From: Sebastian Andrzej Siewior <bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
To: Samuel Ortiz <sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Cc: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>,
linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Dmitry Torokhov
<dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Jonathan Cameron <jic23-KWPb1pKIrIJaa/9Udqfwiw@public.gmane.org>,
Sebastian Andrzej Siewior
<bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
Subject: [PATCH 01/22] mfd/ti_am335x_tscadc: remove regmap
Date: Wed, 5 Jun 2013 18:24:34 +0200 [thread overview]
Message-ID: <1370449495-29981-2-git-send-email-bigeasy@linutronix.de> (raw)
In-Reply-To: <1370449495-29981-1-git-send-email-bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
The MFD part uses regmap without caching and is the only user of the
regmap. The child drivers, that is input(touch) and iio(adc), use direct
reg access.
There is a patch which converts them to use regmap as well but I see no
benefit at all doing this. There is a direct MMIO bus access with no
need to cache values like for I2C or SPI devices. Furthermore, most (if
not all) of the access done by the touch & ADC driver read volatile
register.
Therefore this patch removes regmap part of the driver.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
---
drivers/mfd/ti_am335x_tscadc.c | 23 ++---------------------
include/linux/mfd/ti_am335x_tscadc.h | 1 -
2 files changed, 2 insertions(+), 22 deletions(-)
diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index e9f3fb5..804e61e 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -19,7 +19,6 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/clk.h>
-#include <linux/regmap.h>
#include <linux/mfd/core.h>
#include <linux/pm_runtime.h>
@@ -29,25 +28,15 @@
static unsigned int tscadc_readl(struct ti_tscadc_dev *tsadc, unsigned int reg)
{
- unsigned int val;
-
- regmap_read(tsadc->regmap_tscadc, reg, &val);
- return val;
+ return readl(tsadc->tscadc_base + reg);
}
static void tscadc_writel(struct ti_tscadc_dev *tsadc, unsigned int reg,
unsigned int val)
{
- regmap_write(tsadc->regmap_tscadc, reg, val);
+ writel(val, tsadc->tscadc_base + reg);
}
-static const struct regmap_config tscadc_regmap_config = {
- .name = "ti_tscadc",
- .reg_bits = 32,
- .reg_stride = 4,
- .val_bits = 32,
-};
-
static void tscadc_idle_config(struct ti_tscadc_dev *config)
{
unsigned int idleconfig;
@@ -121,14 +110,6 @@ static int ti_tscadc_probe(struct platform_device *pdev)
return -ENOMEM;
}
- tscadc->regmap_tscadc = devm_regmap_init_mmio(&pdev->dev,
- tscadc->tscadc_base, &tscadc_regmap_config);
- if (IS_ERR(tscadc->regmap_tscadc)) {
- dev_err(&pdev->dev, "regmap init failed\n");
- err = PTR_ERR(tscadc->regmap_tscadc);
- goto ret;
- }
-
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index c79ad5d..dc75c34 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -137,7 +137,6 @@ struct mfd_tscadc_board {
struct ti_tscadc_dev {
struct device *dev;
- struct regmap *regmap_tscadc;
void __iomem *tscadc_base;
int irq;
struct mfd_cell cells[TSCADC_CELLS];
--
1.7.10.4
next prev parent reply other threads:[~2013-06-05 16:24 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-05 16:24 AM335x tsc & adc, dt + cleanup take 3 Sebastian Andrzej Siewior
2013-06-05 16:24 ` [PATCH 03/22] input/ti_am33x_tsc: Step enable bits made configurable Sebastian Andrzej Siewior
2013-06-05 16:24 ` [PATCH 05/22] input/ti_am33x_tsc: remove unwanted fifo flush Sebastian Andrzej Siewior
2013-06-05 16:24 ` [PATCH 09/22] iio/ti_am335x_adc: remove platform_data support Sebastian Andrzej Siewior
2013-06-05 16:24 ` [PATCH 10/22] mfd/ti_am335x_tscadc: Add DT support Sebastian Andrzej Siewior
2013-06-05 16:24 ` [PATCH 11/22] mfd/ti_am335x_tscadc: remove platform_data support Sebastian Andrzej Siewior
2013-06-05 16:24 ` [PATCH 12/22] iio/ti_tscadc: Update with IIO map interface Sebastian Andrzej Siewior
[not found] ` <1370449495-29981-13-git-send-email-bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
2013-06-08 9:18 ` Jonathan Cameron
2013-06-09 16:41 ` Lars-Peter Clausen
2013-06-10 7:40 ` Sebastian Andrzej Siewior
