[PATCH 1/2] HID: hid-sensor-hub: Add logical min and max

[PATCH 1/2] HID: hid-sensor-hub: Add logical min and max

[Srinivas Pandruvada]

Exporting logical minimum and maximum of HID fields as part of the
hid sensor attribute info. This can be used for range checking and
to calculate enumeration base for NAry fields of HID sensor hub.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
---
 drivers/hid/hid-sensor-hub.c   | 20 ++++++++------------
 include/linux/hid-sensor-hub.h |  2 ++
 2 files changed, 10 insertions(+), 12 deletions(-)

diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c
index a184e19..d87f7cb 100644
--- a/drivers/hid/hid-sensor-hub.c
+++ b/drivers/hid/hid-sensor-hub.c
@@ -112,13 +112,15 @@ static int sensor_hub_get_physical_device_count(
 
 static void sensor_hub_fill_attr_info(
 		struct hid_sensor_hub_attribute_info *info,
-		s32 index, s32 report_id, s32 units, s32 unit_expo, s32 size)
+		s32 index, s32 report_id, struct hid_field *field)
 {
 	info->index = index;
 	info->report_id = report_id;
-	info->units = units;
-	info->unit_expo = unit_expo;
-	info->size = size/8;
+	info->units = field->unit;
+	info->unit_expo = field->unit_exponent;
+	info->size = (field->report_size * field->report_count)/8;
+	info->logical_minimum = field->logical_minimum;
+	info->logical_maximum = field->logical_maximum;
 }
 
 static struct hid_sensor_hub_callbacks *sensor_hub_get_callback(
@@ -325,9 +327,7 @@ int sensor_hub_input_get_attribute_info(struct hid_sensor_hub_device *hsdev,
 			if (field->physical == usage_id &&
 				field->logical == attr_usage_id) {
 				sensor_hub_fill_attr_info(info, i, report->id,
-					field->unit, field->unit_exponent,
-					field->report_size *
-							field->report_count);
+							  field);
 				ret = 0;
 			} else {
 				for (j = 0; j < field->maxusage; ++j) {
@@ -336,11 +336,7 @@ int sensor_hub_input_get_attribute_info(struct hid_sensor_hub_device *hsdev,
 					field->usage[j].collection_index ==
 					collection_index) {
 						sensor_hub_fill_attr_info(info,
-							i, report->id,
-							field->unit,
-							field->unit_exponent,
-							field->report_size *
-							field->report_count);
+							  i, report->id, field);
 						ret = 0;
 						break;
 					}
diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h
index a265af2..fd66e45 100644
--- a/include/linux/hid-sensor-hub.h
+++ b/include/linux/hid-sensor-hub.h
@@ -40,6 +40,8 @@ struct hid_sensor_hub_attribute_info {
 	s32 units;
 	s32 unit_expo;
 	s32 size;
+	s32 logical_minimum;
+	s32 logical_maximum;
 };
 
 /**
-- 
1.8.3.2

[PATCH 2/2] iio: hid-sensors: Fix power and report state

[Srinivas Pandruvada]

In the original HID sensor hub firmwares all Named array enums were
to 0-based. But the most recent hub implemented as 1-based,
because of the implementation by one of the major OS vendor.
Using logical minimum for the field as the base of enum. So we add
logical minimum to the selector values before setting those fields.
Some sensor hub FWs already changed logical minimum from 0 to 1
to reflect this and hope every other vendor will follow.
There is no easy way to add a common HID quirk for NAry elements,
even if the standard specifies these field as NAry, the collection
used to describe selectors is still just "logical".

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
---
 drivers/iio/common/hid-sensors/Kconfig              |  9 ---------
 drivers/iio/common/hid-sensors/hid-sensor-trigger.c | 20 +++++++++++++++-----
 include/linux/hid-sensor-ids.h                      | 12 ++++++++++++
 3 files changed, 27 insertions(+), 14 deletions(-)

diff --git a/drivers/iio/common/hid-sensors/Kconfig b/drivers/iio/common/hid-sensors/Kconfig
index 1178121..39188b7 100644
--- a/drivers/iio/common/hid-sensors/Kconfig
+++ b/drivers/iio/common/hid-sensors/Kconfig
@@ -25,13 +25,4 @@ config HID_SENSOR_IIO_TRIGGER
 	  If this driver is compiled as a module, it will be named
 	  hid-sensor-trigger.
 
