linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Nick Dyer <nick.dyer@itdev.co.uk>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Daniel Kurtz <djkurtz@chromium.org>,
	Henrik Rydberg <rydberg@euromail.se>,
	Joonyoung Shim <jy0922.shim@samsung.com>,
	Alan Bowens <Alan.Bowens@atmel.com>,
	linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
	Peter Meerwald <pmeerw@pmeerw.net>,
	Benson Leung <bleung@chromium.org>,
	Olof Johansson <olofj@chromium.org>,
	Nick Dyer <nick.dyer@itdev.co.uk>
Subject: [PATCH 09/51] Input: atmel_mxt_ts - Make wait-after-reset period compatible with all chips
Date: Thu, 27 Jun 2013 13:48:44 +0100	[thread overview]
Message-ID: <1372337366-9286-10-git-send-email-nick.dyer@itdev.co.uk> (raw)
In-Reply-To: <1372337366-9286-1-git-send-email-nick.dyer@itdev.co.uk>

From: Iiro Valkonen <iiro.valkonen@atmel.com>

The delay before the chip can be accessed after reset varies between different
chips in maXTouch family. Waiting for an interrupt and a T6 status message
with the RESET bit set is a better behaviour.

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
---
 drivers/input/touchscreen/atmel_mxt_ts.c |  109 ++++++++++++++++++++++++------
 1 file changed, 87 insertions(+), 22 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 1e24e54..11ee78a 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -88,6 +88,9 @@
 #define MXT_COMMAND_REPORTALL	3
 #define MXT_COMMAND_DIAGNOSTIC	5
 
+/* Define for T6 status byte */
+#define MXT_T6_STATUS_RESET	(1 << 7)
+
 /* MXT_GEN_POWER_T7 field */
 #define MXT_POWER_IDLEACQINT	0
 #define MXT_POWER_ACTVACQINT	1
@@ -179,9 +182,13 @@
 
 /* Define for MXT_GEN_COMMAND_T6 */
 #define MXT_BOOT_VALUE		0xa5
+#define MXT_RESET_VALUE		0x01
 #define MXT_BACKUP_VALUE	0x55
+
+/* Delay times */
 #define MXT_BACKUP_TIME		50	/* msec */
 #define MXT_RESET_TIME		200	/* msec */
+#define MXT_RESET_TIMEOUT	3000	/* msec */
 #define MXT_FW_RESET_TIME	3000	/* msec */
 #define MXT_FW_CHG_TIMEOUT	300	/* msec */
 
@@ -256,6 +263,7 @@ struct mxt_data {
 
 	/* Cached parameters from object table */
 	u8 T6_reportid;
+	u16 T6_address;
 	u8 T9_reportid_min;
 	u8 T9_reportid_max;
 	u8 T19_reportid;
@@ -263,6 +271,9 @@ struct mxt_data {
 	/* for fw update in bootloader */
 	struct completion bl_completion;
 
+	/* for reset handling */
+	struct completion reset_completion;
+
 	/* Enable reporting of input events */
 	bool enable_reporting;
 };
@@ -348,10 +359,10 @@ static void mxt_dump_message(struct device *dev,
 		message->reportid, 7, message->message);
 }
 
-static int mxt_wait_for_chg(struct mxt_data *data, unsigned int timeout_ms)
+static int mxt_wait_for_completion(struct mxt_data *data,
+			struct completion *comp, unsigned int timeout_ms)
 {
 	struct device *dev = &data->client->dev;
-	struct completion *comp = &data->bl_completion;
 	unsigned long timeout = msecs_to_jiffies(timeout_ms);
 	long ret;
 
