From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
To: Lee Jones <lee.jones@linaro.org>, Samuel Ortiz <sameo@linux.intel.com>
Cc: "Benoît Cousson" <b-cousson@ti.com>,
"Tony Lindgren" <tony@atomide.com>,
"Jonathan Cameron" <jic23@cam.ac.uk>,
"Dmitry Torokhov" <dmitry.torokhov@gmail.com>,
"Felipe Balbi" <balbi@ti.com>,
linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
linux-iio@vger.kernel.org, linux-input@vger.kernel.org,
"Sebastian Andrzej Siewior" <bigeasy@linutronix.de>
Subject: [PATCH 02/22] mfd & input & iio/ti_am335x_adc: use one structure for ti_tscadc_dev
Date: Tue, 11 Jun 2013 13:30:48 +0200 [thread overview]
Message-ID: <1370950268-7224-3-git-send-email-bigeasy@linutronix.de> (raw)
In-Reply-To: <1370950268-7224-1-git-send-email-bigeasy@linutronix.de>
The mfd driver creates platform data for the child devices and it is the
ti_tscadc_dev struct. This struct is copied for the two devices.
The copy of the structure makes a common lock in this structure a little
less usefull. Therefore the platform data is not a pointer to the
structure and the same structure is used.
While doing the change I noticed that the suspend/resume code assumes
the wrong pointer for ti_tscadc_dev and this has been fixed as well.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
drivers/iio/adc/ti_am335x_adc.c | 5 +++--
drivers/input/touchscreen/ti_am335x_tsc.c | 16 +++++++++-------
drivers/mfd/ti_am335x_tscadc.c | 8 ++++----
include/linux/mfd/ti_am335x_tscadc.h | 7 +++++++
4 files changed, 23 insertions(+), 13 deletions(-)
diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index 5f9a7e7..9db352e 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -140,7 +140,7 @@ static int tiadc_probe(struct platform_device *pdev)
{
struct iio_dev *indio_dev;
struct tiadc_device *adc_dev;
- struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
+ struct ti_tscadc_dev *tscadc_dev = ti_tscadc_dev_get(pdev);
struct mfd_tscadc_board *pdata;
int err;
@@ -205,9 +205,10 @@ static int tiadc_suspend(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct tiadc_device *adc_dev = iio_priv(indio_dev);
- struct ti_tscadc_dev *tscadc_dev = dev->platform_data;
+ struct ti_tscadc_dev *tscadc_dev;
unsigned int idle;
+ tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
if (!device_may_wakeup(tscadc_dev->dev)) {
idle = tiadc_readl(adc_dev, REG_CTRL);
idle &= ~(CNTRLREG_TSCSSENB);
diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
index 51e7b87..16077d3 100644
--- a/drivers/input/touchscreen/ti_am335x_tsc.c
+++ b/drivers/input/touchscreen/ti_am335x_tsc.c
@@ -262,7 +262,7 @@ static int titsc_probe(struct platform_device *pdev)
{
struct titsc *ts_dev;
struct input_dev *input_dev;
- struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
+ struct ti_tscadc_dev *tscadc_dev = ti_tscadc_dev_get(pdev);
struct mfd_tscadc_board *pdata;
int err;
@@ -329,8 +329,8 @@ static int titsc_probe(struct platform_device *pdev)
static int titsc_remove(struct platform_device *pdev)
{
- struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
- struct titsc *ts_dev = tscadc_dev->tsc;
+ struct titsc *ts_dev = platform_get_drvdata(pdev);
+ u32 steps;
free_irq(ts_dev->irq, ts_dev);
@@ -344,10 +344,11 @@ static int titsc_remove(struct platform_device *pdev)
#ifdef CONFIG_PM
static int titsc_suspend(struct device *dev)
{
- struct ti_tscadc_dev *tscadc_dev = dev->platform_data;
- struct titsc *ts_dev = tscadc_dev->tsc;
+ struct titsc *ts_dev = dev_get_drvdata(dev);
+ struct ti_tscadc_dev *tscadc_dev;
unsigned int idle;
+ tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
if (device_may_wakeup(tscadc_dev->dev)) {
idle = titsc_readl(ts_dev, REG_IRQENABLE);
titsc_writel(ts_dev, REG_IRQENABLE,
@@ -359,9 +360,10 @@ static int titsc_suspend(struct device *dev)
static int titsc_resume(struct device *dev)
{