-config HID_SENSOR_ENUM_BASE_QUIRKS
-	bool "ENUM base quirks for HID Sensor IIO drivers"
-	depends on HID_SENSOR_IIO_COMMON
-	help
-	  Say yes here to build support for sensor hub FW using
-	  enumeration, which is using 1 as base instead of 0.
-	  Since logical minimum is still set 0 instead of 1,
-	  there is no easy way to differentiate.
-
 endmenu
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
index b6e77e0..781d3fa 100644
--- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
@@ -33,24 +33,34 @@ static int hid_sensor_data_rdy_trigger_set_state(struct iio_trigger *trig,
 {
 	struct hid_sensor_common *st = iio_trigger_get_drvdata(trig);
 	int state_val;
+	int report_val;
 
 	if (state) {
 		if (sensor_hub_device_open(st->hsdev))
 			return -EIO;
-	} else
+		state_val =
+		HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM;
+		report_val =
+		HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM;
+
+	} else {
 		sensor_hub_device_close(st->hsdev);
+		state_val =
+		HID_USAGE_SENSOR_PROP_POWER_STATE_D4_POWER_OFF_ENUM;
+		report_val =
+		HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM;
+	}
 
-	state_val = state ? 1 : 0;
-	if (IS_ENABLED(CONFIG_HID_SENSOR_ENUM_BASE_QUIRKS))
-		++state_val;
 	st->data_ready = state;
+	state_val += st->power_state.logical_minimum;
+	report_val += st->report_state.logical_minimum;
 	sensor_hub_set_feature(st->hsdev, st->power_state.report_id,
 					st->power_state.index,
 					(s32)state_val);
 
 	sensor_hub_set_feature(st->hsdev, st->report_state.report_id,
 					st->report_state.index,
-					(s32)state_val);
+					(s32)report_val);
 
 	return 0;
 }
diff --git a/include/linux/hid-sensor-ids.h b/include/linux/hid-sensor-ids.h
index 4f945d3..8323775 100644
--- a/include/linux/hid-sensor-ids.h
+++ b/include/linux/hid-sensor-ids.h
@@ -117,4 +117,16 @@
 #define HID_USAGE_SENSOR_PROP_REPORT_STATE			0x200316
 #define HID_USAGE_SENSOR_PROY_POWER_STATE			0x200319
 
+/* Power state enumerations */
+#define HID_USAGE_SENSOR_PROP_POWER_STATE_UNDEFINED_ENUM		0x00
+#define HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM		0x01
+#define HID_USAGE_SENSOR_PROP_POWER_STATE_D1_LOW_POWER_ENUM		0x02
+#define HID_USAGE_SENSOR_PROP_POWER_STATE_D2_STANDBY_WITH_WAKE_ENUM	0x03
+#define HID_USAGE_SENSOR_PROP_POWER_STATE_D3_SLEEP_WITH_WAKE_ENUM	0x04
+#define HID_USAGE_SENSOR_PROP_POWER_STATE_D4_POWER_OFF_ENUM		0x05
+
+/* Report State enumerations */
+#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM		0x00
+#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM		0x01
+
 #endif
-- 
1.8.3.2

Re: [PATCH 2/2] iio: hid-sensors: Fix power and report state

[Jonathan Cameron]

On 11/27/13 22:19, Srinivas Pandruvada wrote:
> In the original HID sensor hub firmwares all Named array enums were
> to 0-based. But the most recent hub implemented as 1-based,
> because of the implementation by one of the major OS vendor.
> Using logical minimum for the field as the base of enum. So we add
> logical minimum to the selector values before setting those fields.
> Some sensor hub FWs already changed logical minimum from 0 to 1
> to reflect this and hope every other vendor will follow.
> There is no easy way to add a common HID quirk for NAry elements,
> even if the standard specifies these field as NAry, the collection
> used to describe selectors is still just "logical".
>
> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>

Looks like a good solution to me.

This one is a little interesting.  Technically I 'believe' we don't have
a bug as it is possible to make these devices work via the kconfig option
and it definitely isn't a regression.  As such I have applied this to the
branch intended for the next kernel cycled (togreg) rather than to the
fixes branch.