@@ -380,7 +391,8 @@ recheck:
 		 * CHG assertion before reading the status byte.
 		 * Once the status byte has been read, the line is deasserted.
 		 */
-		ret = mxt_wait_for_chg(data, MXT_FW_CHG_TIMEOUT);
+		ret = mxt_wait_for_completion(data, &data->bl_completion,
+					      MXT_FW_CHG_TIMEOUT);
 		if (ret) {
 			/*
 			 * TODO: handle -EINTR better by terminating fw update
@@ -667,6 +679,9 @@ static irqreturn_t mxt_process_messages_until_invalid(struct mxt_data *data)
 			unsigned csum = mxt_extract_T6_csum(&payload[1]);
 			dev_dbg(dev, "Status: %02x Config Checksum: %06x\n",
 				status, csum);
+
+			if (status & MXT_T6_STATUS_RESET)
+				complete(&data->reset_completion);
 		} else if (mxt_is_T9_message(data, &message)) {
 			int id = reportid - data->T9_reportid_min;
 			mxt_input_touchevent(data, &message, id);
@@ -703,6 +718,59 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id)
 	return mxt_process_messages_until_invalid(data);
 }
 
+static int mxt_t6_command(struct mxt_data *data, u16 cmd_offset,
+			  u8 value, bool wait)
+{
+	u16 reg;
+	u8 command_register;
+	int timeout_counter = 0;
+	int ret;
+
+	reg = data->T6_address + cmd_offset;
+
+	ret = mxt_write_reg(data->client, reg, value);
+	if (ret)
+		return ret;
+
+	if (!wait)
+		return 0;
+
+	do {
+		msleep(20);
+		ret = __mxt_read_reg(data->client, reg, 1, &command_register);
+		if (ret)
+			return ret;
+	} while ((command_register != 0) && (timeout_counter++ <= 100));
+
+	if (timeout_counter > 100) {
+		dev_err(&data->client->dev, "Command failed!\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int mxt_soft_reset(struct mxt_data *data)
+{
+	struct device *dev = &data->client->dev;
+	int ret = 0;
+
+	dev_info(dev, "Resetting chip\n");
+
+	INIT_COMPLETION(data->reset_completion);
+
+	ret = mxt_t6_command(data, MXT_COMMAND_RESET, MXT_RESET_VALUE, false);
+	if (ret)
+		return ret;
+
+	ret = mxt_wait_for_completion(data, &data->reset_completion,
+				      MXT_RESET_TIMEOUT);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
 static int mxt_check_reg_init(struct mxt_data *data)
 {
 	const struct mxt_platform_data *pdata = data->pdata;
@@ -829,6 +897,7 @@ static int mxt_get_object_table(struct mxt_data *data)
 		switch (object->type) {
 		case MXT_GEN_COMMAND_T6:
 			data->T6_reportid = min_id;
+			data->T6_address = object->start_address;
 			break;
 		case MXT_TOUCH_MULTI_T9:
 			data->T9_reportid_min = min_id;
@@ -887,16 +956,10 @@ static int mxt_initialize(struct mxt_data *data)
 	if (error)
 		goto err_free_object_table;
 
-	/* Backup to memory */
-	mxt_write_object(data, MXT_GEN_COMMAND_T6,
-			MXT_COMMAND_BACKUPNV,
-			MXT_BACKUP_VALUE);
-	msleep(MXT_BACKUP_TIME);
-
-	/* Soft reset */
-	mxt_write_object(data, MXT_GEN_COMMAND_T6,
-			MXT_COMMAND_RESET, 1);
-	msleep(MXT_RESET_TIME);
+	error = mxt_t6_command(data, MXT_COMMAND_BACKUPNV,
+			       MXT_BACKUP_VALUE, false);
+	if (!error)
+		mxt_soft_reset(data);
 
 	/* Update matrix size at info struct */
 	error = mxt_read_reg(client, MXT_MATRIX_X_SIZE, &val);
@@ -1040,8 +1103,10 @@ static int mxt_load_fw(struct device *dev, const char *fn)
 	/* Change to the bootloader mode */
 	data->in_bootloader = true;
 
-	mxt_write_object(data, MXT_GEN_COMMAND_T6,
-			MXT_COMMAND_RESET, MXT_BOOT_VALUE);
+	ret = mxt_t6_command(data, MXT_COMMAND_RESET, MXT_BOOT_VALUE, false);
+	if (ret)
+		goto release_firmware;
+
 	msleep(MXT_RESET_TIME);
 
