linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Roland Stigge <stigge-uj/7R2tJ6VmzQB+pC5nmwQ@public.gmane.org>
To: arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org,
	gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org,
	linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	axel.lin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org,
	marek.vasut-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	devel-gWbeCf7V1WCQmaza687I9mD2FQJk+8+b@public.gmane.org,
	kevin.wells-3arQi8VN3Tc@public.gmane.org,
	srinivas.bakki-3arQi8VN3Tc@public.gmane.org
Cc: Roland Stigge <stigge-uj/7R2tJ6VmzQB+pC5nmwQ@public.gmane.org>
Subject: [PATCH v2 7/8] ARM: LPC32xx: DTS files for device tree conversion
Date: Tue, 17 Apr 2012 19:08:26 +0200	[thread overview]
Message-ID: <1334682507-15055-8-git-send-email-stigge@antcom.de> (raw)
In-Reply-To: <1334682507-15055-1-git-send-email-stigge-uj/7R2tJ6VmzQB+pC5nmwQ@public.gmane.org>

This patch adds the dts files for the reference machine of LPC32xx:

* arch/arm/boot/dts/lpc32xx.dtsi: Include for devices based on LPC32xx
* arch/arm/boot/dts/phy3250.dts: Board support for PHYTEC phyCORE-LPC3250

Signed-off-by: Roland Stigge <stigge-uj/7R2tJ6VmzQB+pC5nmwQ@public.gmane.org>

---
 arch/arm/boot/dts/lpc32xx.dtsi |  303 +++++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/phy3250.dts  |  115 +++++++++++++++
 2 files changed, 418 insertions(+)

