* [PATCH v4 4/4] input: misc: introduce retu-pwrbutton
[not found] <1353256582-12166-1-git-send-email-aaro.koskinen@iki.fi>
@ 2012-11-18 16:36 ` Aaro Koskinen
2012-11-21 6:59 ` Dmitry Torokhov
0 siblings, 1 reply; 2+ messages in thread
From: Aaro Koskinen @ 2012-11-18 16:36 UTC (permalink / raw)
To: linux-omap, linux-kernel; +Cc: Aaro Koskinen, linux-input, Dmitry Torokhov
Add Retu power button driver.
Cc: linux-input@vger.kernel.org
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/misc/Kconfig | 10 ++++
drivers/input/misc/Makefile | 1 +
drivers/input/misc/retu-pwrbutton.c | 102 +++++++++++++++++++++++++++++++++++
3 files changed, 113 insertions(+)
create mode 100644 drivers/input/misc/retu-pwrbutton.c
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 7c0f1ec..e5be189 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -367,6 +367,16 @@ config INPUT_CM109
To compile this driver as a module, choose M here: the module will be
called cm109.
+config INPUT_RETU_PWRBUTTON
+ tristate "Retu Power button Driver"
+ depends on MFD_RETU
+ help
+ Say Y here if you want to enable power key reporting via the
+ Retu chips found in Nokia Internet Tablets (770, N800, N810).
+
+ To compile this driver as a module, choose M here. The module will
+ be called retu-pwrbutton.
+
config INPUT_TWL4030_PWRBUTTON
tristate "TWL4030 Power button Driver"
depends on TWL4030_CORE
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 83fe6f5..4fbee0d 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY) += pmic8xxx-pwrkey.o
obj-$(CONFIG_INPUT_POWERMATE) += powermate.o
obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o
obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o
+obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o
obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o
obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o
diff --git a/drivers/input/misc/retu-pwrbutton.c b/drivers/input/misc/retu-pwrbutton.c
new file mode 100644
index 0000000..043a12b
--- /dev/null
+++ b/drivers/input/misc/retu-pwrbutton.c
@@ -0,0 +1,102 @@
+/*
+ * Retu power button driver.
+ *
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Original code written by Ari Saastamoinen, Juha Yrjölä and Felipe Balbi.
+ * Rewritten by Aaro Koskinen.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/retu.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#define RETU_STATUS_PWRONX (1 << 5)
+
+static irqreturn_t retu_pwrbutton_irq(int irq, void *_pwr)
+{
+ bool state;
+ struct input_dev *idev = _pwr;
+ struct retu_dev *rdev = input_get_drvdata(idev);
+
+ state = !(retu_read(rdev, RETU_REG_STATUS) & RETU_STATUS_PWRONX);
+ input_report_key(idev, KEY_POWER, state);
+ input_sync(idev);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit retu_pwrbutton_probe(struct platform_device *pdev)
+{
+ struct retu_dev *rdev = dev_get_drvdata(pdev->dev.parent);
+ struct input_dev *idev;
+ int ret;
+
+ idev = input_allocate_device();
+ if (!idev)
+ return -ENOMEM;
+
+ idev->evbit[0] = BIT_MASK(EV_KEY);
+ idev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
+ idev->name = "retu-pwrbutton";
+
+ platform_set_drvdata(pdev, idev);
+ input_set_drvdata(idev, rdev);
+
+ ret = input_register_device(idev);
+ if (ret < 0) {
+ input_free_device(idev);
+ return ret;
+ }
+
+ ret = devm_request_threaded_irq(&pdev->dev, platform_get_irq(pdev, 0),
+ NULL, retu_pwrbutton_irq, 0,
+ "retu-pwrbutton", idev);
+ if (ret < 0)
+ input_unregister_device(idev);
+
+ return ret;
+}
+
+static int __devexit retu_pwrbutton_remove(struct platform_device *pdev)
+{
+ struct input_dev *idev = platform_get_drvdata(pdev);
+
+ disable_irq(platform_get_irq(pdev, 0));
+ input_unregister_device(idev);
+
+ return 0;
+}
+
+static struct platform_driver retu_pwrbutton_driver = {
+ .probe = retu_pwrbutton_probe,
+ .remove = __devexit_p(retu_pwrbutton_remove),
+ .driver = {
+ .name = "retu-pwrbutton",
+ .owner = THIS_MODULE,
+ },
+};
+module_platform_driver(retu_pwrbutton_driver);
+
+MODULE_ALIAS("platform:retu-pwrbutton");
+MODULE_DESCRIPTION("Retu Power Button");
+MODULE_AUTHOR("Ari Saastamoinen");
+MODULE_AUTHOR("Felipe Balbi");
+MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>");
+MODULE_LICENSE("GPL");
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 2+ messages in thread