From: Ashish Jangam <ashish.jangam@kpitcummins.com>
To: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: Samuel Ortiz <sameo@linux.intel.com>,
linux-input@vger.kernel.org, David Dajun Chen <dchen@diasemi.com>
Subject: [Patch v1 7/7] DA9055 Onkey driver
Date: Fri, 14 Sep 2012 19:04:37 +0530 [thread overview]
Message-ID: <1347629677.18587.21.camel@dhruva> (raw)
This is the ONKEY driver of the Dialog DA9055 PMIC and depends on the
DA9055 MFD core driver.
This patch is functionally tested on SMDK6410 board.
Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
---
drivers/input/misc/Kconfig | 10 +++
drivers/input/misc/Makefile | 1 +
drivers/input/misc/da9055_onkey.c | 121 +++++++++++++++++++++++++++++++++++++
3 files changed, 132 insertions(+), 0 deletions(-)
create mode 100644 drivers/input/misc/da9055_onkey.c
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 7c0f1ec..6a45cb8 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -486,6 +486,16 @@ config INPUT_DA9052_ONKEY
To compile this driver as a module, choose M here: the
module will be called da9052_onkey.
+config INPUT_DA9055_ONKEY
+ tristate "Dialog Semiconductor DA9055 ONKEY"
+ depends on MFD_DA9055
+ help
+ Support the ONKEY of DA9055 PMICs as an input device
+ reporting power button status.
+
+ To compile this driver as a module, choose M here: the module
+ will be called da9055_onkey.
+
config INPUT_DM355EVM
tristate "TI DaVinci DM355 EVM Keypad and IR Remote"
depends on MFD_DM355EVM_MSP
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 83fe6f5..23347e3 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_INPUT_CMA3000) += cma3000_d0x.o
obj-$(CONFIG_INPUT_CMA3000_I2C) += cma3000_d0x_i2c.o
obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o
obj-$(CONFIG_INPUT_DA9052_ONKEY) += da9052_onkey.o
+obj-$(CONFIG_INPUT_DA9055_ONKEY) += da9055_onkey.o
obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o
obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o
obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o
diff --git a/drivers/input/misc/da9055_onkey.c b/drivers/input/misc/da9055_onkey.c
new file mode 100644
index 0000000..05f2996
--- /dev/null
+++ b/drivers/input/misc/da9055_onkey.c
@@ -0,0 +1,121 @@
+/*
+ * ON pin driver for Dialog DA9055 PMICs
+ *
+ * Copyright(c) 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/da9055/core.h>
+
+static irqreturn_t da9055_onkey_irq(int irq, void *data)
+{
+ struct input_dev *input_dev = data;
+
+ input_report_key(input_dev, KEY_POWER, 1);
+ input_sync(input_dev);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit da9055_onkey_probe(struct platform_device *pdev)
+{
+ struct input_dev *input_dev;
+ int irq, err;
+
+ irq = platform_get_irq_byname(pdev, "ONKEY");
+ if (irq < 0) {
+ dev_err(&pdev->dev,
+ "Failed to get an IRQ for input device, %d\n", irq);
+ return -EINVAL;
+ }
+
+ input_dev = input_allocate_device();
+ if (!input_dev) {
+ dev_err(&pdev->dev, "Failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ input_dev->name = "da9055-onkey";
+ input_dev->phys = "da9055-onkey/input0";
+ input_dev->dev.parent = &pdev->dev;
+
+ input_dev->evbit[0] = BIT_MASK(EV_KEY);
+ __set_bit(KEY_POWER, input_dev->keybit);
+
+ err = request_threaded_irq(irq, NULL, da9055_onkey_irq,
+ IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+ "ONKEY", input_dev);
+ if (err < 0) {
+ dev_err(&pdev->dev,
+ "Failed to register ONKEY IRQ %d, error = %d\n",
+ irq, err);
+ goto free_onkey;
+ }
+
+ err = input_register_device(input_dev);
+ if (err) {
+ dev_err(&pdev->dev, "Unable to register input device, %d\n",
+ err);
+ goto free_irq;
+ }
+
+ platform_set_drvdata(pdev, input_dev);
+
+ return 0;
+
+free_irq:
+ free_irq(irq, input_dev);
+free_onkey:
+ input_free_device(input_dev);
+
+ return err;
+}
+
+static int __devexit da9055_onkey_remove(struct platform_device *pdev)
+{
+ struct input_dev *input_dev = platform_get_drvdata(pdev);
+ int irq = platform_get_irq(pdev, 0);
+
+ free_irq(irq, input_dev);
+ input_unregister_device(input_dev);
+
+ return 0;
+}
+
+static struct platform_driver da9055_onkey_driver = {
+ .probe = da9055_onkey_probe,
+ .remove = __devexit_p(da9055_onkey_remove),
+ .driver = {
+ .name = "da9055-onkey",
+ .owner = THIS_MODULE,
+ },
+};
+static int __init da9055_onkey_init(void)
+{
+
+ return platform_driver_register(&da9055_onkey_driver);
+
+}
+module_init(da9055_onkey_init);
+
+static void __exit da9055_onkey_exit(void)
+{
+ platform_driver_unregister(&da9055_onkey_driver);
+}
+module_exit(da9055_onkey_exit);
+
+MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
+MODULE_DESCRIPTION("Onkey driver for DA9055");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9055-onkey");
--
1.7.0.4
next reply other threads:[~2012-09-14 13:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-14 13:34 Ashish Jangam [this message]
2012-09-14 13:18 ` [Patch v1 7/7] DA9055 Onkey driver Laxman Dewangan
[not found] <C3AE124F08223B42BC95AEB82F0F6CED32B990D6@KCHJEXMB02.kpit.com>
2012-09-17 12:30 ` Ashish Jangam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1347629677.18587.21.camel@dhruva \
--to=ashish.jangam@kpitcummins.com \
--cc=dchen@diasemi.com \
--cc=linux-input@vger.kernel.org \
--cc=lrg@slimlogic.co.uk \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).