If people have a very strong feeling about this then shout reasonably quickly - I'll
probably hold off sending that branch to Greg for a few days anyway.

I've cc'd GregKH to see if he has any input on the path this should take.

Jonathan

> ---
>  drivers/iio/common/hid-sensors/Kconfig              |  9 ---------
>  drivers/iio/common/hid-sensors/hid-sensor-trigger.c | 20 +++++++++++++++-----
>  include/linux/hid-sensor-ids.h                      | 12 ++++++++++++
>  3 files changed, 27 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/iio/common/hid-sensors/Kconfig b/drivers/iio/common/hid-sensors/Kconfig
> index 1178121..39188b7 100644
> --- a/drivers/iio/common/hid-sensors/Kconfig
> +++ b/drivers/iio/common/hid-sensors/Kconfig
> @@ -25,13 +25,4 @@ config HID_SENSOR_IIO_TRIGGER
>  	  If this driver is compiled as a module, it will be named
>  	  hid-sensor-trigger.
>
> -config HID_SENSOR_ENUM_BASE_QUIRKS
> -	bool "ENUM base quirks for HID Sensor IIO drivers"
> -	depends on HID_SENSOR_IIO_COMMON
> -	help
> -	  Say yes here to build support for sensor hub FW using
> -	  enumeration, which is using 1 as base instead of 0.
> -	  Since logical minimum is still set 0 instead of 1,
> -	  there is no easy way to differentiate.
> -
>  endmenu
> diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
> index b6e77e0..781d3fa 100644
> --- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
> +++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
> @@ -33,24 +33,34 @@ static int hid_sensor_data_rdy_trigger_set_state(struct iio_trigger *trig,
>  {
>  	struct hid_sensor_common *st = iio_trigger_get_drvdata(trig);
>  	int state_val;
> +	int report_val;
>
>  	if (state) {
>  		if (sensor_hub_device_open(st->hsdev))
>  			return -EIO;
> -	} else
> +		state_val =
> +		HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM;
> +		report_val =
> +		HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM;
> +
> +	} else {
>  		sensor_hub_device_close(st->hsdev);
> +		state_val =
> +		HID_USAGE_SENSOR_PROP_POWER_STATE_D4_POWER_OFF_ENUM;
> +		report_val =
> +		HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM;
> +	}
>
> -	state_val = state ? 1 : 0;
> -	if (IS_ENABLED(CONFIG_HID_SENSOR_ENUM_BASE_QUIRKS))
> -		++state_val;
>  	st->data_ready = state;
> +	state_val += st->power_state.logical_minimum;
> +	report_val += st->report_state.logical_minimum;
>  	sensor_hub_set_feature(st->hsdev, st->power_state.report_id,
>  					st->power_state.index,
>  					(s32)state_val);
>
>  	sensor_hub_set_feature(st->hsdev, st->report_state.report_id,
>  					st->report_state.index,
> -					(s32)state_val);
> +					(s32)report_val);
>
>  	return 0;
>  }
> diff --git a/include/linux/hid-sensor-ids.h b/include/linux/hid-sensor-ids.h
> index 4f945d3..8323775 100644
> --- a/include/linux/hid-sensor-ids.h
> +++ b/include/linux/hid-sensor-ids.h
> @@ -117,4 +117,16 @@
>  #define HID_USAGE_SENSOR_PROP_REPORT_STATE			0x200316
>  #define HID_USAGE_SENSOR_PROY_POWER_STATE			0x200319
>
> +/* Power state enumerations */
> +#define HID_USAGE_SENSOR_PROP_POWER_STATE_UNDEFINED_ENUM		0x00
> +#define HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM		0x01
> +#define HID_USAGE_SENSOR_PROP_POWER_STATE_D1_LOW_POWER_ENUM		0x02
> +#define HID_USAGE_SENSOR_PROP_POWER_STATE_D2_STANDBY_WITH_WAKE_ENUM	0x03
> +#define HID_USAGE_SENSOR_PROP_POWER_STATE_D3_SLEEP_WITH_WAKE_ENUM	0x04
> +#define HID_USAGE_SENSOR_PROP_POWER_STATE_D4_POWER_OFF_ENUM		0x05
> +
> +/* Report State enumerations */
> +#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM		0x00
> +#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM		0x01
> +
>  #endif
>

