From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Cc: linux-input <linux-input@vger.kernel.org>,
Jiri Kosina <jkosina@suse.cz>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Benjamin Tissoires <benjamin.tissoires@redhat.com>
Subject: Re: [PATCH 2/2] i2c-hid: remove mostly useless parameter 'debug'
Date: Fri, 02 Aug 2013 17:49:47 +0300 [thread overview]
Message-ID: <1375454987.31118.77.camel@smile> (raw)
In-Reply-To: <CAN+gG=Ec=jJy7HxRW08up+=Z8C0Lz4B8bhPcP+7__zuONnCAgw@mail.gmail.com>
On Fri, 2013-08-02 at 16:30 +0200, Benjamin Tissoires wrote:
> On Fri, Aug 2, 2013 at 1:07 PM, Andy Shevchenko
> <andriy.shevchenko@linux.intel.com> wrote:
> > We have nice dynamic debug framework to enable or disable debug messaging at
> > run time. So, instead of an additional module parameter let's use that framework
> > and call dev_dbg() unconditionally in the driver.
> >
> > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> > ---
>
> Well, when I introduced those debug variables, I had in mind the fact
> that the driver was not widely tested, and that I may need to ask for
> traces from users. I'm afraid that relying on dev_dbg will create a
> lot more noise when we will want to understand the HID/i2c problems.
You have only those messages on the debug level (frankly, only one is
outside of if (debug) condition).
> Moreover, the dev_dbg calls are compiled out if DEBUG symbol is not
> set.
Yes, and what is the difference between previously used
if (debug)
dev_dbg(...)
?
> So, if we ever have to change this debug variable, I would prefer
> using the hid debug environment which would at least limit the number
> of debug outputs to the HID subsystem.
Usually when I see such code I understood it was written in
pre-dynamic-debug epoch. So, my point is to switch to dynamic debug and
use it efficiently.
>
> Cheers,
> Benjamin
>
> > drivers/hid/i2c-hid/i2c-hid.c | 59 ++++++++++++++++++-------------------------
> > 1 file changed, 24 insertions(+), 35 deletions(-)
> >
> > diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
> > index 05d4f96..5f50fc7 100644
> > --- a/drivers/hid/i2c-hid/i2c-hid.c
> > +++ b/drivers/hid/i2c-hid/i2c-hid.c
> > @@ -47,17 +47,6 @@
> > #define I2C_HID_PWR_ON 0x00
> > #define I2C_HID_PWR_SLEEP 0x01
> >
> > -/* debug option */
> > -static bool debug;
> > -module_param(debug, bool, 0444);
> > -MODULE_PARM_DESC(debug, "print a lot of debug information");
> > -
> > -#define i2c_hid_dbg(ihid, fmt, arg...) \
> > -do { \
> > - if (debug) \
> > - dev_printk(KERN_DEBUG, &(ihid)->client->dev, fmt, ##arg); \
> > -} while (0)
> > -
> > struct i2c_hid_desc {
> > __le16 wHIDDescLength;
> > __le16 bcdVersion;
> > @@ -177,7 +166,7 @@ static int __i2c_hid_command(struct i2c_client *client,
> > memcpy(cmd->data + length, args, args_len);
> > length += args_len;
> >
> > - i2c_hid_dbg(ihid, "%s: cmd=%*ph\n", __func__, length, cmd->data);
> > + dev_dbg(&client->dev, "%s: cmd=%*ph\n", __func__, length, cmd->data);
> >
> > msg[0].addr = client->addr;
> > msg[0].flags = client->flags & I2C_M_TEN;
> > @@ -207,12 +196,12 @@ static int __i2c_hid_command(struct i2c_client *client,
> > ret = 0;
> >
> > if (wait) {
> > - i2c_hid_dbg(ihid, "%s: waiting...\n", __func__);
> > + dev_dbg(&client->dev, "%s: waiting...\n", __func__);
> > if (!wait_event_timeout(ihid->wait,
> > !test_bit(I2C_HID_RESET_PENDING, &ihid->flags),
> > msecs_to_jiffies(5000)))
> > ret = -ENODATA;
> > - i2c_hid_dbg(ihid, "%s: finished.\n", __func__);