[not found] ` <51B582D3.1050501-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
2013-06-10 8:10 ` Pantelis Antoniou
2013-06-10 8:32 ` Lars-Peter Clausen
[not found] ` <51B58F39.7020405-Qo5EllUWu/uELgA04lAiVw@public.gmane.org>
2013-06-10 8:33 ` Pantelis Antoniou
2013-06-10 8:38 ` Lars-Peter Clausen
[not found] ` <51B59071.9090908-Qo5EllUWu/uELgA04lAiVw@public.gmane.org>
2013-06-10 9:15 ` Sebastian Andrzej Siewior
2013-06-10 16:27 ` Sebastian Andrzej Siewior
2013-06-05 16:24 ` [PATCH 13/22] mfd/ti_tscadc: deal with partial activation Sebastian Andrzej Siewior
2013-06-05 16:24 ` [PATCH 15/22] input & mfd: ti_am335x_tsc remove remaining platform data pieces Sebastian Andrzej Siewior
[not found] ` <1370449495-29981-1-git-send-email-bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
2013-06-05 16:24 ` Sebastian Andrzej Siewior [this message]
2013-06-05 16:24 ` [PATCH 02/22] mfd & input & iio/ti_am335x_adc: use one structure for ti_tscadc_dev Sebastian Andrzej Siewior
2013-06-05 16:24 ` [PATCH 04/22] input/ti_am33x_tsc: Order of TSC wires, made configurable Sebastian Andrzej Siewior
2013-06-05 16:24 ` [PATCH 06/22] input/ti_am33x_tsc: Add DT support Sebastian Andrzej Siewior
2013-06-05 16:24 ` [PATCH 07/22] input/ti_am33x_tsc: remove platform_data support Sebastian Andrzej Siewior
2013-06-05 16:24 ` [PATCH 08/22] iio/ti_am335x_adc: Add DT support Sebastian Andrzej Siewior
2013-06-05 16:24 ` [PATCH 14/22] arm/am33xx: add TSC/ADC mfd device support Sebastian Andrzej Siewior
2013-06-05 16:24 ` [PATCH 16/22] mfd & input/ti_am335x_tsc: rename device from tsc to TI-am335x-tsc Sebastian Andrzej Siewior
2013-06-05 16:24 ` [PATCH 17/22] mfd & iio/ti_am335x_adc: rename device from tiadc to TI-am335x-adc Sebastian Andrzej Siewior
[not found] ` <1370449495-29981-18-git-send-email-bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
2013-06-08 9:19 ` Jonathan Cameron
2013-06-05 16:24 ` [PATCH 18/22] input/ti_am335x_adc: use only FIFO0 and clean up a little Sebastian Andrzej Siewior
2013-06-05 16:24 ` [PATCH 19/22] input/ti_am335x_tsc: ACK the HW_PEN irq in ISR Sebastian Andrzej Siewior
2013-06-05 16:24 ` [PATCH 20/22] input/ti_am335x_tsc: return IRQ_NONE if there was no IRQ for us Sebastian Andrzej Siewior
2013-06-05 16:24 ` [PATCH 21/22] iio/ti_am335x_adc: Allow to specify input line Sebastian Andrzej Siewior
[not found] ` <1370449495-29981-22-git-send-email-bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
2013-06-08 9:24 ` Jonathan Cameron
[not found] ` <51B2F85E.2080805-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2013-06-10 7:32 ` Sebastian Andrzej Siewior
2013-06-09 16:52 ` Lars-Peter Clausen
[not found] ` <51B4B2CE.3020300-Qo5EllUWu/uELgA04lAiVw@public.gmane.org>
2013-06-11 7:55 ` Sebastian Andrzej Siewior
2013-06-05 16:24 ` [PATCH 22/22] iio/ti_am335x_adc: check if we found the value Sebastian Andrzej Siewior
-- strict thread matches above, loose matches on Subject: below --
2013-06-11 11:30 am335x: TSC & ADC reworking including DT pieces, take 4 Sebastian Andrzej Siewior
2013-06-11 11:30 ` [PATCH 01/22] mfd/ti_am335x_tscadc: remove regmap Sebastian Andrzej Siewior
2013-06-11 14:23 ` Samuel Ortiz
2013-06-11 14:34 ` Sebastian Andrzej Siewior
[not found] ` <51B7358D.7000605-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
2013-06-14 13:53 ` Mark Brown
[not found] ` <20130614135358.GR1403-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2013-06-17 11:41 ` Sebastian Andrzej Siewior
[not found] ` <51BEF5F4.4090600-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
2013-06-17 16:03 ` Mark Brown
2013-07-04 9:02 ` Sebastian Andrzej Siewior
2013-07-04 10:45 ` Mark Brown
[not found] ` <20130704104511.GU27646-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2013-07-04 11:15 ` Sebastian Andrzej Siewior
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1370449495-29981-2-git-send-email-bigeasy@linutronix.de \
--to=bigeasy-hfztesqfncyowbw4kg4ksq@public.gmane.org \
--cc=balbi-l0cyMroinI0@public.gmane.org \
--cc=dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=jic23-KWPb1pKIrIJaa/9Udqfwiw@public.gmane.org \
--cc=linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).