From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bastian Hecht Subject: [PATCH v2 2/2] ARM: shmobile: Armadillo800EVA: Move st1232 reset pin handling Date: Mon, 8 Apr 2013 14:52:27 +0200 Message-ID: <1365425547-10391-2-git-send-email-hechtb+renesas@gmail.com> References: <1365425547-10391-1-git-send-email-hechtb+renesas@gmail.com> Return-path: In-Reply-To: <1365425547-10391-1-git-send-email-hechtb+renesas@gmail.com> Sender: linux-sh-owner@vger.kernel.org To: linux-sh@vger.kernel.org, linux-input@vger.kernel.org Cc: Tony SIM , Laurent Pichart , Magnus Damm , Simon Horman , Kuninori Morimoto List-Id: linux-input@vger.kernel.org We no longer need to set up the reset pin for the st1232 in the board code, but can pass the GPIO number via the platform data to the driver. This results in a cleaner grouping of the device setup. Signed-off-by: Bastian Hecht --- v2: reset_pin changed to reset_gpio arch/arm/mach-shmobile/board-armadillo800eva.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index bf4c3d2..d1c1ff4 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -997,10 +998,15 @@ static struct platform_device i2c_gpio_device = { }; /* I2C */ +static struct st1232_pdata st1232_i2c0_pdata = { + .reset_gpio = 166, +}; + static struct i2c_board_info i2c0_devices[] = { { I2C_BOARD_INFO("st1232-ts", 0x55), .irq = irq_pin(10), + .platform_data = &st1232_i2c0_pdata, }, { I2C_BOARD_INFO("wm8978", 0x1a), @@ -1120,7 +1126,6 @@ static void __init eva_init(void) /* Touchscreen */ gpio_request(GPIO_FN_IRQ10, NULL); /* TP_INT */ - gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */ /* GETHER */ gpio_request(GPIO_FN_ET_CRS, NULL); -- 1.7.9.5