--- /dev/null
+++ linux-2.6/arch/arm/boot/dts/lpc32xx.dtsi
@@ -0,0 +1,303 @@
+/*
+ * NXP LPC32xx SoC
+ *
+ * Copyright 2012 Roland Stigge <stigge-uj/7R2tJ6VmzQB+pC5nmwQ@public.gmane.org>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "nxp,lpc32xx";
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x20000000 0x20000000 0x30000000>;
+
+		slc: flash@20020000 {
+			compatible = "nxp,nand-slc";
+			reg = <0x20020000 0x1000>;
+			status = "disable";
+		};
+
+		mlc: flash@200B0000 {
+			compatible = "nxp,nand-mlc";
+			reg = <0x200B0000 0x1000>;
+			status = "disable";
+		};
+
+		dma@31000000 {
+			compatible = "arm,pl080", "arm,primecell";
+			reg = <0x31000000 0x1000>;
+			interrupt-parent = <&mic>;
+			interrupts = <0x1c 0>;
+		};
+
+		/*
+		 * Enable either ohci or usbd (gadget)!
+		 */
+		ohci@31020000 {
+			compatible = "nxp,ohci-nxp", "usb-ohci";
+			reg = <0x31020000 0x300>;
+			interrupt-parent = <&mic>;
+			interrupts = <0x3b 0>;
+			status = "disable";
+		};
+
+		usbd@31020000 {
+			compatible = "nxp,lpc32xx-udc";
+			reg = <0x31020000 0x300>;
+			interrupt-parent = <&mic>;
+			interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
+			status = "disable";
+		};
+
+		clcd@31040000 {
+			compatible = "arm,pl110", "arm,primecell";
+			reg = <0x31040000 0x1000>;
+			interrupt-parent = <&mic>;
+			interrupts = <0x0e 0>;
+			status = "disable";
+		};
+
+		mac: ethernet@31060000 {
+			compatible = "nxp,lpc-eth";
+			reg = <0x31060000 0x1000>;
+			interrupt-parent = <&mic>;
+			interrupts = <0x1d 0>;
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x20000000 0x20000000 0x30000000>;
+
+			ssp0: ssp@20084000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0x20084000 0x1000>;
+				interrupt-parent = <&mic>;
+				interrupts = <0x14 0>;
+			};
+
+			spi1: spi@20088000 {
+				compatible = "nxp,spi";
+				reg = <0x20088000 0x1000>;
+			};
+
+			ssp1: ssp@2008c000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0x2008c000 0x1000>;
+				interrupt-parent = <&mic>;
+				interrupts = <0x15 0>;
+			};
+
+			spi2: spi@20090000 {
+				compatible = "nxp,spi";
+				reg = <0x20090000 0x1000>;
+			};
+
+			i2s0: i2s@20094000 {
+				compatible = "nxp,i2s";
+				reg = <0x20094000 0x1000>;
+			};
+
+			sd@20098000 {
+				compatible = "arm,pl180", "arm,primecell";
+				reg = <0x20098000 0x1000>;
+				interrupt-parent = <&mic>;
+				interrupts = <0x0f 0>, <0x0d 0>;
+			};
+
+			i2s1: i2s@2009C000 {
+				compatible = "nxp,i2s";
+				reg = <0x2009C000 0x1000>;
+			};
+
+			uart3: serial@40080000 {
+				compatible = "nxp,serial";
+				reg = <0x40080000 0x1000>;
+			};
+
+			uart4: serial@40088000 {
+				compatible = "nxp,serial";
+				reg = <0x40088000 0x1000>;
+			};
+
+			uart5: serial@40090000 {
+				compatible = "nxp,serial";
+				reg = <0x40090000 0x1000>;
+			};
+
+			uart6: serial@40098000 {
+				compatible = "nxp,serial";
+				reg = <0x40098000 0x1000>;
+			};
+
+			i2c1: i2c@400A0000 {
+				compatible = "nxp,pnx-i2c";
+				reg = <0x400A0000 0x100>;
+				interrupt-parent = <&mic>;
+				interrupts = <0x33 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pnx,timeout = <0x64>;
+			};
+
+			i2c2: i2c@400A8000 {
+				compatible = "nxp,pnx-i2c";
+				reg = <0x400A8000 0x100>;
+				interrupt-parent = <&mic>;
+				interrupts = <0x32 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pnx,timeout = <0x64>;
+			};
+
+			i2cusb: i2c@31020300 {
+				compatible = "nxp,pnx-i2c";
+				reg = <0x31020300 0x100>;
+				interrupt-parent = <&mic>;
+				interrupts = <0x3f 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pnx,timeout = <0x64>;
+			};
+		};
+
+		fab {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x20000000 0x20000000 0x30000000>;
+
+			/*
+			 * MIC Interrupt controller includes:
+			 *   MIC @40008000
+			 *   SIC1 @4000C000
+			 *   SIC2 @40010000
+			 */
+			mic: interrupt-controller@40008000 {
+				compatible = "nxp,lpc32xx-mic";
+				interrupt-controller;
+				interrupt-parent;
+				reg = <0x40008000 0xC000>;
+				#interrupt-cells = <2>;
+			};
+
+			uart1: serial@40014000 {
+				compatible = "nxp,serial";
+				reg = <0x40014000 0x1000>;
+			};
+
+			uart2: serial@40018000 {
+				compatible = "nxp,serial";
+				reg = <0x40018000 0x1000>;
+			};
+
+			uart7: serial@4001C000 {
+				compatible = "nxp,serial";
+				reg = <0x4001C000 0x1000>;
+			};
+
+			rtc@40024000 {
+				compatible = "nxp,lpc32xx-rtc";
+				reg = <0x40024000 0x1000>;
+				interrupt-parent = <&mic>;
+				interrupts = <0x34 0>;
+			};
+
+			gpio: gpio@40028000 {
+				compatible = "nxp,lpc32xx-gpio";
+				reg = <0x40028000 0x1000>;
+				/* create a private address space for enumeration */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio_p0: gpio-bank@0 {
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0>;
+				};
+
+				gpio_p1: gpio-bank@1 {
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <1>;
+				};
+
+				gpio_p2: gpio-bank@2 {
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <2>;
+				};
+
+				gpio_p3: gpio-bank@3 {
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <3>;
+				};
+
+				gpi_p3: gpio-bank@4 {
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <4>;
+				};
+
+				gpo_p3: gpio-bank@5 {
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <5>;
+				};
+			};
+
+			watchdog@4003C000 {
+				compatible = "nxp,pnx4008-wdt";
+				reg = <0x4003C000 0x1000>;
+			};
+
+			/*
+			 * TSC vs. ADC: Since those two share the same
+			 * hardware, you need to choose from one of the
