[PATCH 20/22 v4] Input: atmel_mxt_ts - use T9 reportid range to init number of mt slots

[Daniel Kurtz <djkurtz@chromium.org>]

Atmel mxt devices can report one finger for each T9 reportid.
Therefore, this range can be used to report the max number of MT-B slots
to userspace instead of assuming a fixed 10.

Note that mxt_initialized() must complete early, since the input_dev
properties now depend on values in the object table.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
---
 drivers/input/touchscreen/atmel_mxt_ts.c |   16 ++++++++--------
 1 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index f5ca237..460c10f 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -212,8 +212,6 @@
 /* Touchscreen absolute values */
 #define MXT_MAX_AREA		0xff
 
-#define MXT_MAX_FINGER		10
-
 struct mxt_info {
 	u8 family_id;
 	u8 variant_id;
@@ -1056,6 +1054,7 @@ static int __devinit mxt_probe(struct i2c_client *client,
 	struct mxt_data *data;
 	struct input_dev *input_dev;
 	int error;
+	unsigned int num_mt_slots;
 
 	if (!pdata)
 		return -EINVAL;
@@ -1082,6 +1081,10 @@ static int __devinit mxt_probe(struct i2c_client *client,
 
 	mxt_calc_resolution(data);
 
+	error = mxt_initialize(data);
+	if (error)
+		goto err_free_object;
+
 	__set_bit(EV_ABS, input_dev->evbit);
 	__set_bit(EV_KEY, input_dev->evbit);
 	__set_bit(BTN_TOUCH, input_dev->keybit);
@@ -1095,9 +1098,10 @@ static int __devinit mxt_probe(struct i2c_client *client,
 			     0, 255, 0, 0);
 
 	/* For multi touch */
-	error = input_mt_init_slots(input_dev, MXT_MAX_FINGER);
+	num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1;
+	error = input_mt_init_slots(input_dev, num_mt_slots);
 	if (error)
-		goto err_free_mem;
+		goto err_free_object;
 	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
 			     0, MXT_MAX_AREA, 0, 0);
 	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
@@ -1110,10 +1114,6 @@ static int __devinit mxt_probe(struct i2c_client *client,
 	input_set_drvdata(input_dev, data);
 	i2c_set_clientdata(client, data);
 
-	error = mxt_initialize(data);
-	if (error)
-		goto err_free_object;
-
 	error = request_threaded_irq(client->irq, NULL, mxt_interrupt,
 			pdata->irqflags, client->name, data);
 	if (error) {
-- 
1.7.7.3