From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hui Wang Subject: [PATCH v3 0/3] Input: egalax_ts: parse devicetree to get gpio Date: Wed, 15 Aug 2012 18:31:45 +0800 Message-ID: <1345026708-14139-1-git-send-email-jason77.wang@gmail.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Received: from mail1.windriver.com ([147.11.146.13]:54091 "EHLO mail1.windriver.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751299Ab2HOKcg (ORCPT ); Wed, 15 Aug 2012 06:32:36 -0400 Sender: linux-input-owner@vger.kernel.org List-Id: linux-input@vger.kernel.org To: dmitry.torokhov@gmail.com, jiejing.zhang@freescale.com, shawn.guo@linaro.org Cc: linux-input@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree-discuss@lists.ozlabs.org V3: Although have got Ack-by from driver author in the V2, i have to send V3 since the driver is changed due to the change of a property name in the dts. As Shawn.guo suggested, i renamed property "irq-gpio" to "wakeup-gpios". The reason is that, firstly the idiom of gpio naming in DT is *-gpios, even though most of time, it could be just one gpio, secondly as the pin is accessed as a gpio only in egalax_wake_up_device for waking up the device. This time i send the patches both to linux-input and linux-arm, 0001 and 0002 belongs to linux-input, while the 0003 belongs to linux-arm. V2: Add return value checking for waking up the controller in the probe function. V1: eeti touch screen controller is an external chip for most platforms, it connect to CPU via i2c bus, and it has a irq request pin need to be connected to a gpio of the CPU, this irq request pin also act as a wake up signal for touch screen controller, we need to get this gpio number and operate it to wake up the controller, the old way to get gpio is irq_to_gpio(), this API is dying and most platforms don't support it, we change it to a more generic way to use devcietree. Hui Wang (3): Input: egalax_ts: get gpio from devicetree node Input: add devicetree binding note for egalax_ts ARM: dts: imx6q-sabrelite: add eeti egalax touchscreen .../bindings/input/touchscreen/egalax-ts.txt | 19 +++++++++++++++++++ arch/arm/boot/dts/imx6q-sabrelite.dts | 16 ++++++++++++++++ arch/arm/boot/dts/imx6q.dtsi | 7 +++++++ drivers/input/touchscreen/egalax_ts.c | 19 ++++++++++++++++--- 4 files changed, 58 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt -- 1.7.6