Re: [PATCH 2/2] iio: hid-sensors: Fix power and report state

[Greg KH]

On Sat, Nov 30, 2013 at 11:28:16AM +0000, Jonathan Cameron wrote:
> On 11/27/13 22:19, Srinivas Pandruvada wrote:
> > In the original HID sensor hub firmwares all Named array enums were
> > to 0-based. But the most recent hub implemented as 1-based,
> > because of the implementation by one of the major OS vendor.
> > Using logical minimum for the field as the base of enum. So we add
> > logical minimum to the selector values before setting those fields.
> > Some sensor hub FWs already changed logical minimum from 0 to 1
> > to reflect this and hope every other vendor will follow.
> > There is no easy way to add a common HID quirk for NAry elements,
> > even if the standard specifies these field as NAry, the collection
> > used to describe selectors is still just "logical".
> >
> > Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
> 
> Looks like a good solution to me.
> 
> This one is a little interesting.  Technically I 'believe' we don't have
> a bug as it is possible to make these devices work via the kconfig option
> and it definitely isn't a regression.  As such I have applied this to the
> branch intended for the next kernel cycled (togreg) rather than to the
> fixes branch.
> 
> If people have a very strong feeling about this then shout reasonably quickly - I'll
> probably hold off sending that branch to Greg for a few days anyway.
> 
> I've cc'd GregKH to see if he has any input on the path this should take.

Making things "dynamic" and not depending on a random Kconfig option
(which one should a distro pick?) is a -fix in my mind...

thanks,

greg k-h

Re: [PATCH 2/2] iio: hid-sensors: Fix power and report state

[Srinivas Pandruvada]

On 11/30/2013 03:28 AM, Jonathan Cameron wrote:
> On 11/27/13 22:19, Srinivas Pandruvada wrote:
>> In the original HID sensor hub firmwares all Named array enums were
>> to 0-based. But the most recent hub implemented as 1-based,
>> because of the implementation by one of the major OS vendor.
>> Using logical minimum for the field as the base of enum. So we add
>> logical minimum to the selector values before setting those fields.
>> Some sensor hub FWs already changed logical minimum from 0 to 1
>> to reflect this and hope every other vendor will follow.
>> There is no easy way to add a common HID quirk for NAry elements,
>> even if the standard specifies these field as NAry, the collection
>> used to describe selectors is still just "logical".
>>
>> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
> Looks like a good solution to me.
>
> This one is a little interesting.  Technically I 'believe' we don't have
> a bug as it is possible to make these devices work via the kconfig option
> and it definitely isn't a regression.  As such I have applied this to the
> branch intended for the next kernel cycled (togreg) rather than to the
> fixes branch.
The intention of the patch (originally submitted with a quirk and module 
param, which was commented on by you and Jiri),
is also to bring report state enumeration also under the quirk to have 
"1" based same as power state.
So there is a fix to include reporting state enum also. So if possible, 
I would like to treat as bug fix.