- struct ti_tscadc_dev *tscadc_dev = dev->platform_data;
- struct titsc *ts_dev = tscadc_dev->tsc;
+ struct titsc *ts_dev = dev_get_drvdata(dev);
+ struct ti_tscadc_dev *tscadc_dev;
+ tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
if (device_may_wakeup(tscadc_dev->dev)) {
titsc_writel(ts_dev, REG_IRQWAKEUP,
0x00);
diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 804e61e..490b2bd 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -157,14 +157,14 @@ static int ti_tscadc_probe(struct platform_device *pdev)
/* TSC Cell */
cell = &tscadc->cells[TSC_CELL];
cell->name = "tsc";
- cell->platform_data = tscadc;
- cell->pdata_size = sizeof(*tscadc);
+ cell->platform_data = &tscadc;
+ cell->pdata_size = sizeof(tscadc);
/* ADC Cell */
cell = &tscadc->cells[ADC_CELL];
cell->name = "tiadc";
- cell->platform_data = tscadc;
- cell->pdata_size = sizeof(*tscadc);
+ cell->platform_data = &tscadc;
+ cell->pdata_size = sizeof(tscadc);
err = mfd_add_devices(&pdev->dev, pdev->id, tscadc->cells,
TSCADC_CELLS, NULL, 0, NULL);
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index dc75c34..5e430fe 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -148,4 +148,11 @@ struct ti_tscadc_dev {
struct adc_device *adc;
};
+static inline struct ti_tscadc_dev *ti_tscadc_dev_get(struct platform_device *p)
+{
+ struct ti_tscadc_dev **tscadc_dev = p->dev.platform_data;
+
+ return *tscadc_dev;
+}
+
#endif
--
1.7.10.4
next prev parent reply other threads:[~2013-06-11 11:31 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-11 11:30 am335x: TSC & ADC reworking including DT pieces, take 4 Sebastian Andrzej Siewior
2013-06-11 11:30 ` [PATCH 01/22] mfd/ti_am335x_tscadc: remove regmap Sebastian Andrzej Siewior
2013-06-11 14:23 ` Samuel Ortiz
2013-06-11 14:34 ` Sebastian Andrzej Siewior
[not found] ` <51B7358D.7000605-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
2013-06-14 13:53 ` Mark Brown
[not found] ` <20130614135358.GR1403-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2013-06-17 11:41 ` Sebastian Andrzej Siewior
[not found] ` <51BEF5F4.4090600-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
2013-06-17 16:03 ` Mark Brown
2013-07-04 9:02 ` Sebastian Andrzej Siewior
2013-07-04 10:45 ` Mark Brown
[not found] ` <20130704104511.GU27646-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2013-07-04 11:15 ` Sebastian Andrzej Siewior
2013-06-11 11:30 ` Sebastian Andrzej Siewior [this message]
2013-06-11 11:30 ` [PATCH 03/22] input/ti_am33x_tsc: Step enable bits made configurable Sebastian Andrzej Siewior
2013-06-11 11:30 ` [PATCH 04/22] input/ti_am33x_tsc: Order of TSC wires, " Sebastian Andrzej Siewior
[not found] ` <1370950268-7224-5-git-send-email-bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
2013-06-11 14:23 ` Samuel Ortiz
2013-06-11 14:35 ` Sebastian Andrzej Siewior
2013-07-04 11:14 ` Sekhar Nori
[not found] ` <51D5592F.6050208-l0cyMroinI0@public.gmane.org>
2013-07-04 11:33 ` Sebastian Andrzej Siewior
[not found] ` <51D55D80.6080803-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
2013-07-04 13:39 ` Sekhar Nori
2013-07-04 13:50 ` Sebastian Andrzej Siewior
2013-07-04 14:27 ` Sekhar Nori
2013-06-11 11:30 ` [PATCH 05/22] input/ti_am33x_tsc: remove unwanted fifo flush Sebastian Andrzej Siewior
[not found] ` <1370950268-7224-1-git-send-email-bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
2013-06-11 11:30 ` [PATCH 06/22] input/ti_am33x_tsc: Add DT support Sebastian Andrzej Siewior
2013-06-11 11:31 ` [PATCH 17/22] mfd & iio/ti_am335x_adc: rename device from tiadc to TI-am335x-adc Sebastian Andrzej Siewior
2013-06-11 12:05 ` am335x: TSC & ADC reworking including DT pieces, take 4 Lee Jones
2013-06-11 13:53 ` Lars-Peter Clausen
2013-06-11 11:30 ` [PATCH 07/22] input/ti_am33x_tsc: remove platform_data support Sebastian Andrzej Siewior
