From: Ashish Jangam <ashish.jangam@kpitcummins.com>
To: Grant Likely <grant.likely@secretlab.ca>,
Linus Walleij <linus.walleij@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>,
linux-input@vger.kernel.org, David Dajun Chen <dchen@diasemi.com>
Subject: [Patch v1 4/7] DA9055 GPIO driver
Date: Fri, 14 Sep 2012 19:00:16 +0530 [thread overview]
Message-ID: <1347629416.18587.15.camel@dhruva> (raw)
This is the GPIO patch for the DA9055 PMIC. This patch has got
dependency on the DA9055 MFD core.
This patch is functionally tested on SMDK6410 board.
Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
---
drivers/gpio/Kconfig | 11 +++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-da9055.c | 204 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 216 insertions(+), 0 deletions(-)
create mode 100644 drivers/gpio/gpio-da9055.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b16c8a7..0b0d884 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -86,6 +86,17 @@ config GPIO_DA9052
help
Say yes here to enable the GPIO driver for the DA9052 chip.
+config GPIO_DA9055
+ tristate "Dialog Semiconductor DA9055 GPIO"
+ depends on MFD_DA9055
+ help
+ Say yes here to enable the GPIO driver for the DA9055 chip.
+
+ The Dialog DA9055 PMIC chip has 3 GPIO pins that can be
+ be controller by this driver.
+
+ If driver is built as a module it will be called gpio-da9055.
+
config GPIO_MAX730X
tristate
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 153cace..23d9d13 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o
obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o
+obj-$(CONFIG_GPIO_DA9055) += gpio-da9055.o
obj-$(CONFIG_ARCH_DAVINCI) += gpio-davinci.o
obj-$(CONFIG_GPIO_EM) += gpio-em.o
obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
diff --git a/drivers/gpio/gpio-da9055.c b/drivers/gpio/gpio-da9055.c
new file mode 100644
index 0000000..55d83c7
--- /dev/null
+++ b/drivers/gpio/gpio-da9055.c
@@ -0,0 +1,204 @@
+/*
+ * GPIO Driver for Dialog DA9055 PMICs.
+ *
+ * Copyright(c) 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <linux/mfd/da9055/core.h>
+#include <linux/mfd/da9055/reg.h>
+#include <linux/mfd/da9055/pdata.h>
+
+#define DA9055_VDD_IO 0x0
+#define DA9055_PUSH_PULL 0x3
+#define DA9055_ACT_LOW 0x0
+#define DA9055_GPI 0x1
+#define DA9055_PORT_MASK 0x3
+#define DA9055_PORT_SHIFT(offset) (4 * (offset % 2))
+
+#define DA9055_INPUT DA9055_GPI
+#define DA9055_OUTPUT DA9055_PUSH_PULL
+#define DA9055_IRQ_GPI0 3
+
+struct da9055_gpio {
+ struct da9055 *da9055;
+ struct gpio_chip gp;
+};
+
+static inline struct da9055_gpio *to_da9055_gpio(struct gpio_chip *chip)
+{
+ return container_of(chip, struct da9055_gpio, gp);
+}
+
+static int da9055_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+ struct da9055_gpio *gpio = to_da9055_gpio(gc);
+ int gpio_direction = 0;
+ int ret;
+
+ /* Get GPIO direction */
+ ret = da9055_reg_read(gpio->da9055, (offset >> 1) + DA9055_REG_GPIO0_1);
+ if (ret < 0)
+ return ret;
+
+ gpio_direction = ret & (DA9055_PORT_MASK) << DA9055_PORT_SHIFT(offset);
+ gpio_direction >>= DA9055_PORT_SHIFT(offset);
+ switch (gpio_direction) {
+ case DA9055_INPUT:
+ ret = da9055_reg_read(gpio->da9055, DA9055_REG_STATUS_B);
+ if (ret < 0)
+ return ret;
+ break;
+ case DA9055_OUTPUT:
+ ret = da9055_reg_read(gpio->da9055, DA9055_REG_GPIO_MODE0_2);
+ if (ret < 0)
+ return ret;
+ }
+
+ return ret & (1 << offset);
+
+}
+
+static void da9055_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
+{
+ struct da9055_gpio *gpio = to_da9055_gpio(gc);
+
+ da9055_reg_update(gpio->da9055,
+ DA9055_REG_GPIO_MODE0_2,