Thanks,
Srinivas
> If people have a very strong feeling about this then shout reasonably quickly - I'll
> probably hold off sending that branch to Greg for a few days anyway.
>
> I've cc'd GregKH to see if he has any input on the path this should take.
>
> Jonathan
>
>> ---
>>   drivers/iio/common/hid-sensors/Kconfig              |  9 ---------
>>   drivers/iio/common/hid-sensors/hid-sensor-trigger.c | 20 +++++++++++++++-----
>>   include/linux/hid-sensor-ids.h                      | 12 ++++++++++++
>>   3 files changed, 27 insertions(+), 14 deletions(-)
>>
>> diff --git a/drivers/iio/common/hid-sensors/Kconfig b/drivers/iio/common/hid-sensors/Kconfig
>> index 1178121..39188b7 100644
>> --- a/drivers/iio/common/hid-sensors/Kconfig
>> +++ b/drivers/iio/common/hid-sensors/Kconfig
>> @@ -25,13 +25,4 @@ config HID_SENSOR_IIO_TRIGGER
>>   	  If this driver is compiled as a module, it will be named
>>   	  hid-sensor-trigger.
>>
>> -config HID_SENSOR_ENUM_BASE_QUIRKS
>> -	bool "ENUM base quirks for HID Sensor IIO drivers"
>> -	depends on HID_SENSOR_IIO_COMMON
>> -	help
>> -	  Say yes here to build support for sensor hub FW using
>> -	  enumeration, which is using 1 as base instead of 0.
>> -	  Since logical minimum is still set 0 instead of 1,
>> -	  there is no easy way to differentiate.
>> -
>>   endmenu
>> diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
>> index b6e77e0..781d3fa 100644
>> --- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
>> +++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
>> @@ -33,24 +33,34 @@ static int hid_sensor_data_rdy_trigger_set_state(struct iio_trigger *trig,
>>   {
>>   	struct hid_sensor_common *st = iio_trigger_get_drvdata(trig);
>>   	int state_val;
>> +	int report_val;
>>
>>   	if (state) {
>>   		if (sensor_hub_device_open(st->hsdev))
>>   			return -EIO;
>> -	} else
>> +		state_val =
>> +		HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM;
>> +		report_val =
>> +		HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM;
>> +
>> +	} else {
>>   		sensor_hub_device_close(st->hsdev);
>> +		state_val =
>> +		HID_USAGE_SENSOR_PROP_POWER_STATE_D4_POWER_OFF_ENUM;
>> +		report_val =
>> +		HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM;
>> +	}
>>
>> -	state_val = state ? 1 : 0;
>> -	if (IS_ENABLED(CONFIG_HID_SENSOR_ENUM_BASE_QUIRKS))
>> -		++state_val;
>>   	st->data_ready = state;
>> +	state_val += st->power_state.logical_minimum;
>> +	report_val += st->report_state.logical_minimum;
>>   	sensor_hub_set_feature(st->hsdev, st->power_state.report_id,
>>   					st->power_state.index,
>>   					(s32)state_val);
>>
>>   	sensor_hub_set_feature(st->hsdev, st->report_state.report_id,
>>   					st->report_state.index,
>> -					(s32)state_val);
>> +					(s32)report_val);
>>
>>   	return 0;
>>   }
>> diff --git a/include/linux/hid-sensor-ids.h b/include/linux/hid-sensor-ids.h
>> index 4f945d3..8323775 100644
>> --- a/include/linux/hid-sensor-ids.h
>> +++ b/include/linux/hid-sensor-ids.h
>> @@ -117,4 +117,16 @@
>>   #define HID_USAGE_SENSOR_PROP_REPORT_STATE			0x200316
>>   #define HID_USAGE_SENSOR_PROY_POWER_STATE			0x200319
>>
>> +/* Power state enumerations */
>> +#define HID_USAGE_SENSOR_PROP_POWER_STATE_UNDEFINED_ENUM		0x00
>> +#define HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM		0x01
>> +#define HID_USAGE_SENSOR_PROP_POWER_STATE_D1_LOW_POWER_ENUM		0x02
>> +#define HID_USAGE_SENSOR_PROP_POWER_STATE_D2_STANDBY_WITH_WAKE_ENUM	0x03
>> +#define HID_USAGE_SENSOR_PROP_POWER_STATE_D3_SLEEP_WITH_WAKE_ENUM	0x04
>> +#define HID_USAGE_SENSOR_PROP_POWER_STATE_D4_POWER_OFF_ENUM		0x05
>> +
>> +/* Report State enumerations */
>> +#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM		0x00
>> +#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM		0x01
>> +
>>   #endif
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

Re: [PATCH 2/2] iio: hid-sensors: Fix power and report state

[Jonathan Cameron]

Srinivas Pandruvada <srinivas.pandruvada-VuQAYsv1563Yd54FQh9/CA@public.gmane.org> wrote:
>On 11/30/2013 03:28 AM, Jonathan Cameron wrote:
>> On 11/27/13 22:19, Srinivas Pandruvada wrote:
>>> In the original HID sensor hub firmwares all Named array enums were
>>> to 0-based. But the most recent hub implemented as 1-based,
>>> because of the implementation by one of the major OS vendor.
>>> Using logical minimum for the field as the base of enum. So we add
>>> logical minimum to the selector values before setting those fields.
>>> Some sensor hub FWs already changed logical minimum from 0 to 1
>>> to reflect this and hope every other vendor will follow.
>>> There is no easy way to add a common HID quirk for NAry elements,
>>> even if the standard specifies these field as NAry, the collection
>>> used to describe selectors is still just "logical".
>>>
>>> Signed-off-by: Srinivas Pandruvada
><srinivas.pandruvada-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
>> Looks like a good solution to me.
>>
>> This one is a little interesting.  Technically I 'believe' we don't
>have
>> a bug as it is possible to make these devices work via the kconfig
>option
>> and it definitely isn't a regression.  As such I have applied this to
>the
>> branch intended for the next kernel cycled (togreg) rather than to
>the
>> fixes branch.
>The intention of the patch (originally submitted with a quirk and
>module 
>param, which was commented on by you and Jiri),
>is also to bring report state enumeration also under the quirk to have 
>"1" based same as power state.
>So there is a fix to include reporting state enum also. So if possible,
>
>I would like to treat as bug fix.