 	/* Change to slave address of bootloader */
@@ -1084,18 +1149,21 @@ static int mxt_load_fw(struct device *dev, const char *fn)
 	}
 
 	/* Wait for flash. */
-	ret = mxt_wait_for_chg(data, MXT_FW_RESET_TIME);
+	ret = mxt_wait_for_completion(data, &data->bl_completion,
+				MXT_FW_RESET_TIME);
 	if (ret)
 		goto disable_irq;
 
 	/* Wait for device to reset. Some bootloader versions do not assert
 	 * the CHG line after bootloading has finished, so ignore error */
-	mxt_wait_for_chg(data, MXT_FW_RESET_TIME);
+	mxt_wait_for_completion(data, &data->bl_completion,
+				MXT_FW_RESET_TIME);
 
 	data->in_bootloader = false;
 
 disable_irq:
 	disable_irq(data->irq);
+release_firmware:
 	release_firmware(fw);
 
 	/* Change to slave address of application */
@@ -1216,6 +1284,7 @@ static int mxt_probe(struct i2c_client *client,
 	data->irq = client->irq;
 
 	init_completion(&data->bl_completion);
+	init_completion(&data->reset_completion);
 
 	mxt_calc_resolution(data);
 
@@ -1341,11 +1410,7 @@ static int mxt_resume(struct device *dev)
 	struct mxt_data *data = i2c_get_clientdata(client);
 	struct input_dev *input_dev = data->input_dev;
 
-	/* Soft reset */
-	mxt_write_object(data, MXT_GEN_COMMAND_T6,
-			MXT_COMMAND_RESET, 1);
-
-	msleep(MXT_RESET_TIME);
+	mxt_soft_reset(data);
 
 	mutex_lock(&input_dev->mutex);
 
-- 
1.7.10.4

  parent reply	other threads:[~2013-06-27 12:48 UTC|newest]

