From: Nick Dyer <nick.dyer@itdev.co.uk>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Daniel Kurtz <djkurtz@chromium.org>,
Henrik Rydberg <rydberg@euromail.se>,
Joonyoung Shim <jy0922.shim@samsung.com>,
Alan Bowens <Alan.Bowens@atmel.com>,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
Peter Meerwald <pmeerw@pmeerw.net>,
Benson Leung <bleung@chromium.org>,
Olof Johansson <olofj@chromium.org>,
Nick Dyer <nick.dyer@itdev.co.uk>
Subject: [PATCH 01/51] Input: atmel_mxt_ts - Remove unnecessary platform data
Date: Thu, 27 Jun 2013 13:48:36 +0100 [thread overview]
Message-ID: <1372337366-9286-2-git-send-email-nick.dyer@itdev.co.uk> (raw)
In-Reply-To: <1372337366-9286-1-git-send-email-nick.dyer@itdev.co.uk>
It is not necessary to download these values to the maXTouch chip on every
probe, since they are stored in NVRAM. It makes life difficult when tuning the
device to keep them in sync with the config array/file, and requires a new
kernel build for minor tweaks.
These parameters only represent a tiny subset of the available configuration
options, tracking all of these options in platform data would be a endless
task. In addition, different versions of maXTouch chips may have these values
in different places or may not even have them at all.
Having these values also makes life more complex for device tree and other
platforms where having to define a static configuration isn't helpful.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
---
arch/arm/mach-exynos/mach-nuri.c | 5 ---
arch/arm/mach-exynos/mach-universal_c210.c | 5 ---
arch/arm/mach-s5pv210/mach-goni.c | 5 ---
drivers/input/touchscreen/atmel_mxt_ts.c | 50 ----------------------------
drivers/platform/x86/chromeos_laptop.c | 10 ------
include/linux/i2c/atmel_mxt_ts.h | 6 +---
6 files changed, 1 insertion(+), 80 deletions(-)
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 1ea7973..4516d26 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -333,13 +333,8 @@ static struct i2c_board_info i2c1_devs[] __initdata = {
/* TSP */
static struct mxt_platform_data mxt_platform_data = {
- .x_line = 18,
- .y_line = 11,
.x_size = 1024,
.y_size = 600,
- .blen = 0x1,
- .threshold = 0x28,
- .voltage = 2800000, /* 2.8V */
.orient = MXT_DIAGONAL_COUNTER,
.irqflags = IRQF_TRIGGER_FALLING,
};
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 497fcb7..2461e60 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -604,13 +604,8 @@ static struct i2c_board_info i2c5_devs[] __initdata = {
/* I2C3 (TSP) */
static struct mxt_platform_data qt602240_platform_data = {
- .x_line = 19,
- .y_line = 11,
.x_size = 800,
.y_size = 480,
- .blen = 0x11,
- .threshold = 0x28,
- .voltage = 2800000, /* 2.8V */
.orient = MXT_DIAGONAL,
.irqflags = IRQF_TRIGGER_FALLING,
};
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 3a38f7b..eca73af 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -239,13 +239,8 @@ static void __init goni_radio_init(void)
/* TSP */
static struct mxt_platform_data qt602240_platform_data = {
- .x_line = 17,
- .y_line = 11,
.x_size = 800,
.y_size = 480,
- .blen = 0x21,
- .threshold = 0x28,
- .voltage = 2800000, /* 2.8V */
.orient = MXT_DIAGONAL,
.irqflags = IRQF_TRIGGER_FALLING,
};
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 59aa240..e01a9ed 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -686,54 +686,6 @@ static int mxt_make_highchg(struct mxt_data *data)
return 0;
}
-static void mxt_handle_pdata(struct mxt_data *data)
-{