Will do then.
>
>Thanks,
>Srinivas
>> If people have a very strong feeling about this then shout reasonably
>quickly - I'll
>> probably hold off sending that branch to Greg for a few days anyway.
>>
>> I've cc'd GregKH to see if he has any input on the path this should
>take.
>>
>> Jonathan
>>
>>> ---
>>>   drivers/iio/common/hid-sensors/Kconfig              |  9 ---------
>>>   drivers/iio/common/hid-sensors/hid-sensor-trigger.c | 20
>+++++++++++++++-----
>>>   include/linux/hid-sensor-ids.h                      | 12
>++++++++++++
>>>   3 files changed, 27 insertions(+), 14 deletions(-)
>>>
>>> diff --git a/drivers/iio/common/hid-sensors/Kconfig
>b/drivers/iio/common/hid-sensors/Kconfig
>>> index 1178121..39188b7 100644
>>> --- a/drivers/iio/common/hid-sensors/Kconfig
>>> +++ b/drivers/iio/common/hid-sensors/Kconfig
>>> @@ -25,13 +25,4 @@ config HID_SENSOR_IIO_TRIGGER
>>>   	  If this driver is compiled as a module, it will be named
>>>   	  hid-sensor-trigger.
>>>
>>> -config HID_SENSOR_ENUM_BASE_QUIRKS
>>> -	bool "ENUM base quirks for HID Sensor IIO drivers"
>>> -	depends on HID_SENSOR_IIO_COMMON
>>> -	help
>>> -	  Say yes here to build support for sensor hub FW using
>>> -	  enumeration, which is using 1 as base instead of 0.
>>> -	  Since logical minimum is still set 0 instead of 1,
>>> -	  there is no easy way to differentiate.
>>> -
>>>   endmenu
>>> diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
>b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
>>> index b6e77e0..781d3fa 100644
>>> --- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
>>> +++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
>>> @@ -33,24 +33,34 @@ static int
>hid_sensor_data_rdy_trigger_set_state(struct iio_trigger *trig,
>>>   {
>>>   	struct hid_sensor_common *st = iio_trigger_get_drvdata(trig);
>>>   	int state_val;
>>> +	int report_val;
>>>
>>>   	if (state) {
>>>   		if (sensor_hub_device_open(st->hsdev))
>>>   			return -EIO;
>>> -	} else
>>> +		state_val =
>>> +		HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM;
>>> +		report_val =
>>> +		HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM;
>>> +
>>> +	} else {
>>>   		sensor_hub_device_close(st->hsdev);
>>> +		state_val =
>>> +		HID_USAGE_SENSOR_PROP_POWER_STATE_D4_POWER_OFF_ENUM;
>>> +		report_val =
>>> +		HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM;
>>> +	}
>>>
>>> -	state_val = state ? 1 : 0;
>>> -	if (IS_ENABLED(CONFIG_HID_SENSOR_ENUM_BASE_QUIRKS))
>>> -		++state_val;
>>>   	st->data_ready = state;
>>> +	state_val += st->power_state.logical_minimum;
>>> +	report_val += st->report_state.logical_minimum;
>>>   	sensor_hub_set_feature(st->hsdev, st->power_state.report_id,
>>>   					st->power_state.index,
>>>   					(s32)state_val);
>>>
>>>   	sensor_hub_set_feature(st->hsdev, st->report_state.report_id,
>>>   					st->report_state.index,
>>> -					(s32)state_val);
>>> +					(s32)report_val);
>>>
>>>   	return 0;
>>>   }
>>> diff --git a/include/linux/hid-sensor-ids.h
>b/include/linux/hid-sensor-ids.h
>>> index 4f945d3..8323775 100644
>>> --- a/include/linux/hid-sensor-ids.h
>>> +++ b/include/linux/hid-sensor-ids.h
>>> @@ -117,4 +117,16 @@
>>>   #define HID_USAGE_SENSOR_PROP_REPORT_STATE			0x200316
>>>   #define HID_USAGE_SENSOR_PROY_POWER_STATE			0x200319
>>>
>>> +/* Power state enumerations */
>>> +#define HID_USAGE_SENSOR_PROP_POWER_STATE_UNDEFINED_ENUM		0x00
>>> +#define HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM		0x01
>>> +#define HID_USAGE_SENSOR_PROP_POWER_STATE_D1_LOW_POWER_ENUM		0x02
>>> +#define
>HID_USAGE_SENSOR_PROP_POWER_STATE_D2_STANDBY_WITH_WAKE_ENUM	0x03
>>> +#define
>HID_USAGE_SENSOR_PROP_POWER_STATE_D3_SLEEP_WITH_WAKE_ENUM	0x04
>>> +#define HID_USAGE_SENSOR_PROP_POWER_STATE_D4_POWER_OFF_ENUM		0x05
>>> +
>>> +/* Report State enumerations */
>>> +#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM		0x00
>>> +#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM		0x01
>>> +
>>>   #endif
>>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe
>linux-input" in
>> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
>
>--
>To unsubscribe from this list: send the line "unsubscribe linux-iio" in
>the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
Sent from my Android phone with K-9 Mail. Please excuse my brevity.

