From mboxrd@z Thu Jan 1 00:00:00 1970 From: Roland Stigge Subject: [PATCH v2 4/8] ARM: LPC32xx: Remove obsolete platform Kconfig Date: Tue, 17 Apr 2012 19:08:23 +0200 Message-ID: <1334682507-15055-5-git-send-email-stigge@antcom.de> References: <1334682507-15055-1-git-send-email-stigge@antcom.de> Return-path: Received: from mail.work-microwave.de ([62.245.205.51]:35326 "EHLO work-microwave.de" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1755477Ab2DQRJX (ORCPT ); Tue, 17 Apr 2012 13:09:23 -0400 In-Reply-To: <1334682507-15055-1-git-send-email-stigge@antcom.de> Sender: linux-input-owner@vger.kernel.org List-Id: linux-input@vger.kernel.org To: arm@kernel.org, linux-arm-kernel@lists.infradead.org, thierry.reding@avionic-design.de, gregkh@linuxfoundation.org, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, linux-input@vger.kernel.org, dmitry.torokhov@gmail.com, axel.lin@gmail.com, broonie@opensource.wolfsonmicro.com, marek.vasut@gmail.com, devel@driverdev.osuosl.org, kevin.wells@nxp.com, srinivas.bakki@nxp.com Cc: Roland Stigge This patch removes two Kconfig options now unused (the network driver is configured via DT now). Signed-off-by: Roland Stigge --- Applies to v3.4-rc3 --- linux-2.6.orig/arch/arm/mach-lpc32xx/Kconfig +++ linux-2.6/arch/arm/mach-lpc32xx/Kconfig @@ -29,30 +29,4 @@ config ARCH_LPC32XX_UART6_SELECT endmenu -menu "LPC32XX chip components" - -config ARCH_LPC32XX_IRAM_FOR_NET - bool "Use IRAM for network buffers" - default y - help - Say Y here to use the LPC internal fast IRAM (i.e. 256KB SRAM) as - network buffer. If the total combined required buffer sizes is - larger than the size of IRAM, then SDRAM will be used instead. - - This can be enabled safely if the IRAM is not intended for other - uses. - -config ARCH_LPC32XX_MII_SUPPORT - bool "Check to enable MII support or leave disabled for RMII support" - help - Say Y here to enable MII support, or N for RMII support. Regardless of - which support is selected, the ethernet interface driver needs to be - selected in the device driver networking section. - - The PHY3250 reference board uses RMII, so users of this board should - say N. - -endmenu - endif -