- const struct mxt_platform_data *pdata = data->pdata;
- u8 voltage;
-
- /* Set touchscreen lines */
- mxt_write_object(data, MXT_TOUCH_MULTI_T9, MXT_TOUCH_XSIZE,
- pdata->x_line);
- mxt_write_object(data, MXT_TOUCH_MULTI_T9, MXT_TOUCH_YSIZE,
- pdata->y_line);
-
- /* Set touchscreen orient */
- mxt_write_object(data, MXT_TOUCH_MULTI_T9, MXT_TOUCH_ORIENT,
- pdata->orient);
-
- /* Set touchscreen burst length */
- mxt_write_object(data, MXT_TOUCH_MULTI_T9,
- MXT_TOUCH_BLEN, pdata->blen);
-
- /* Set touchscreen threshold */
- mxt_write_object(data, MXT_TOUCH_MULTI_T9,
- MXT_TOUCH_TCHTHR, pdata->threshold);
-
- /* Set touchscreen resolution */
- mxt_write_object(data, MXT_TOUCH_MULTI_T9,
- MXT_TOUCH_XRANGE_LSB, (pdata->x_size - 1) & 0xff);
- mxt_write_object(data, MXT_TOUCH_MULTI_T9,
- MXT_TOUCH_XRANGE_MSB, (pdata->x_size - 1) >> 8);
- mxt_write_object(data, MXT_TOUCH_MULTI_T9,
- MXT_TOUCH_YRANGE_LSB, (pdata->y_size - 1) & 0xff);
- mxt_write_object(data, MXT_TOUCH_MULTI_T9,
- MXT_TOUCH_YRANGE_MSB, (pdata->y_size - 1) >> 8);
-
- /* Set touchscreen voltage */
- if (pdata->voltage) {
- if (pdata->voltage < MXT_VOLTAGE_DEFAULT) {
- voltage = (MXT_VOLTAGE_DEFAULT - pdata->voltage) /
- MXT_VOLTAGE_STEP;
- voltage = 0xff - voltage + 1;
- } else
- voltage = (pdata->voltage - MXT_VOLTAGE_DEFAULT) /
- MXT_VOLTAGE_STEP;
-
- mxt_write_object(data, MXT_SPT_CTECONFIG_T28,
- MXT_CTE_VOLTAGE, voltage);
- }
-}
-
static int mxt_get_info(struct mxt_data *data)
{
struct i2c_client *client = data->client;
@@ -841,8 +793,6 @@ static int mxt_initialize(struct mxt_data *data)
if (error)
goto err_free_object_table;
- mxt_handle_pdata(data);
-
/* Backup to memory */
mxt_write_object(data, MXT_GEN_COMMAND_T6,
MXT_COMMAND_BACKUPNV,
diff --git a/drivers/platform/x86/chromeos_laptop.c b/drivers/platform/x86/chromeos_laptop.c
index 3e5b4497..78ed277 100644
--- a/drivers/platform/x86/chromeos_laptop.c
+++ b/drivers/platform/x86/chromeos_laptop.c
@@ -71,13 +71,8 @@ static struct i2c_board_info __initdata tsl2563_als_device = {
};
static struct mxt_platform_data atmel_224s_tp_platform_data = {
- .x_line = 18,
- .y_line = 12,
.x_size = 102*20,
.y_size = 68*20,
- .blen = 0x80, /* Gain setting is in upper 4 bits */
- .threshold = 0x32,
- .voltage = 0, /* 3.3V */
.orient = MXT_VERTICAL_FLIP,
.irqflags = IRQF_TRIGGER_FALLING,
.is_tp = true,
@@ -96,13 +91,8 @@ static struct i2c_board_info __initdata atmel_224s_tp_device = {
};
static struct mxt_platform_data atmel_1664s_platform_data = {
- .x_line = 32,
- .y_line = 50,
.x_size = 1700,
.y_size = 2560,
- .blen = 0x89, /* Gain setting is in upper 4 bits */
- .threshold = 0x28,
- .voltage = 0, /* 3.3V */
.orient = MXT_ROTATED_90_COUNTER,
.irqflags = IRQF_TRIGGER_FALLING,
.is_tp = false,
diff --git a/include/linux/i2c/atmel_mxt_ts.h b/include/linux/i2c/atmel_mxt_ts.h
index 99e379b..eff0cdc 100644
--- a/include/linux/i2c/atmel_mxt_ts.h
+++ b/include/linux/i2c/atmel_mxt_ts.h
@@ -33,14 +33,10 @@ struct mxt_platform_data {
const u8 *config;
size_t config_length;
- unsigned int x_line;
- unsigned int y_line;
unsigned int x_size;
unsigned int y_size;
- unsigned int blen;
- unsigned int threshold;
- unsigned int voltage;
unsigned char orient;
+
unsigned long irqflags;
bool is_tp;
const unsigned int key_map[MXT_NUM_GPIO];
--
1.7.10.4
next prev parent reply other threads:[~2013-06-27 12:48 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-27 12:48 Atmel updates to atmel_mxt_ts touch controller driver - v6 Nick Dyer
