linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Kurtz <djkurtz@chromium.org>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Henrik Rydberg <rydberg@euromail.se>,
	Joonyoung Shim <jy0922.shim@samsung.com>,
	Nick Dyer <nick.dyer@itdev.co.uk>,
	Yufeng Shen <miletus@chromium.org>
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
	Olof Johansson <olof@lixom.net>,
	Benson Leung <bleung@chromium.org>,
	Daniel Kurtz <djkurtz@chromium.org>
Subject: [PATCH 07/23 v6] Input: atmel_mxt_ts - optimize reading objects in object sysfs entry
Date: Thu, 28 Jun 2012 21:08:08 +0800	[thread overview]
Message-ID: <1340888904-15620-8-git-send-email-djkurtz@chromium.org> (raw)
In-Reply-To: <1340888904-15620-1-git-send-email-djkurtz@chromium.org>

Read each object in a single i2c transaction instead of byte-by-byte

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
---
 drivers/input/touchscreen/atmel_mxt_ts.c |   35 ++++++++++++-----------------
 1 files changed, 15 insertions(+), 20 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 55855b8..94dd1d1 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -479,20 +479,6 @@ static int mxt_read_message(struct mxt_data *data,
 			sizeof(struct mxt_message), message);
 }
 
-static int mxt_read_object(struct mxt_data *data,
-				u8 type, u8 offset, u8 *val)
-{
-	struct mxt_object *object;
-	u16 reg;
-
-	object = mxt_get_object(data, type);
-	if (!object)
-		return -EINVAL;
-
-	reg = object->start_address;
-	return __mxt_read_reg(data->client, reg + offset, 1, val);
-}
-
 static int mxt_write_object(struct mxt_data *data,
 				 u8 type, u8 offset, u8 val)
 {
@@ -900,7 +886,14 @@ static ssize_t mxt_object_show(struct device *dev,
 	int i, j;
 	int error;
 	u8 val;
+	u8 *obuf;
+
+	/* Pre-allocate buffer large enough to hold max sized object. */
+	obuf = kmalloc(256, GFP_KERNEL);
+	if (!obuf)
+		return -ENOMEM;
 
+	error = 0;
 	for (i = 0; i < data->info.object_num; i++) {
 		object = data->object_table + i;
 
@@ -914,20 +907,22 @@ static ssize_t mxt_object_show(struct device *dev,
 			continue;
 		}
 
+		error = __mxt_read_reg(data->client, object->start_address,
+				object->size + 1, obuf);
+		if (error)
+			break;
+
 		for (j = 0; j < object->size + 1; j++) {
-			error = mxt_read_object(data,
-						object->type, j, &val);
-			if (error)
-				return error;
+			val = obuf[j];
 
 			count += scnprintf(buf + count, PAGE_SIZE - count,
 					"\t[%2d]: %02x (%d)\n", j, val, val);
 		}
-
 		count += scnprintf(buf + count, PAGE_SIZE - count, "\n");
 	}
 
-	return count;
+	kfree(obuf);
+	return error ?: count;
 }
 
 static int mxt_load_fw(struct device *dev, const char *fn)
-- 
1.7.7.3

  parent reply	other threads:[~2012-06-28 13:08 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-28 13:08 [PATCH 00/23 v6] cleanup atmel_mxt_ts Daniel Kurtz
2012-06-28 13:08 ` [PATCH 01/23 v6] Input: atmel_mxt_ts - derive phys from i2c client adapter Daniel Kurtz
2012-06-28 13:08 ` [PATCH 02/23 v6] Input: atmel_mxt_ts - use client name for irq Daniel Kurtz
2012-06-28 13:08 ` [PATCH 03/23 v6] Input: atmel_mxt_ts - detect OOM when creating mt slots Daniel Kurtz
2012-06-28 13:08 ` [PATCH 04/23 v6] Input: atmel_mxt_ts - warn if sysfs could not be created Daniel Kurtz
2012-07-05 17:22   ` Dmitry Torokhov
2012-07-05 19:15     ` Henrik Rydberg
2012-07-16  2:34       ` Daniel Kurtz
2012-06-28 13:08 ` [PATCH 05/23 v6] Input: atmel_mxt_ts - don't read T5 when dumping objects Daniel Kurtz
2012-06-28 13:08 ` [PATCH 06/23 v6] Input: atmel_mxt_ts - use scnprintf for object sysfs entry Daniel Kurtz
2012-06-28 13:08 ` Daniel Kurtz [this message]
2012-06-28 13:08 ` [PATCH 08/23 v6] Input: atmel_mxt_ts - print less overhead when dumping objects Daniel Kurtz
2012-06-28 13:08 ` [PATCH 09/23 v6] Input: atmel_mxt_ts - print all instances " Daniel Kurtz
2012-06-28 13:08 ` [PATCH 10/23 v6] Input: atmel_mxt_ts - return errors from i2c layer Daniel Kurtz
2012-06-28 13:08 ` [PATCH 11/23 v6] Input: atmel_mxt_ts - add variable length __mxt_write_reg Daniel Kurtz
2012-06-28 13:08 ` [PATCH 12/23 v6] Input: atmel_mxt_ts - optimize writing of object table entries Daniel Kurtz
2012-06-28 13:08 ` [PATCH 13/23 v6] Input: atmel_mxt_ts - read ID information block in one i2c transaction Daniel Kurtz
2012-06-28 13:08 ` [PATCH 14/23 v6] Input: atmel_mxt_ts - update driver ID info logging Daniel Kurtz
2012-06-28 13:08 ` [PATCH 15/23 v6] Input: atmel_mxt_ts - add sysfs entries to read fw and hw version Daniel Kurtz
2012-06-28 13:08 ` [PATCH 16/23 v6] Input: atmel_mxt_ts - simplify event reporting Daniel Kurtz
2012-06-28 13:08 ` [PATCH 17/23 v6] Input: atmel_mxt_ts - add detail to touchevent debug message Daniel Kurtz
2012-06-28 13:08 ` [PATCH 18/23 v6] Input: atmel_mxt_ts - refactor when and how object table is freed Daniel Kurtz
2012-06-28 13:08 ` [PATCH 19/23 v6] Input: atmel_mxt_ts - cache T9 reportid range when reading object table Daniel Kurtz
2012-06-28 13:08 ` [PATCH 20/23 v6] Input: atmel_mxt_ts - refactor reportid checking in mxt_interrupt Daniel Kurtz
2012-06-28 13:08 ` [PATCH 21/23 v6] Input: atmel_mxt_ts - use T9 reportid range to init number of mt slots Daniel Kurtz
2012-06-28 13:08 ` [PATCH 22/23 v6] Input: atmel_mxt_ts - send all MT-B slots in one input report Daniel Kurtz
2012-06-28 13:08 ` [PATCH 23/23 v6] Input: atmel_mxt_ts - parse T6 reports Daniel Kurtz
2012-06-29 14:23 ` [PATCH 00/23 v6] cleanup atmel_mxt_ts Henrik Rydberg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1340888904-15620-8-git-send-email-djkurtz@chromium.org \
    --to=djkurtz@chromium.org \
    --cc=bleung@chromium.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=jy0922.shim@samsung.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=miletus@chromium.org \
    --cc=nick.dyer@itdev.co.uk \
    --cc=olof@lixom.net \
    --cc=rydberg@euromail.se \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).