[PATCH] mfd: input: arm: dts: doc: ti_am335x: typo fix (coordiante -> coordinate)

[PATCH] mfd: input: arm: dts: doc: ti_am335x: typo fix (coordiante -> coordinate)

[Zubair Lutfullah]

 
Small typo fix. Received ack from mfd already.
Awaiting acks from all the rest.

As Lee from mfd stated, we can remove these during staging now.
or we'll have to leave typos as is later on.

Zubair Lutfullah (1):
  mfd: input: arm: dts: doc: ti_am335x: typo fixes (coordiante ->
    coordinate)

 .../bindings/input/touchscreen/ti-tsc-adc.txt      |    4 ++--
 arch/arm/boot/dts/am335x-evm.dts                   |    2 +-
 drivers/input/touchscreen/ti_am335x_tsc.c          |    2 +-
 drivers/mfd/ti_am335x_tscadc.c                     |    2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)

-- 
1.7.9.5

[PATCH] mfd: input: arm: dts: doc: ti_am335x: typo fixes (coordiante -> coordinate)

[Zubair Lutfullah]

Did a grep for 'coordiante' and replaced them all with 'coordinate'

Signed-off-by: Zubair Lutfullah <zubair.lutfullah@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
 .../bindings/input/touchscreen/ti-tsc-adc.txt      |    4 ++--
 arch/arm/boot/dts/am335x-evm.dts                   |    2 +-
 drivers/input/touchscreen/ti_am335x_tsc.c          |    2 +-
 drivers/mfd/ti_am335x_tscadc.c                     |    2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
index 491c97b..3e22aec 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
@@ -6,7 +6,7 @@ Required properties:
 	ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen
 		  support on the platform.
 	ti,x-plate-resistance: X plate resistance
-	ti,coordiante-readouts: The sequencer supports a total of 16
+	ti,coordinate-readouts: The sequencer supports a total of 16
 				programmable steps each step is used to
 				read a single coordinate. A single
                                 readout is enough but multiple reads can
@@ -34,7 +34,7 @@ Example:
 		tsc {
 			ti,wires = <4>;
 			ti,x-plate-resistance = <200>;
-			ti,coordiante-readouts = <5>;
+			ti,coordinate-readouts = <5>;
 			ti,wire-config = <0x00 0x11 0x22 0x33>;
 		};
 
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 0fa4c7f..e50b781 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -250,7 +250,7 @@
 	tsc {
 		ti,wires = <4>;
 		ti,x-plate-resistance = <200>;
-		ti,coordiante-readouts = <5>;
+		ti,coordinate-readouts = <5>;
 		ti,wire-config = <0x00 0x11 0x22 0x33>;
 	};
 
diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
index 0e9f02a..6422f65 100644
--- a/drivers/input/touchscreen/ti_am335x_tsc.c
+++ b/drivers/input/touchscreen/ti_am335x_tsc.c
@@ -348,7 +348,7 @@ static int titsc_parse_dt(struct platform_device *pdev,
 	if (err < 0)
 		return err;
 
-	err = of_property_read_u32(node, "ti,coordiante-readouts",
+	err = of_property_read_u32(node, "ti,coordinate-readouts",
 			&ts_dev->coordinate_readouts);
 	if (err < 0)
 		return err;
diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index cd74d59..1686ae6 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -106,7 +106,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 
 	node = of_get_child_by_name(pdev->dev.of_node, "tsc");
 	of_property_read_u32(node, "ti,wires", &tsc_wires);
-	of_property_read_u32(node, "ti,coordiante-readouts", &readouts);
+	of_property_read_u32(node, "ti,coordinate-readouts", &readouts);
 
 	node = of_get_child_by_name(pdev->dev.of_node, "adc");
 	of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
-- 
1.7.9.5