From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hui Wang Subject: [PATCH v4 RESEND 2/3] Input: add devicetree binding note for Date: Wed, 10 Oct 2012 17:12:02 +0800 Message-ID: <1349860323-12786-3-git-send-email-jason77.wang@gmail.com> References: <1349860323-12786-1-git-send-email-jason77.wang@gmail.com> <1349860323-12786-2-git-send-email-jason77.wang@gmail.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Received: from mail.windriver.com ([147.11.1.11]:63551 "EHLO mail.windriver.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751329Ab2JJJMR (ORCPT ); Wed, 10 Oct 2012 05:12:17 -0400 In-Reply-To: <1349860323-12786-2-git-send-email-jason77.wang@gmail.com> Sender: linux-input-owner@vger.kernel.org List-Id: linux-input@vger.kernel.org To: dmitry.torokhov@gmail.com, jiejing.zhang@freescale.com, shawn.guo@linaro.org Cc: linux-input@vger.kernel.org, devicetree-discuss@lists.ozlabs.org The egalax_ts driver needs to get the gpio number of the irq pin, and use this gpio to wake up the controller. So add a note for this change. Ackyed-by Zhang Jiejing Reviewed-by: Shawn Guo Signed-off-by: Hui Wang --- .../bindings/input/touchscreen/egalax-ts.txt | 19 +++++++++++++++++++ 1 files changed, 19 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt new file mode 100644 index 0000000..df70318 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt @@ -0,0 +1,19 @@ +* EETI eGalax Multiple Touch Controller + +Required properties: +- compatible: must be "eeti,egalax_ts" +- reg: i2c slave address +- interrupt-parent: the phandle for the interrupt controller +- interrupts: touch controller interrupt +- wakeup-gpios: the gpio pin to be used for waking up the controller + as well as uased as irq pin + +Example: + + egalax_ts@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 2>; + wakeup-gpios = <&gpio1 9 0>; + }; -- 1.7.6