Re: [PATCH 1/2] HID: hid-sensor-hub: Add logical min and max

[Jonathan Cameron]

On 11/27/13 22:19, Srinivas Pandruvada wrote:
> Exporting logical minimum and maximum of HID fields as part of the
> hid sensor attribute info. This can be used for range checking and
> to calculate enumeration base for NAry fields of HID sensor hub.
> 
> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Hi,  I would have preffred this being done in two patches, the first
refactoring the function call and the second doing the min and max.

Anyhow, I'll take it anyway.

Applied to the togreg branch of iio.git.


> ---
>  drivers/hid/hid-sensor-hub.c   | 20 ++++++++------------
>  include/linux/hid-sensor-hub.h |  2 ++
>  2 files changed, 10 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c
> index a184e19..d87f7cb 100644
> --- a/drivers/hid/hid-sensor-hub.c
> +++ b/drivers/hid/hid-sensor-hub.c
> @@ -112,13 +112,15 @@ static int sensor_hub_get_physical_device_count(
>  
>  static void sensor_hub_fill_attr_info(
>  		struct hid_sensor_hub_attribute_info *info,
> -		s32 index, s32 report_id, s32 units, s32 unit_expo, s32 size)
> +		s32 index, s32 report_id, struct hid_field *field)
>  {
>  	info->index = index;
>  	info->report_id = report_id;
> -	info->units = units;
> -	info->unit_expo = unit_expo;
> -	info->size = size/8;
> +	info->units = field->unit;
> +	info->unit_expo = field->unit_exponent;
> +	info->size = (field->report_size * field->report_count)/8;
> +	info->logical_minimum = field->logical_minimum;
> +	info->logical_maximum = field->logical_maximum;
>  }
>  
>  static struct hid_sensor_hub_callbacks *sensor_hub_get_callback(
> @@ -325,9 +327,7 @@ int sensor_hub_input_get_attribute_info(struct hid_sensor_hub_device *hsdev,
>  			if (field->physical == usage_id &&
>  				field->logical == attr_usage_id) {
>  				sensor_hub_fill_attr_info(info, i, report->id,
> -					field->unit, field->unit_exponent,
> -					field->report_size *
> -							field->report_count);
> +							  field);
>  				ret = 0;
>  			} else {
>  				for (j = 0; j < field->maxusage; ++j) {
> @@ -336,11 +336,7 @@ int sensor_hub_input_get_attribute_info(struct hid_sensor_hub_device *hsdev,
>  					field->usage[j].collection_index ==
>  					collection_index) {
>  						sensor_hub_fill_attr_info(info,
> -							i, report->id,
> -							field->unit,
> -							field->unit_exponent,
> -							field->report_size *
> -							field->report_count);
> +							  i, report->id, field);
>  						ret = 0;
>  						break;
>  					}
> diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h
> index a265af2..fd66e45 100644
> --- a/include/linux/hid-sensor-hub.h
> +++ b/include/linux/hid-sensor-hub.h
> @@ -40,6 +40,8 @@ struct hid_sensor_hub_attribute_info {
>  	s32 units;
>  	s32 unit_expo;
>  	s32 size;
> +	s32 logical_minimum;
> +	s32 logical_maximum;
>  };
>  
>  /**
> 