+ 1 << offset,
+ value << offset);
+}
+
+static int da9055_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+ struct da9055_gpio *gpio = to_da9055_gpio(gc);
+ unsigned char reg_byte;
+
+ reg_byte = (DA9055_ACT_LOW | DA9055_GPI)
+ << DA9055_PORT_SHIFT(offset);
+
+ return da9055_reg_update(gpio->da9055, (offset >> 1) +
+ DA9055_REG_GPIO0_1,
+ DA9055_PORT_MASK <<
+ DA9055_PORT_SHIFT(offset),
+ reg_byte);
+}
+
+static int da9055_gpio_direction_output(struct gpio_chip *gc,
+ unsigned offset, int value)
+{
+ struct da9055_gpio *gpio = to_da9055_gpio(gc);
+ unsigned char reg_byte;
+ int ret;
+
+ reg_byte = (DA9055_VDD_IO | DA9055_PUSH_PULL)
+ << DA9055_PORT_SHIFT(offset);
+
+ ret = da9055_reg_update(gpio->da9055, (offset >> 1) +
+ DA9055_REG_GPIO0_1,
+ DA9055_PORT_MASK <<
+ DA9055_PORT_SHIFT(offset),
+ reg_byte);
+ if (ret < 0)
+ return ret;
+
+ da9055_gpio_set(gc, offset, value);
+
+ return 0;
+}
+
+static int da9055_gpio_to_irq(struct gpio_chip *gc, u32 offset)
+{
+ struct da9055_gpio *gpio = to_da9055_gpio(gc);
+ struct da9055 *da9055 = gpio->da9055;
+
+ return regmap_irq_get_virq(da9055->irq_data,
+ DA9055_IRQ_GPI0 + offset);
+}
+
+static struct gpio_chip reference_gp __devinitdata = {
+ .label = "da9055-gpio",
+ .owner = THIS_MODULE,
+ .get = da9055_gpio_get,
+ .set = da9055_gpio_set,
+ .direction_input = da9055_gpio_direction_input,
+ .direction_output = da9055_gpio_direction_output,
+ .to_irq = da9055_gpio_to_irq,
+ .can_sleep = 1,
+ .ngpio = 3,
+ .base = -1,
+};
+
+static int __devinit da9055_gpio_probe(struct platform_device *pdev)
+{
+ struct da9055_gpio *gpio;
+ struct da9055_pdata *pdata;
+ int ret;
+
+ gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+ if (gpio == NULL)
+ return -ENOMEM;
+
+ gpio->da9055 = dev_get_drvdata(pdev->dev.parent);
+ pdata = gpio->da9055->dev->platform_data;
+
+ gpio->gp = reference_gp;
+ if (pdata && pdata->gpio_base)
+ gpio->gp.base = pdata->gpio_base;
+
+ ret = gpiochip_add(&gpio->gp);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+ goto err_mem;
+ }
+
+ platform_set_drvdata(pdev, gpio);
+
+ return 0;
+
+err_mem:
+ return ret;
+}
+
+static int __devexit da9055_gpio_remove(struct platform_device *pdev)
+{
+ struct da9055_gpio *gpio = platform_get_drvdata(pdev);
+
+ return gpiochip_remove(&gpio->gp);
+}
+
+static struct platform_driver da9055_gpio_driver = {
+ .probe = da9055_gpio_probe,
+ .remove = __devexit_p(da9055_gpio_remove),
+ .driver = {
+ .name = "da9055-gpio",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init da9055_gpio_init(void)
+{
+ return platform_driver_register(&da9055_gpio_driver);
+}
+subsys_initcall(da9055_gpio_init);
+
+static void __exit da9055_gpio_exit(void)
+{
+ platform_driver_unregister(&da9055_gpio_driver);
+}
+module_exit(da9055_gpio_exit);
+
+MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
+MODULE_DESCRIPTION("DA9055 GPIO Device Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9055-gpio");
--
1.7.0.4
next reply other threads:[~2012-09-14 13:20 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-14 13:30 Ashish Jangam [this message]
2012-09-14 13:06 ` [Patch v1 4/7] DA9055 GPIO driver Laxman Dewangan
2012-09-14 14:13 ` Linus Walleij
2012-09-14 16:38 ` Mark Brown
2012-10-12 9:55 ` Ashish Jangam
2012-10-12 21:17 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1347629416.18587.15.camel@dhruva \
--to=ashish.jangam@kpitcummins.com \
--cc=dchen@diasemi.com \
--cc=grant.likely@secretlab.ca \
--cc=linus.walleij@linaro.org \
--cc=linux-input@vger.kernel.org \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).