daniel Kurtz
2012-04-11 9:05 ` Henrik Rydberg
2012-04-14 4:12 ` Daniel Kurtz
2012-03-29 16:49 ` [PATCH 04/16 v2] Input: atmel_mxt_ts - store actual size and instance Daniel Kurtz
2012-03-29 16:49 ` [PATCH 05/16 v2] Input: atmel_mxt_ts - verify object size in mxt_write_object Daniel Kurtz
2012-03-29 16:49 ` [PATCH 06/16 v2] Input: atmel_mxt_ts - do not read extra (checksum) byte Daniel Kurtz
2012-03-29 16:49 ` [PATCH 07/16 v2] Input: atmel_mxt_ts - dump each message on just 1 line Daniel Kurtz
2012-03-29 16:49 ` Daniel Kurtz [this message]
2012-04-11 16:25 ` [PATCH 08/16 v2] Input: atmel_mxt_ts - refactor mxt_object_show Henrik Rydberg
2012-03-29 16:49 ` [PATCH 09/16 v2] Input: atmel_mxt_ts - optimize writing of object table entries Daniel Kurtz
2012-04-13 9:13 ` Henrik Rydberg
2012-03-29 16:49 ` [PATCH 10/16 v2] Input: atmel_mxt_ts - refactor get info Daniel Kurtz
2012-03-29 16:49 ` [PATCH 11/16 v2] Input: atmel_mxt_ts - refactor reading object table Daniel Kurtz
2012-04-13 9:11 ` Henrik Rydberg
2012-04-13 9:21 ` Daniel Kurtz
2012-04-13 9:34 ` Henrik Rydberg
2012-04-13 10:10 ` Daniel Kurtz
2012-04-13 11:09 ` Henrik Rydberg
2012-03-29 16:49 ` [PATCH 12/16 v2] Input: atmel_mxt_ts - simplify event reporting Daniel Kurtz
2012-03-29 16:49 ` [PATCH 13/16 v2] Input: atmel_mxt_ts - cache T9 reportid range when reading object table Daniel Kurtz
2012-03-29 16:49 ` [PATCH 14/16 v2] Input: atmel_mxt_ts - parse vector field of data packets Daniel Kurtz
2012-03-29 16:49 ` [PATCH 15/16 v2] Input: atmel_mxt_ts - send all MT-B slots in one input report Daniel Kurtz
2012-04-13 9:20 ` Henrik Rydberg
2012-03-29 16:49 ` [PATCH 16/16 v2] Input: atmel_mxt_ts - parse T6 reports Daniel Kurtz
2012-04-09 13:14 ` [PATCH 00/16 v2] cleanup atmel_mxt_ts Daniel Kurtz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1333039766-8617-9-git-send-email-djkurtz@chromium.org \
--to=djkurtz@chromium.org \
--cc=bleung@chromium.org \
--cc=dmitry.torokhov@gmail.com \
--cc=jy0922.shim@samsung.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=miletus@chromium.org \
--cc=nick.dyer@itdev.co.uk \
--cc=rydberg@euromail.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).