2013-06-27 12:48 ` Nick Dyer [this message]
2013-06-27 12:48 ` [PATCH 02/51] Input: atmel_mxt_ts - Improve T19 GPIO keys handling Nick Dyer
2013-07-18 17:11 ` rydberg
2013-06-27 12:48 ` [PATCH 03/51] Input: atmel_mxt_ts - Return IRQ_NONE when interrupt handler fails Nick Dyer
2013-06-27 12:48 ` [PATCH 04/51] Input: atmel_mxt_ts - define helper functions for size and instances Nick Dyer
2013-06-27 12:48 ` [PATCH 05/51] Input: atmel_mxt_ts - Select FW_LOADER for firmware code Nick Dyer
2013-06-27 12:48 ` [PATCH 06/51] Input: atmel_mxt_ts - wait for CHG assert in mxt_check_bootloader Nick Dyer
2013-06-27 12:48 ` [PATCH 07/51] Input: atmel_mxt_ts - wait for CHG after bootloader resets Nick Dyer
2013-06-27 12:48 ` [PATCH 08/51] Input: atmel_mxt_ts - Initialise IRQ before probing Nick Dyer
2013-07-18 17:13 ` rydberg
2013-06-27 12:48 ` [PATCH 09/51] Input: atmel_mxt_ts - Make wait-after-reset period compatible with all chips Nick Dyer
2013-06-27 12:48 ` [PATCH 10/51] Input: atmel_mxt_ts - Improve error reporting and debug Nick Dyer
2013-06-27 12:48 ` [PATCH 11/51] Input: atmel_mxt_ts - Implement CRC check for configuration data Nick Dyer
2013-09-18 16:59 ` [11/51] " Martin Fuzzey
2013-06-27 12:48 ` [PATCH 12/51] Input: atmel_mxt_ts - Download device config using firmware loader Nick Dyer
2013-09-18 17:08 ` [12/51] " Martin Fuzzey
2013-06-27 12:48 ` [PATCH 13/51] Input: atmel_mxt_ts - Calculate and check CRC in config file Nick Dyer
2013-06-27 12:48 ` [PATCH 14/51] Input: atmel_mxt_ts - Add additional bootloader addresses Nick Dyer
2013-06-27 12:48 ` [PATCH 15/51] Input: atmel_mxt_ts - Read and report bootloader version Nick Dyer
2013-06-27 12:48 ` [PATCH 16/51] Input: atmel_mxt_ts - Implement bootloader frame retries Nick Dyer
2013-06-27 12:48 ` [PATCH 17/51] Input: atmel_mxt_ts - Improve bootloader progress output Nick Dyer
2013-06-27 12:48 ` [PATCH 18/51] Input: atmel_mxt_ts - Add check for incorrect firmware file format Nick Dyer
2013-06-27 12:48 ` [PATCH 19/51] Input: atmel_mxt_ts - Read screen config from chip Nick Dyer
2013-06-27 12:48 ` [PATCH 20/51] Input: atmel_mxt_ts - Set default irqflags when there is no pdata Nick Dyer
2013-07-18 17:17 ` rydberg
2013-09-16 2:25 ` Dmitry Torokhov
2014-05-22 14:29 ` Nick Dyer
2014-05-23 16:37 ` Yufeng Shen
2014-05-24 12:41 ` Nick Dyer
2014-05-26 18:17 ` Yufeng Shen
2014-05-26 5:23 ` Dmitry Torokhov
2014-05-26 18:13 ` Yufeng Shen
2013-06-27 12:48 ` [PATCH 21/51] Input: atmel_mxt_ts - Use deep sleep mode when stopped Nick Dyer
2013-06-27 12:48 ` [PATCH 22/51] Input: atmel_mxt_ts - Add shutdown function Nick Dyer
2013-07-07 5:29 ` Dmitry Torokhov
2013-07-08 9:56 ` Nick Dyer
2013-07-10 16:55 ` Dmitry Torokhov
2013-07-10 18:32 ` Nick Dyer
2013-06-27 12:48 ` [PATCH 23/51] Input: atmel_mxt_ts - Rename pressure to amplitude to match spec Nick Dyer
2013-06-27 12:48 ` [PATCH 24/51] Input: atmel_mxt_ts - Rename touchscreen defines to include T9 Nick Dyer
2013-06-27 12:49 ` [PATCH 25/51] Input: atmel_mxt_ts - Handle multiple input reports in one message Nick Dyer
2013-07-18 17:18 ` rydberg
2013-06-27 12:49 ` [PATCH 26/51] Input: atmel_mxt_ts - Move input device init into separate function Nick Dyer
2013-07-07 5:34 ` Dmitry Torokhov
2013-07-08 9:41 ` Nick Dyer
2013-07-10 16:53 ` Dmitry Torokhov
2013-07-18 17:20 ` rydberg
2013-06-27 12:49 ` [PATCH 27/51] Input: atmel_mxt_ts - Handle APP_CRC_FAIL on startup Nick Dyer
2013-06-27 12:49 ` [PATCH 28/51] Input: atmel_mxt_ts - Handle bootloader previously unlocked Nick Dyer