Re: [PATCH 1/2] HID: hid-sensor-hub: Add logical min and max

[Jiri Kosina]

On Sat, 30 Nov 2013, Jonathan Cameron wrote:

> On 11/27/13 22:19, Srinivas Pandruvada wrote:
> > Exporting logical minimum and maximum of HID fields as part of the
> > hid sensor attribute info. This can be used for range checking and
> > to calculate enumeration base for NAry fields of HID sensor hub.
> > 
> > Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
> Hi,  I would have preffred this being done in two patches, the first
> refactoring the function call and the second doing the min and max.
> 
> Anyhow, I'll take it anyway.
> 
> Applied to the togreg branch of iio.git.

Where is that? I don't seem to see it in 

	https://git.kernel.org/cgit/linux/kernel/git/jic23/iio.git/log/?h=togreg

-- 
Jiri Kosina
SUSE Labs

Re: [PATCH 1/2] HID: hid-sensor-hub: Add logical min and max

[Jonathan Cameron]

Hi Jiri

I tend to push a testing branch to catch any build issues before pushing to the real togreg branch. Normally there are only a few hours on between but sometimes it is a few days as here.  I will move these to the fixes-togreg branch - hopefully this evening...

Jiri Kosina <jkosina@suse.cz> wrote:
>On Sat, 30 Nov 2013, Jonathan Cameron wrote:
>
>> On 11/27/13 22:19, Srinivas Pandruvada wrote:
>> > Exporting logical minimum and maximum of HID fields as part of the
>> > hid sensor attribute info. This can be used for range checking and
>> > to calculate enumeration base for NAry fields of HID sensor hub.
>> > 
>> > Signed-off-by: Srinivas Pandruvada
><srinivas.pandruvada@linux.intel.com>
>> Hi,  I would have preffred this being done in two patches, the first
>> refactoring the function call and the second doing the min and max.
>> 
>> Anyhow, I'll take it anyway.
>> 
>> Applied to the togreg branch of iio.git.
>
>Where is that? I don't seem to see it in 
>
>	https://git.kernel.org/cgit/linux/kernel/git/jic23/iio.git/log/?h=togreg

-- 
Sent from my Android phone with K-9 Mail. Please excuse my brevity.

Re: [PATCH 1/2] HID: hid-sensor-hub: Add logical min and max

[Jonathan Cameron]

On 12/02/13 17:14, Jonathan Cameron wrote:
> Hi Jiri
>
> I tend to push a testing branch to catch any build issues before pushing to the real togreg branch. Normally there are only a few hours on between but sometimes it is a few days as here.  I will move these to the fixes-togreg branch - hopefully this evening...

Now applied to the fixes-togreg branch (this one does get pushed out to kernel.org
directly!)
>
> Jiri Kosina <jkosina-AlSwsSmVLrQ@public.gmane.org> wrote:
>> On Sat, 30 Nov 2013, Jonathan Cameron wrote:
>>
>>> On 11/27/13 22:19, Srinivas Pandruvada wrote:
>>>> Exporting logical minimum and maximum of HID fields as part of the
>>>> hid sensor attribute info. This can be used for range checking and
>>>> to calculate enumeration base for NAry fields of HID sensor hub.
>>>>
>>>> Signed-off-by: Srinivas Pandruvada
>> <srinivas.pandruvada-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
>>> Hi,  I would have preffred this being done in two patches, the first
>>> refactoring the function call and the second doing the min and max.
>>>
>>> Anyhow, I'll take it anyway.
>>>
>>> Applied to the togreg branch of iio.git.
>> Where is that? I don't seem to see it in 
>>
>> 	https://git.kernel.org/cgit/linux/kernel/git/jic23/iio.git/log/?h=togreg