2013-06-11 11:30 ` [PATCH 08/22] iio/ti_am335x_adc: Add DT support Sebastian Andrzej Siewior
2013-06-11 11:30 ` [PATCH 09/22] iio/ti_am335x_adc: remove platform_data support Sebastian Andrzej Siewior
2013-06-11 11:30 ` [PATCH 10/22] mfd/ti_am335x_tscadc: Add DT support Sebastian Andrzej Siewior
2013-06-11 14:23 ` Samuel Ortiz
2013-06-11 14:42 ` Sebastian Andrzej Siewior
2013-06-11 15:05 ` Samuel Ortiz
2013-06-11 15:41 ` Sebastian Andrzej Siewior
2013-06-11 18:42 ` Lee Jones
[not found] ` <51B73756.5010004-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
2013-06-11 17:10 ` Lee Jones
2013-06-11 11:30 ` [PATCH 11/22] mfd/ti_am335x_tscadc: remove platform_data support Sebastian Andrzej Siewior
2013-06-11 11:30 ` [PATCH 12/22] iio/ti_tscadc: provide datasheet_name and scan_type Sebastian Andrzej Siewior
2013-06-11 11:30 ` [PATCH 13/22] mfd/ti_tscadc: deal with partial activation Sebastian Andrzej Siewior
2013-06-11 11:31 ` [PATCH 14/22] arm/am33xx: add TSC/ADC mfd device support Sebastian Andrzej Siewior
[not found] ` <1370950268-7224-15-git-send-email-bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
2013-07-04 13:49 ` Sekhar Nori
[not found] ` <51D57D4F.30905-l0cyMroinI0@public.gmane.org>
2013-07-04 13:51 ` Sebastian Andrzej Siewior
2013-06-11 11:31 ` [PATCH 15/22] input & mfd: ti_am335x_tsc remove remaining platform data pieces Sebastian Andrzej Siewior
2013-06-11 11:31 ` [PATCH 16/22] mfd & input/ti_am335x_tsc: rename device from tsc to TI-am335x-tsc Sebastian Andrzej Siewior
2013-06-11 11:31 ` [PATCH 18/22] input/ti_am335x_adc: use only FIFO0 and clean up a little Sebastian Andrzej Siewior
2013-06-11 11:31 ` [PATCH 19/22] input/ti_am335x_tsc: ACK the HW_PEN irq in ISR Sebastian Andrzej Siewior
2013-06-11 11:31 ` [PATCH 20/22] input/ti_am335x_tsc: return IRQ_NONE if there was no IRQ for us Sebastian Andrzej Siewior
2013-06-11 11:31 ` [PATCH 21/22] iio/ti_am335x_adc: Allow to specify input line Sebastian Andrzej Siewior
2013-06-11 11:31 ` [PATCH 22/22] iio/ti_am335x_adc: check if we found the value Sebastian Andrzej Siewior
2013-06-11 14:23 ` am335x: TSC & ADC reworking including DT pieces, take 4 Samuel Ortiz
2013-06-11 15:29 ` Sebastian Andrzej Siewior
[not found] ` <51B74252.5090906-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
2013-06-11 16:10 ` Samuel Ortiz
2013-06-11 16:18 ` Sebastian Andrzej Siewior
2013-06-14 13:57 ` Mark Brown
2013-06-11 16:04 ` Dmitry Torokhov
[not found] ` <20130611160415.GA379-WlK9ik9hQGAhIp7JRqBPierSzoNAToWh@public.gmane.org>
2013-06-11 16:15 ` Samuel Ortiz
2013-06-11 16:27 ` Jonathan Cameron
[not found] ` <1565f2fb-7f16-4910-8fa2-cd5700e8986d-2ueSQiBKiTY7tOexoI0I+QC/G2K4zDHf@public.gmane.org>
2013-06-11 17:01 ` Lars-Peter Clausen
2013-06-11 17:55 ` Samuel Ortiz
2013-06-12 13:29 ` Sebastian Andrzej Siewior
[not found] ` <51B877C7.8080001-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
2013-06-12 13:50 ` Samuel Ortiz
2013-06-12 14:02 ` Sebastian Andrzej Siewior
2013-06-12 14:41 ` Samuel Ortiz
2013-06-12 15:00 ` Sebastian Andrzej Siewior
2013-06-11 18:02 ` Jonathan Cameron
-- strict thread matches above, loose matches on Subject: below --
2013-06-05 16:24 AM335x tsc & adc, dt + cleanup take 3 Sebastian Andrzej Siewior
[not found] ` <1370449495-29981-1-git-send-email-bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
2013-06-05 16:24 ` [PATCH 02/22] mfd & input & iio/ti_am335x_adc: use one structure for ti_tscadc_dev Sebastian Andrzej Siewior
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1370950268-7224-3-git-send-email-bigeasy@linutronix.de \
--to=bigeasy@linutronix.de \
--cc=b-cousson@ti.com \
--cc=balbi@ti.com \
--cc=dmitry.torokhov@gmail.com \
--cc=jic23@cam.ac.uk \
--cc=lee.jones@linaro.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=sameo@linux.intel.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).