2013-06-27 12:49 ` [PATCH 29/51] Input: atmel_mxt_ts - Add bootloader addresses for new chips Nick Dyer
2013-06-27 12:49 ` [PATCH 30/51] Input: atmel_mxt_ts - Recover from bootloader on probe Nick Dyer
2013-06-27 12:49 ` [PATCH 31/51] Input: atmel_mxt_ts - Add support for dynamic message size Nick Dyer
2013-06-27 12:49 ` [PATCH 32/51] Input: atmel_mxt_ts - Decode T6 status messages Nick Dyer
2013-06-27 12:49 ` [PATCH 33/51] Input: atmel_mxt_ts - Split message handler into separate functions Nick Dyer
2013-06-27 12:49 ` [PATCH 34/51] Input: atmel_mxt_ts - Implement T44 message handling Nick Dyer
2013-06-27 12:49 ` [PATCH 35/51] Input: atmel_mxt_ts - Output status from T48 Noise Supression Nick Dyer
2013-06-27 12:49 ` [PATCH 36/51] Input: atmel_mxt_ts - Output status from T42 Touch Suppression Nick Dyer
2013-06-27 12:49 ` [PATCH 37/51] Input: atmel_mxt_ts - Implement vector/orientation support Nick Dyer
2013-07-18 17:20 ` rydberg
2013-08-15 16:18 ` Nick Dyer
2013-06-27 12:49 ` [PATCH 38/51] Input: atmel_mxt_ts - implement I2C retries Nick Dyer
2013-06-27 12:49 ` [PATCH 39/51] Input: atmel_mxt_ts - Implement T63 Active Stylus support Nick Dyer
2013-07-18 17:21 ` rydberg
2013-06-27 12:49 ` [PATCH 40/51] Input: atmel_mxt_ts - Implement support for T15 Key Array Nick Dyer
2013-06-27 12:49 ` [PATCH 41/51] Input: atmel_mxt_ts - Remove unused defines Nick Dyer
2013-06-27 12:49 ` [PATCH 42/51] Input: atmel_mxt_ts - Verify Information Block checksum on probe Nick Dyer
2013-06-27 12:49 ` [PATCH 43/51] Input: atmel_mxt_ts - Use T18 RETRIGEN to handle IRQF_TRIGGER_LOW Nick Dyer
2013-06-27 12:49 ` [PATCH 44/51] Input: atmel_mxt_ts - Handle reports from T47 Stylus object Nick Dyer
2013-07-18 17:23 ` rydberg
2013-06-27 12:49 ` [PATCH 45/51] Input: atmel_mxt_ts - Release touch state during suspend Nick Dyer
2013-07-18 17:29 ` rydberg
2013-08-15 15:52 ` Nick Dyer
2013-06-27 12:49 ` [PATCH 46/51] Input: atmel_mxt_ts - Initialize power config before and after downloading cfg Nick Dyer
2013-06-27 12:49 ` [PATCH 47/51] Input: atmel_mxt_ts - Add regulator control support Nick Dyer
2013-06-27 12:49 ` [PATCH 48/51] Input: atmel_mxt_ts - Implement support for T100 touch object Nick Dyer
2013-06-27 12:49 ` [PATCH 49/51] Input: atmel_mxt_ts - Allow specification of firmware file name Nick Dyer
2013-06-27 12:49 ` [PATCH 50/51] Input: atmel_mxt_ts - Handle cfg filename via pdata/sysfs Nick Dyer
2013-06-27 12:49 ` [PATCH 51/51] Input: atmel_mxt_ts - Only use first T9 instance Nick Dyer
2013-06-27 15:17 ` Atmel updates to atmel_mxt_ts touch controller driver - v6 Nick Dyer
2013-07-18 19:47 ` rydberg
2013-08-15 15:55 ` Nick Dyer
2013-08-15 16:07 ` Dmitry Torokhov
2013-08-19 14:24 ` Nick Dyer
2013-09-10 13:58 ` Nick Dyer
[not found] ` <CAPDwgkOo7FYLujk16kJM=BqmXRKvZ2S_LOYURW0cXT5t=cmi6w@mail.gmail.com>
2014-01-15 10:44 ` Nick Dyer
[not found] ` <CAPDwgkOsP4K7r0-Mo-U52X9knRbGgbuD4dGptmj3x-LMTN75BA@mail.gmail.com>
2014-01-17 20:01 ` Nick Dyer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1372337366-9286-2-git-send-email-nick.dyer@itdev.co.uk \
--to=nick.dyer@itdev.co.uk \
--cc=Alan.Bowens@atmel.com \
--cc=bleung@chromium.org \
--cc=djkurtz@chromium.org \
--cc=dmitry.torokhov@gmail.com \
--cc=jy0922.shim@samsung.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=olofj@chromium.org \
--cc=pmeerw@pmeerw.net \
--cc=rydberg@euromail.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).