Thread overview: 87+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-27 12:48 Atmel updates to atmel_mxt_ts touch controller driver - v6 Nick Dyer
2013-06-27 12:48 ` [PATCH 01/51] Input: atmel_mxt_ts - Remove unnecessary platform data Nick Dyer
2013-06-27 12:48 ` [PATCH 02/51] Input: atmel_mxt_ts - Improve T19 GPIO keys handling Nick Dyer
2013-07-18 17:11   ` rydberg
2013-06-27 12:48 ` [PATCH 03/51] Input: atmel_mxt_ts - Return IRQ_NONE when interrupt handler fails Nick Dyer
2013-06-27 12:48 ` [PATCH 04/51] Input: atmel_mxt_ts - define helper functions for size and instances Nick Dyer
2013-06-27 12:48 ` [PATCH 05/51] Input: atmel_mxt_ts - Select FW_LOADER for firmware code Nick Dyer
2013-06-27 12:48 ` [PATCH 06/51] Input: atmel_mxt_ts - wait for CHG assert in mxt_check_bootloader Nick Dyer
2013-06-27 12:48 ` [PATCH 07/51] Input: atmel_mxt_ts - wait for CHG after bootloader resets Nick Dyer
2013-06-27 12:48 ` [PATCH 08/51] Input: atmel_mxt_ts - Initialise IRQ before probing Nick Dyer
2013-07-18 17:13   ` rydberg
2013-06-27 12:48 ` Nick Dyer [this message]
2013-06-27 12:48 ` [PATCH 10/51] Input: atmel_mxt_ts - Improve error reporting and debug Nick Dyer
2013-06-27 12:48 ` [PATCH 11/51] Input: atmel_mxt_ts - Implement CRC check for configuration data Nick Dyer
2013-09-18 16:59   ` [11/51] " Martin Fuzzey
2013-06-27 12:48 ` [PATCH 12/51] Input: atmel_mxt_ts - Download device config using firmware loader Nick Dyer
2013-09-18 17:08   ` [12/51] " Martin Fuzzey
2013-06-27 12:48 ` [PATCH 13/51] Input: atmel_mxt_ts - Calculate and check CRC in config file Nick Dyer
2013-06-27 12:48 ` [PATCH 14/51] Input: atmel_mxt_ts - Add additional bootloader addresses Nick Dyer
2013-06-27 12:48 ` [PATCH 15/51] Input: atmel_mxt_ts - Read and report bootloader version Nick Dyer
2013-06-27 12:48 ` [PATCH 16/51] Input: atmel_mxt_ts - Implement bootloader frame retries Nick Dyer
2013-06-27 12:48 ` [PATCH 17/51] Input: atmel_mxt_ts - Improve bootloader progress output Nick Dyer
2013-06-27 12:48 ` [PATCH 18/51] Input: atmel_mxt_ts - Add check for incorrect firmware file format Nick Dyer
2013-06-27 12:48 ` [PATCH 19/51] Input: atmel_mxt_ts - Read screen config from chip Nick Dyer
2013-06-27 12:48 ` [PATCH 20/51] Input: atmel_mxt_ts - Set default irqflags when there is no pdata Nick Dyer
2013-07-18 17:17   ` rydberg
2013-09-16  2:25     ` Dmitry Torokhov
2014-05-22 14:29       ` Nick Dyer
2014-05-23 16:37         ` Yufeng Shen
2014-05-24 12:41           ` Nick Dyer
2014-05-26 18:17             ` Yufeng Shen
2014-05-26  5:23           ` Dmitry Torokhov
2014-05-26 18:13             ` Yufeng Shen
2013-06-27 12:48 ` [PATCH 21/51] Input: atmel_mxt_ts - Use deep sleep mode when stopped Nick Dyer
2013-06-27 12:48 ` [PATCH 22/51] Input: atmel_mxt_ts - Add shutdown function Nick Dyer
2013-07-07  5:29   ` Dmitry Torokhov
2013-07-08  9:56     ` Nick Dyer
2013-07-10 16:55       ` Dmitry Torokhov
2013-07-10 18:32         ` Nick Dyer
2013-06-27 12:48 ` [PATCH 23/51] Input: atmel_mxt_ts - Rename pressure to amplitude to match spec Nick Dyer
2013-06-27 12:48 ` [PATCH 24/51] Input: atmel_mxt_ts - Rename touchscreen defines to include T9 Nick Dyer
2013-06-27 12:49 ` [PATCH 25/51] Input: atmel_mxt_ts - Handle multiple input reports in one message Nick Dyer
2013-07-18 17:18   ` rydberg
2013-06-27 12:49 ` [PATCH 26/51] Input: atmel_mxt_ts - Move input device init into separate function Nick Dyer
2013-07-07  5:34   ` Dmitry Torokhov
2013-07-08  9:41     ` Nick Dyer
2013-07-10 16:53       ` Dmitry Torokhov
2013-07-18 17:20   ` rydberg
2013-06-27 12:49 ` [PATCH 27/51] Input: atmel_mxt_ts - Handle APP_CRC_FAIL on startup Nick Dyer