+			 * following two and do 'status = "okay";" for one of
+			 * them
+			 */
+
+			adc@40048000 {
+				compatible = "nxp,lpc32xx-adc";
+				reg = <0x40048000 0x1000>;
+				interrupt-parent = <&mic>;
+				interrupts = <0x27 0>;
+				status = "disable";
+			};
+
+			tsc@40048000 {
+				compatible = "nxp,lpc32xx-tsc";
+				reg = <0x40048000 0x1000>;
+				interrupt-parent = <&mic>;
+				interrupts = <0x27 0>;
+				status = "disable";
+			};
+
+			key@40050000 {
+				compatible = "nxp,key";
+				reg = <0x40050000 0x1000>;
+			};
+
+		};
+	};
+};
--- /dev/null
+++ linux-2.6/arch/arm/boot/dts/phy3250.dts
@@ -0,0 +1,115 @@
+/*
+ * PHYTEC phyCORE-LPC3250 board
+ *
+ * Copyright 2012 Roland Stigge <stigge-uj/7R2tJ6VmzQB+pC5nmwQ@public.gmane.org>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "lpc32xx.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250";
+	compatible = "phytec,phy3250", "nxp,lpc32xx";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x4000000>;
+	};
+
+	ahb {
+		mac: ethernet@31060000 {
+			phy-mode = "rmii";
+			use-iram;
+		};
+
+		/* Here, choose from: ohci, usbd */
+		ohci@31020000 {
+			transceiver = <&isp1301>;
+			status = "okay";
+		};
+
+/*
+		usbd@31020000 {
+			transceiver = <&isp1301>;
+			status = "okay";
+		};
+*/
+
+		clcd@31040000 {
+			status = "okay";
+		};
+
+		apb {
+			i2c1: i2c@400A0000 {
+				clock-frequency = <0x186a0>;
+
+				pcf8563: rtc@51 {
+					compatible = "nxp,pcf8563";
+					reg = <0x51>;
+				};
+
+				uda1380: uda1380@18 {
+					compatible = "nxp,uda1380";
+					reg = <0x18>;
+					power-gpio = <&gpio 0x59 0>;
+					reset-gpio = <&gpio 0x51 0>;
+					dac-clk = "wspll";
+				};
+			};
+
+			i2c2: i2c@400A8000 {
+				clock-frequency = <0x186a0>;
+			};
+
+			i2cusb: i2c@31020300 {
+				clock-frequency = <0x186a0>;
+
+				isp1301: usb-transceiver@2c {
+					compatible = "nxp,isp1301";
+					reg = <0x2c>;
+				};
+			};
+
+			ssp0: ssp@20084000 {
+				eeprom: at25@0 {
+					compatible = "atmel,at25";
+				};
+			};
+		};
+
+		fab {
+			tsc@40048000 {
+				status = "okay";
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			gpios = <&gpo_p3 1 1>; /* GPO_P3 1, GPIO 80, active low */
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led1 {
+			gpios = <&gpo_p3 14 1>; /* GPO_P3 14, GPIO 93, active low */
+			linux,default-trigger = "timer";
+			default-state = "off";
+		};
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n81 root=/dev/ram0";
+	};
+};
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2012-04-17 17:08 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-04-17 17:08 [PATCH v2 0/8] Second patchset for LPC32xx device tree conversion Roland Stigge
2012-04-17 17:08 ` [PATCH v2 1/8] ohci-nxp: Driver cleanup Roland Stigge
2012-04-17 20:36   ` Arnd Bergmann
2012-04-17 21:03     ` Roland Stigge
2012-04-17 20:57   ` Dan Carpenter
2012-04-18  8:23     ` Roland Stigge
2012-04-18  4:55   ` Thierry Reding
2012-04-17 17:08 ` [PATCH v2 2/8] ohci-nxp: Device tree support Roland Stigge
2012-04-17 17:08 ` [PATCH v2 3/8] ARM: LPC32xx: clock.c update Roland Stigge
2012-04-17 21:09   ` Dan Carpenter
2012-04-18  8:33     ` Roland Stigge
2012-04-17 17:08 ` [PATCH v2 4/8] ARM: LPC32xx: Remove obsolete platform Kconfig Roland Stigge
2012-04-17 17:08 ` [PATCH v2 5/8] input: Device tree support for LPC32xx touchscreen Roland Stigge
2012-04-17 17:08 ` [PATCH v2 6/8] iio: lpc32xx-adc: Remove driver conflict due to device tree Roland Stigge
     [not found] ` <1334682507-15055-1-git-send-email-stigge-uj/7R2tJ6VmzQB+pC5nmwQ@public.gmane.org>
2012-04-17 17:08   ` Roland Stigge [this message]
     [not found]     ` <1334682507-15055-8-git-send-email-stigge-uj/7R2tJ6VmzQB+pC5nmwQ@public.gmane.org>
2012-04-18  5:46       ` [PATCH v2 7/8] ARM: LPC32xx: DTS files for device tree conversion Thierry Reding
     [not found]         ` <20120418054615.GB17506-RM9K5IK7kjIyiCvfTdI0JKcOhU4Rzj621B7CTYaBSLdn68oJJulU0Q@public.gmane.org>
2012-04-18  8:10           ` Arnd Bergmann
2012-04-18  8:36     ` Arnd Bergmann
2012-04-17 17:08 ` [PATCH v2 8/8] ARM: LPC32xx: Device tree support Roland Stigge
2012-04-18  6:02   ` Thierry Reding
2012-04-18  8:15     ` Arnd Bergmann
     [not found]     ` <20120418060230.GC17506-RM9K5IK7kjIyiCvfTdI0JKcOhU4Rzj621B7CTYaBSLdn68oJJulU0Q@public.gmane.org>
2012-04-18 12:30       ` Roland Stigge
2012-04-18 14:01         ` Arnd Bergmann
2012-04-17 20:50 ` [PATCH v2 0/8] Second patchset for LPC32xx device tree conversion Dan Carpenter
2012-04-18  8:00   ` Roland Stigge
2012-04-18  8:06   ` Arnd Bergmann
2012-04-18  9:36     ` Dan Carpenter
2012-04-18 11:00       ` Arnd Bergmann
2012-04-18 12:14         ` Dan Carpenter
2012-04-18 16:56         ` Mark Brown
2012-04-19 14:21           ` Arnd Bergmann
2012-04-18 10:45     ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1334682507-15055-8-git-send-email-stigge@antcom.de \
    --to=stigge-uj/7r2tj6vmzqb+pc5nmwq@public.gmane.org \
    --cc=arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=axel.lin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org \
    --cc=devel-gWbeCf7V1WCQmaza687I9mD2FQJk+8+b@public.gmane.org \
    --cc=dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
    --cc=kevin.wells-3arQi8VN3Tc@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=marek.vasut-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=srinivas.bakki-3arQi8VN3Tc@public.gmane.org \
    --cc=thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).