From: Roger Quadros <rogerq@ti.com>
To: dmitry.torokhov@gmail.com
Cc: rydberg@euromail.se, jcbian@pixcir.com.cn,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, Roger Quadros <rogerq@ti.com>
Subject: [PATCH 6/9] Input: pixcir_i2c_ts: Add chip specific data structure
Date: Wed, 18 Dec 2013 14:51:17 +0530 [thread overview]
Message-ID: <1387358480-8313-7-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1387358480-8313-1-git-send-email-rogerq@ti.com>
This is the data that differentiates different pixcir
chips.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
---
drivers/input/touchscreen/pixcir_i2c_ts.c | 8 +++++---
include/linux/input/pixcir_ts.h | 11 +++++++++++
2 files changed, 16 insertions(+), 3 deletions(-)
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index a783d94..ff68246 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -32,7 +32,7 @@
struct pixcir_i2c_ts_data {
struct i2c_client *client;
struct input_dev *input;
- const struct pixcir_ts_platform_data *chip;
+ const struct pixcir_ts_platform_data *pdata;
bool exiting;
};
@@ -91,7 +91,7 @@ static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data)
static irqreturn_t pixcir_ts_isr(int irq, void *dev_id)
{
struct pixcir_i2c_ts_data *tsdata = dev_id;
- const struct pixcir_ts_platform_data *pdata = tsdata->chip;
+ const struct pixcir_ts_platform_data *pdata = tsdata->pdata;
while (!tsdata->exiting) {
pixcir_ts_poscheck(tsdata);
@@ -301,6 +301,8 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev)
if (!pdata)
return ERR_PTR(-ENOMEM);
+ pdata->chip = *(const struct pixcir_i2c_chip_data *)match->data;
+
pdata->gpio_attb = of_get_named_gpio(np, "attb-gpio", 0);
if (!gpio_is_valid(pdata->gpio_attb)) {
dev_err(dev, "Failed to get ATTB GPIO\n");
@@ -366,7 +368,7 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
tsdata->client = client;
tsdata->input = input;
- tsdata->chip = pdata;
+ tsdata->pdata = pdata;
input->name = client->name;
input->id.bustype = BUS_I2C;
diff --git a/include/linux/input/pixcir_ts.h b/include/linux/input/pixcir_ts.h
index 88ffdb50..b9a2f6f 100644
--- a/include/linux/input/pixcir_ts.h
+++ b/include/linux/input/pixcir_ts.h
@@ -43,10 +43,21 @@ enum pixcir_int_mode {
#define PIXCIR_INT_ENABLE (1UL << 3)
#define PIXCIR_INT_POL_HIGH (1UL << 2)
+/**
+ * struct pixcir_irc_chip_data - chip related data
+ * @num_report_ids: Max number of finger ids reported simultaneously.
+ * if 0 it means chip doesn't support finger id reporting
+ * and driver will resort to Type A Multi-Touch reporting.
+ */
+struct pixcir_i2c_chip_data {
+ u8 num_report_ids;
+};
+
struct pixcir_ts_platform_data {
unsigned int x_size; /* X axis resolution */
unsigned int y_size; /* Y axis resolution */
int gpio_attb; /* GPIO connected to ATTB line */
+ struct pixcir_i2c_chip_data chip;
};
#endif
--
1.8.3.2
next prev parent reply other threads:[~2013-12-18 9:21 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-18 9:21 [PATCH 0/9] Input: pixcir_i2c_ts: Add Type-B Multitouch support Roger Quadros
2013-12-18 9:21 ` [PATCH 1/9] Input: pixcir_i2c_ts: Add device tree support Roger Quadros
2013-12-18 14:09 ` Dmitry Torokhov
2013-12-19 6:12 ` Roger Quadros
2013-12-18 9:21 ` [PATCH 2/9] Input: pixcir_i2c_ts: Add register definitions Roger Quadros
2013-12-18 14:09 ` Dmitry Torokhov
2013-12-18 9:21 ` [PATCH 3/9] Input: pixcir_i2c_ts: Initialize interrupt mode and power mode Roger Quadros
[not found] ` <1387358480-8313-4-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2013-12-18 14:14 ` Dmitry Torokhov
2013-12-19 5:57 ` Roger Quadros
2013-12-18 9:21 ` [PATCH 4/9] Input: pixcir_i2c_ts: Use devres managed resource allocations Roger Quadros
2013-12-18 14:15 ` Dmitry Torokhov
2013-12-18 9:21 ` [PATCH 5/9] Input: pixcir_i2c_ts: Get rid of pdata->attb_read_val() Roger Quadros
2013-12-18 14:20 ` Dmitry Torokhov
2013-12-19 5:54 ` Roger Quadros
2013-12-18 9:21 ` Roger Quadros [this message]
2013-12-18 9:21 ` [PATCH 7/9] Input: pixcir_i2c_ts: Implement Type B Multi Touch reporting Roger Quadros
2013-12-18 14:18 ` Dmitry Torokhov
[not found] ` <20131218141841.GE28504-WlK9ik9hQGAhIp7JRqBPierSzoNAToWh@public.gmane.org>
2013-12-19 5:49 ` Roger Quadros
2013-12-21 20:02 ` Henrik Rydberg
2013-12-18 9:21 ` [PATCH 8/9] Input: pixcir_i2c_ts: Add support for TangoC family Roger Quadros
2013-12-18 9:21 ` [PATCH 9/9] Input: pixcir_i2c_ts: Implement wakeup from suspend Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1387358480-8313-7-git-send-email-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=jcbian@pixcir.com.cn \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rydberg@euromail.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).