2013-06-27 12:49 ` [PATCH 28/51] Input: atmel_mxt_ts - Handle bootloader previously unlocked Nick Dyer
2013-06-27 12:49 ` [PATCH 29/51] Input: atmel_mxt_ts - Add bootloader addresses for new chips Nick Dyer
2013-06-27 12:49 ` [PATCH 30/51] Input: atmel_mxt_ts - Recover from bootloader on probe Nick Dyer
2013-06-27 12:49 ` [PATCH 31/51] Input: atmel_mxt_ts - Add support for dynamic message size Nick Dyer
2013-06-27 12:49 ` [PATCH 32/51] Input: atmel_mxt_ts - Decode T6 status messages Nick Dyer
2013-06-27 12:49 ` [PATCH 33/51] Input: atmel_mxt_ts - Split message handler into separate functions Nick Dyer
2013-06-27 12:49 ` [PATCH 34/51] Input: atmel_mxt_ts - Implement T44 message handling Nick Dyer
2013-06-27 12:49 ` [PATCH 35/51] Input: atmel_mxt_ts - Output status from T48 Noise Supression Nick Dyer
2013-06-27 12:49 ` [PATCH 36/51] Input: atmel_mxt_ts - Output status from T42 Touch Suppression Nick Dyer
2013-06-27 12:49 ` [PATCH 37/51] Input: atmel_mxt_ts - Implement vector/orientation support Nick Dyer
2013-07-18 17:20   ` rydberg
2013-08-15 16:18     ` Nick Dyer
2013-06-27 12:49 ` [PATCH 38/51] Input: atmel_mxt_ts - implement I2C retries Nick Dyer
2013-06-27 12:49 ` [PATCH 39/51] Input: atmel_mxt_ts - Implement T63 Active Stylus support Nick Dyer
2013-07-18 17:21   ` rydberg
2013-06-27 12:49 ` [PATCH 40/51] Input: atmel_mxt_ts - Implement support for T15 Key Array Nick Dyer
2013-06-27 12:49 ` [PATCH 41/51] Input: atmel_mxt_ts - Remove unused defines Nick Dyer
2013-06-27 12:49 ` [PATCH 42/51] Input: atmel_mxt_ts - Verify Information Block checksum on probe Nick Dyer
2013-06-27 12:49 ` [PATCH 43/51] Input: atmel_mxt_ts - Use T18 RETRIGEN to handle IRQF_TRIGGER_LOW Nick Dyer
2013-06-27 12:49 ` [PATCH 44/51] Input: atmel_mxt_ts - Handle reports from T47 Stylus object Nick Dyer
2013-07-18 17:23   ` rydberg
2013-06-27 12:49 ` [PATCH 45/51] Input: atmel_mxt_ts - Release touch state during suspend Nick Dyer
2013-07-18 17:29   ` rydberg
2013-08-15 15:52     ` Nick Dyer
2013-06-27 12:49 ` [PATCH 46/51] Input: atmel_mxt_ts - Initialize power config before and after downloading cfg Nick Dyer
2013-06-27 12:49 ` [PATCH 47/51] Input: atmel_mxt_ts - Add regulator control support Nick Dyer
2013-06-27 12:49 ` [PATCH 48/51] Input: atmel_mxt_ts - Implement support for T100 touch object Nick Dyer
2013-06-27 12:49 ` [PATCH 49/51] Input: atmel_mxt_ts - Allow specification of firmware file name Nick Dyer
2013-06-27 12:49 ` [PATCH 50/51] Input: atmel_mxt_ts - Handle cfg filename via pdata/sysfs Nick Dyer
2013-06-27 12:49 ` [PATCH 51/51] Input: atmel_mxt_ts - Only use first T9 instance Nick Dyer
2013-06-27 15:17 ` Atmel updates to atmel_mxt_ts touch controller driver - v6 Nick Dyer
2013-07-18 19:47 ` rydberg
2013-08-15 15:55   ` Nick Dyer
2013-08-15 16:07     ` Dmitry Torokhov
2013-08-19 14:24       ` Nick Dyer
2013-09-10 13:58       ` Nick Dyer
     [not found]         ` <CAPDwgkOo7FYLujk16kJM=BqmXRKvZ2S_LOYURW0cXT5t=cmi6w@mail.gmail.com>
2014-01-15 10:44           ` Nick Dyer
     [not found]             ` <CAPDwgkOsP4K7r0-Mo-U52X9knRbGgbuD4dGptmj3x-LMTN75BA@mail.gmail.com>
2014-01-17 20:01               ` Nick Dyer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1372337366-9286-10-git-send-email-nick.dyer@itdev.co.uk \
    --to=nick.dyer@itdev.co.uk \
    --cc=Alan.Bowens@atmel.com \
    --cc=bleung@chromium.org \
    --cc=djkurtz@chromium.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=jy0922.shim@samsung.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=olofj@chromium.org \
    --cc=pmeerw@pmeerw.net \
    --cc=rydberg@euromail.se \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).