> > + dev_dbg(&client->dev, "%s: finished.\n", __func__);
> > }
> >
> > return ret;
> > @@ -235,7 +224,7 @@ static int i2c_hid_get_report(struct i2c_client *client, u8 reportType,
> > int args_len = 0;
> > u16 readRegister = le16_to_cpu(ihid->hdesc.wDataRegister);
> >
> > - i2c_hid_dbg(ihid, "%s\n", __func__);
> > + dev_dbg(&client->dev, "%s\n", __func__);
> >
> > if (reportID >= 0x0F) {
> > args[args_len++] = reportID;
> > @@ -276,7 +265,7 @@ static int i2c_hid_set_report(struct i2c_client *client, u8 reportType,
> > size /* args */;
> > int index = 0;
> >
> > - i2c_hid_dbg(ihid, "%s\n", __func__);
> > + dev_dbg(&client->dev, "%s\n", __func__);
> >
> > if (reportID >= 0x0F) {
> > args[index++] = reportID;
> > @@ -316,10 +305,9 @@ static int i2c_hid_set_report(struct i2c_client *client, u8 reportType,
> >
> > static int i2c_hid_set_power(struct i2c_client *client, int power_state)
> > {
> > - struct i2c_hid *ihid = i2c_get_clientdata(client);
> > int ret;
> >
> > - i2c_hid_dbg(ihid, "%s\n", __func__);
> > + dev_dbg(&client->dev, "%s\n", __func__);
> >
> > ret = __i2c_hid_command(client, &hid_set_power_cmd, power_state,
> > 0, NULL, 0, NULL, 0);
> > @@ -331,16 +319,15 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state)
> >
> > static int i2c_hid_hwreset(struct i2c_client *client)
> > {
> > - struct i2c_hid *ihid = i2c_get_clientdata(client);
> > int ret;
> >
> > - i2c_hid_dbg(ihid, "%s\n", __func__);
> > + dev_dbg(&client->dev, "%s\n", __func__);
> >
> > ret = i2c_hid_set_power(client, I2C_HID_PWR_ON);
> > if (ret)
> > return ret;
> >
> > - i2c_hid_dbg(ihid, "resetting...\n");
> > + dev_dbg(&client->dev, "resetting...\n");
> >
> > ret = i2c_hid_command(client, &hid_reset_cmd, NULL, 0);
> > if (ret) {
> > @@ -354,15 +341,16 @@ static int i2c_hid_hwreset(struct i2c_client *client)
> >
> > static void i2c_hid_get_input(struct i2c_hid *ihid)
> > {
> > + struct i2c_client *client = ihid->client;
> > int ret, ret_size;
> > int size = le16_to_cpu(ihid->hdesc.wMaxInputLength);
> >
> > - ret = i2c_master_recv(ihid->client, ihid->inbuf, size);
> > + ret = i2c_master_recv(client, ihid->inbuf, size);
> > if (ret != size) {
> > if (ret < 0)
> > return;
> >
> > - dev_err(&ihid->client->dev, "%s: got %d data instead of %d\n",
> > + dev_err(&client->dev, "%s: got %d data instead of %d\n",
> > __func__, ret, size);
> > return;
> > }
> > @@ -377,12 +365,12 @@ static void i2c_hid_get_input(struct i2c_hid *ihid)
> > }
> >
> > if (ret_size > size) {
> > - dev_err(&ihid->client->dev, "%s: incomplete report (%d/%d)\n",
> > + dev_err(&client->dev, "%s: incomplete report (%d/%d)\n",
> > __func__, size, ret_size);
> > return;
> > }
> >
> > - i2c_hid_dbg(ihid, "input: %*ph\n", ret_size, ihid->inbuf);
> > + dev_dbg(&client->dev, "input: %*ph\n", ret_size, ihid->inbuf);
> >
> > if (test_bit(I2C_HID_STARTED, &ihid->flags))
> > hid_input_report(ihid->hid, HID_INPUT_REPORT, ihid->inbuf + 2,
> > @@ -423,7 +411,8 @@ static void i2c_hid_init_report(struct hid_report *report, u8 *buffer,
> > report->id, buffer, size))
> > return;
> >
> > - i2c_hid_dbg(ihid, "report (len=%d): %*ph\n", size, size, ihid->inbuf);
> > + dev_dbg(&client->dev, "report (len=%d): %*ph\n", size,
> > + size, ihid->inbuf);
> >
> > ret_size = buffer[0] | (buffer[1] << 8);
> >
> > @@ -618,7 +607,7 @@ static int i2c_hid_parse(struct hid_device *hid)
> > int ret;
> > int tries = 3;
> >
> > - i2c_hid_dbg(ihid, "entering %s\n", __func__);
