From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sebastian Andrzej Siewior Subject: [PATCH 15/19] input/ti_am335x_tsc: tiny cleanup Date: Mon, 27 May 2013 21:12:02 +0200 Message-ID: <1369681926-22185-16-git-send-email-bigeasy@linutronix.de> References: <1369681926-22185-1-git-send-email-bigeasy@linutronix.de> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: <1369681926-22185-1-git-send-email-bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org> Sender: linux-iio-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Samuel Ortiz , Jonathan Cameron , Dmitry Torokhov , Felipe Balbi , Sebastian Andrzej Siewior List-Id: linux-input@vger.kernel.org Things that can be done to done without using make up: - reduce config_inp from 20 elements to 4 The loop goes 0=E2=80=A63 so elements 4=E2=80=A619 remain unused. - put the shift for analog_line into one line, since config_inp is u32 = we don't need to worry about sign extension, - check if he DT values are 0=E2=80=A63 as expected - replace "err =3D -EINVAL; goto err" with "return -EINVAL;" as there i= s no cleanup and this is less code - pull out "config[analog_line[i]][0=E2=80=A63];" from the switch case = and use magic to the 0=E2=80=A63 correct. - since we removed so much lines, spent a few to get "config[an_line][wi_order];" done. - get rid of "val32, wires_conf" and assign the values directly. This i= s just init code but we can still save a few cycles. - remove titsc_config_wires() from resume path. ->bit_yn & friends are = only written once and not changed so as long as we assume that our DDR wil= l have no biflips we can skip that. Signed-off-by: Sebastian Andrzej Siewior --- drivers/input/touchscreen/ti_am335x_tsc.c | 124 ++++++++++++---------= -------- 1 file changed, 51 insertions(+), 73 deletions(-) diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/= touchscreen/ti_am335x_tsc.c index 0dbf3df..96accaa 100644 --- a/drivers/input/touchscreen/ti_am335x_tsc.c +++ b/drivers/input/touchscreen/ti_am335x_tsc.c @@ -59,7 +59,7 @@ struct titsc { unsigned int bckup_y; bool pen_down; int steps_to_configure; - int config_inp[20]; + u32 config_inp[4]; int bit_xp, bit_xn, bit_yp, bit_yn; int inp_xp, inp_xn, inp_yp, inp_yn; }; @@ -115,69 +115,54 @@ static int regbit_map(int val) =20 static int titsc_config_wires(struct titsc *ts_dev) { - int analog_line[10], wire_order[10]; - int i, temp_bits, err; + u32 analog_line[4]; + u32 wire_order[4]; + int i, temp_bits; =20 for (i =3D 0; i < 4; i++) { /* * Get the order in which TSC wires are attached * w.r.t. each of the analog input lines on the EVM. */ - analog_line[i] =3D ts_dev->config_inp[i] & 0xF0; - analog_line[i] =3D analog_line[i] >> 4; - + analog_line[i] =3D (ts_dev->config_inp[i] & 0xF0) >> 4; wire_order[i] =3D ts_dev->config_inp[i] & 0x0F; + if (WARN_ON(analog_line[i] > 4)) + return -EINVAL; + if (WARN_ON(wire_order[i] > 4)) + return -EINVAL; } =20 for (i =3D 0; i < 4; i++) { + int an_line; + int wi_order; + + an_line =3D analog_line[i]; + wi_order =3D wire_order[i]; + temp_bits =3D config[an_line][wi_order]; + if (temp_bits =3D=3D 0) + return -EINVAL; switch (wire_order[i]) { case 0: - temp_bits =3D config[analog_line[i]][0]; - if (temp_bits =3D=3D 0) { - err =3D -EINVAL; - goto ret; - } else { - ts_dev->bit_xp =3D regbit_map(temp_bits); - ts_dev->inp_xp =3D analog_line[i]; - break; - } + ts_dev->bit_xp =3D regbit_map(temp_bits); + ts_dev->inp_xp =3D analog_line[i]; + break; + case 1: - temp_bits =3D config[analog_line[i]][1]; - if (temp_bits =3D=3D 0) { - err =3D -EINVAL; - goto ret; - } else { - ts_dev->bit_xn =3D regbit_map(temp_bits); - ts_dev->inp_xn =3D analog_line[i]; - break; - } + ts_dev->bit_xn =3D regbit_map(temp_bits); + ts_dev->inp_xn =3D analog_line[i]; + break; + case 2: - temp_bits =3D config[analog_line[i]][2]; - if (temp_bits =3D=3D 0) { - err =3D -EINVAL; - goto ret; - } else { - ts_dev->bit_yp =3D regbit_map(temp_bits); - ts_dev->inp_yp =3D analog_line[i]; - break; - } + ts_dev->bit_yp =3D regbit_map(temp_bits); + ts_dev->inp_yp =3D analog_line[i]; + break; case 3: - temp_bits =3D config[analog_line[i]][3]; - if (temp_bits =3D=3D 0) { - err =3D -EINVAL; - goto ret; - } else { - ts_dev->bit_yn =3D regbit_map(temp_bits); - ts_dev->inp_yn =3D analog_line[i]; - break; - } + ts_dev->bit_yn =3D regbit_map(temp_bits); + ts_dev->inp_yn =3D analog_line[i]; + break; } } - return 0; - -ret: - return err; } =20 static void titsc_step_config(struct titsc *ts_dev) @@ -319,7 +304,6 @@ static irqreturn_t titsc_irq(int irq, void *dev) unsigned int z1, z2, z; unsigned int fsm; unsigned int diffx =3D 0, diffy =3D 0; - int i; =20 status =3D titsc_readl(ts_dev, REG_IRQSTATUS); if (status & IRQENB_FIFO0THRES) { @@ -387,11 +371,10 @@ static irqreturn_t titsc_irq(int irq, void *dev) } =20 static int titsc_parse_dt(struct ti_tscadc_dev *tscadc_dev, - struct titsc *ts_dev) + struct titsc *ts_dev) { struct device_node *node =3D tscadc_dev->dev->of_node; - int err, i; - u32 val32, wires_conf[4]; + int err; =20 if (!node) return -EINVAL; @@ -399,34 +382,30 @@ static int titsc_parse_dt(struct ti_tscadc_dev *t= scadc_dev, node =3D of_get_child_by_name(node, "tsc"); if (!node) return -EINVAL; - err =3D of_property_read_u32(node, "ti,wires", &val32); + err =3D of_property_read_u32(node, "ti,wires", &ts_dev->wires); if (err < 0) - goto error_ret; - ts_dev->wires =3D val32; - - err =3D of_property_read_u32(node, - "ti,x-plate-resistance", &val32); - if (err < 0) - goto error_ret; - ts_dev->x_plate_resistance =3D val32; + return err; + switch (ts_dev->wires) { + case 4: + case 5: + case 8: + break; + default: + return -EINVAL; + } =20 - err =3D of_property_read_u32(node, - "ti,steps-to-configure", &val32); + err =3D of_property_read_u32(node, "ti,x-plate-resistance", + &ts_dev->x_plate_resistance); if (err < 0) - goto error_ret; - ts_dev->steps_to_configure =3D val32; + return err; =20 - err =3D of_property_read_u32_array(node, "ti,wire-config", - wires_conf, ARRAY_SIZE(wires_conf)); + err =3D of_property_read_u32(node, "ti,steps-to-configure", + &ts_dev->steps_to_configure); if (err < 0) - goto error_ret; + return err; =20 - for (i =3D 0; i < ARRAY_SIZE(wires_conf); i++) - ts_dev->config_inp[i] =3D wires_conf[i]; - return 0; - -error_ret: - return err; + return of_property_read_u32_array(node, "ti,wire-config", + ts_dev->config_inp, ARRAY_SIZE(ts_dev->config_inp)); } =20 /* @@ -545,7 +524,6 @@ static int titsc_resume(struct device *dev) 0x00); titsc_writel(ts_dev, REG_IRQCLR, IRQENB_HW_PEN); } - titsc_config_wires(ts_dev); titsc_step_config(ts_dev); titsc_writel(ts_dev, REG_FIFO0THR, ts_dev->steps_to_configure); --=20 1.7.10.4