> > + dev_dbg(&client->dev, "entering %s\n", __func__);
> >
> > rsize = le16_to_cpu(hdesc->wReportDescLength);
> > if (!rsize || rsize > HID_MAX_DESCRIPTOR_SIZE) {
> > @@ -642,7 +631,7 @@ static int i2c_hid_parse(struct hid_device *hid)
> > return -ENOMEM;
> > }
> >
> > - i2c_hid_dbg(ihid, "asking HID report descriptor\n");
> > + dev_dbg(&client->dev, "asking HID report descriptor\n");
> >
> > ret = i2c_hid_command(client, &hid_report_descr_cmd, rdesc, rsize);
> > if (ret) {
> > @@ -651,7 +640,7 @@ static int i2c_hid_parse(struct hid_device *hid)
> > return -EIO;
> > }
> >
> > - i2c_hid_dbg(ihid, "Report Descriptor: %*ph\n", rsize, rdesc);
> > + dev_dbg(&client->dev, "Report Descriptor: %*ph\n", rsize, rdesc);
> >
> > ret = hid_parse_report(hid, rdesc, rsize);
> > kfree(rdesc);
> > @@ -741,10 +730,9 @@ static void i2c_hid_close(struct hid_device *hid)
> > static int i2c_hid_power(struct hid_device *hid, int lvl)
> > {
> > struct i2c_client *client = hid->driver_data;
> > - struct i2c_hid *ihid = i2c_get_clientdata(client);
> > int ret = 0;
> >
> > - i2c_hid_dbg(ihid, "%s lvl:%d\n", __func__, lvl);
> > + dev_dbg(&client->dev, "%s lvl:%d\n", __func__, lvl);
> >
> > switch (lvl) {
> > case PM_HINT_FULLON:
> > @@ -801,8 +789,8 @@ static int i2c_hid_fetch_hid_descriptor(struct i2c_hid *ihid)
> > * bytes 2-3 -> bcdVersion (has to be 1.00) */
> > ret = i2c_hid_command(client, &hid_descr_cmd, ihid->hdesc_buffer, 4);
> >
> > - i2c_hid_dbg(ihid, "%s, ihid->hdesc_buffer: %4ph\n", __func__,
> > - ihid->hdesc_buffer);
> > + dev_dbg(&client->dev, "%s, ihid->hdesc_buffer: %4ph\n", __func__,
> > + ihid->hdesc_buffer);
> >
> > if (ret) {
> > dev_err(&client->dev,
> > @@ -832,7 +820,7 @@ static int i2c_hid_fetch_hid_descriptor(struct i2c_hid *ihid)
> > return -ENODEV;
> > }
> >
> > - i2c_hid_dbg(ihid, "Fetching the HID descriptor\n");
> > + dev_dbg(&client->dev, "Fetching the HID descriptor\n");
> >
> > ret = i2c_hid_command(client, &hid_descr_cmd, ihid->hdesc_buffer,
> > dsize);
> > @@ -841,7 +829,8 @@ static int i2c_hid_fetch_hid_descriptor(struct i2c_hid *ihid)
> > return -ENODEV;
> > }
> >
> > - i2c_hid_dbg(ihid, "HID Descriptor: %*ph\n", dsize, ihid->hdesc_buffer);
> > + dev_dbg(&client->dev, "HID Descriptor: %*ph\n", dsize,
> > + ihid->hdesc_buffer);
> >
> > return 0;
> > }
> > --
> > 1.8.4.rc0
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-input" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy
next prev parent reply other threads:[~2013-08-02 14:50 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-02 11:07 [PATCH 1/2] i2c-hid: don't push static constants on stack for %*ph Andy Shevchenko
2013-08-02 11:07 ` [PATCH 2/2] i2c-hid: remove mostly useless parameter 'debug' Andy Shevchenko
2013-08-02 14:30 ` Benjamin Tissoires
2013-08-02 14:49 ` Andy Shevchenko [this message]
2013-08-02 18:14 ` Benjamin Tissoires
2013-08-02 18:31 ` Andy Shevchenko
2013-08-02 18:42 ` Benjamin Tissoires
2013-08-05 9:26 ` Jiri Kosina
2013-08-06 8:02 ` Andy Shevchenko
2013-08-07 15:21 ` Andy Shevchenko
2013-08-02 12:51 ` [PATCH 1/2] i2c-hid: don't push static constants on stack for %*ph Benjamin Tissoires
2013-08-05 9:21 ` Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1375454987.31118.77.camel@smile \
--to=andriy.shevchenko@linux.intel.com \
--cc=benjamin.tissoires@gmail.com \
--cc=benjamin.tissoires@redhat.com \
--cc=jkosina@suse.cz \
--cc=linux-input@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).