From: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
To: dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Cc: rydberg-Hk7bIW8heu4wFerOooGFRg@public.gmane.org,
jcbian-mY6CKx1T+M6Pt1CcHtbs0g@public.gmane.org,
balbi-l0cyMroinI0@public.gmane.org,
dmurphy-l0cyMroinI0@public.gmane.org,
mugunthanvnm-l0cyMroinI0@public.gmane.org,
linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
Subject: [PATCH v2 4/8] Input: pixcir_i2c_ts: Use Type-B Multi-Touch protocol
Date: Wed, 26 Feb 2014 17:28:02 +0200 [thread overview]
Message-ID: <1393428486-15001-5-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1393428486-15001-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
Switch to using the Type-B Multi-Touch protocol.
Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
---
drivers/input/touchscreen/pixcir_i2c_ts.c | 125 ++++++++++++++++++++++--------
1 file changed, 94 insertions(+), 31 deletions(-)
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index fe17b41..8736f71 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -23,9 +23,12 @@
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/input.h>
+#include <linux/input/mt.h>
#include <linux/input/pixcir_ts.h>
#include <linux/gpio.h>
+#define PIXCIR_MAX_SLOTS 2
+
struct pixcir_i2c_ts_data {
struct i2c_client *client;
struct input_dev *input;
@@ -33,12 +36,25 @@ struct pixcir_i2c_ts_data {
bool exiting;
};
-static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data)
+struct pixcir_touch {
+ int x;
+ int y;
+};
+
+struct pixcir_report_data {
+ int num_touches;
+ struct pixcir_touch touches[PIXCIR_MAX_SLOTS];
+};
+
+static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata,
+ struct pixcir_report_data *report)
{
- struct pixcir_i2c_ts_data *tsdata = data;
u8 rdbuf[10], wrbuf[1] = { 0 };
+ u8 *bufptr;
u8 touch;
- int ret;
+ int ret, i;
+
+ memset(report, 0, sizeof(struct pixcir_report_data));
ret = i2c_master_send(tsdata->client, wrbuf, sizeof(wrbuf));
if (ret != sizeof(wrbuf)) {
@@ -56,45 +72,85 @@ static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data)
return;
}
- touch = rdbuf[0];
- if (touch) {
- u16 posx1 = (rdbuf[3] << 8) | rdbuf[2];
- u16 posy1 = (rdbuf[5] << 8) | rdbuf[4];
- u16 posx2 = (rdbuf[7] << 8) | rdbuf[6];
- u16 posy2 = (rdbuf[9] << 8) | rdbuf[8];
-
- input_report_key(tsdata->input, BTN_TOUCH, 1);
- input_report_abs(tsdata->input, ABS_X, posx1);
- input_report_abs(tsdata->input, ABS_Y, posy1);
-
- input_report_abs(tsdata->input, ABS_MT_POSITION_X, posx1);
- input_report_abs(tsdata->input, ABS_MT_POSITION_Y, posy1);
- input_mt_sync(tsdata->input);
-
- if (touch == 2) {
- input_report_abs(tsdata->input,
- ABS_MT_POSITION_X, posx2);
- input_report_abs(tsdata->input,
- ABS_MT_POSITION_Y, posy2);
- input_mt_sync(tsdata->input);
- }
- } else {
- input_report_key(tsdata->input, BTN_TOUCH, 0);
+ touch = rdbuf[0] & 0x7;
+ if (touch > PIXCIR_MAX_SLOTS)
+ touch = PIXCIR_MAX_SLOTS;
+
+ report->num_touches = touch;
+ bufptr = &rdbuf[2];
+
+ for (i = 0; i < touch; i++) {
+ report->touches[i].x = (bufptr[1] << 8) | bufptr[0];
+ report->touches[i].y = (bufptr[3] << 8) | bufptr[2];
+
+ bufptr = &bufptr[4];
}
+}
+
+static void pixcir_ts_report(struct pixcir_i2c_ts_data *ts,
+ struct pixcir_report_data *report)
+{
+ struct input_mt_pos pos[PIXCIR_MAX_SLOTS];
+ int slots[PIXCIR_MAX_SLOTS];
+ struct pixcir_touch *touch;
+ int n, i, slot;
+ struct device *dev = &ts->client->dev;
- input_sync(tsdata->input);
+ n = report->num_touches;
+ if (n > PIXCIR_MAX_SLOTS)
+ n = PIXCIR_MAX_SLOTS;
+
+ for (i = 0; i < n; i++) {
+ touch = &report->touches[i];
+ pos[i].x = touch->x;
+ pos[i].y = touch->y;
+ }
+
+ input_mt_assign_slots(ts->input, slots, pos, n);
+
+ for (i = 0; i < n; i++) {
+ touch = &report->touches[i];
+ slot = slots[i];
+
+ input_mt_slot(ts->input, slot);
+ input_mt_report_slot_state(ts->input,
+ MT_TOOL_FINGER, true);
+
+ input_event(ts->input, EV_ABS, ABS_MT_POSITION_X, touch->x);
+ input_event(ts->input, EV_ABS, ABS_MT_POSITION_Y, touch->y);
+
+ dev_dbg(dev, "%d: slot %d, x %d, y %d\n",
+ i, slot, touch->x, touch->y);
+ }
+
+ input_mt_sync_frame(ts->input);
+ input_sync(ts->input);
}
static irqreturn_t pixcir_ts_isr(int irq, void *dev_id)
{
struct pixcir_i2c_ts_data *tsdata = dev_id;
const struct pixcir_ts_platform_data *pdata = tsdata->chip;
+ struct pixcir_report_data report;
while (!tsdata->exiting) {
- pixcir_ts_poscheck(tsdata);
-
- if (gpio_get_value(pdata->gpio_attb))
+ /* parse packet */
+ pixcir_ts_parse(tsdata, &report);
+
+ /* report it */
+ pixcir_ts_report(tsdata, &report);
+
+ if (gpio_get_value(pdata->gpio_attb)) {
+ if (report.num_touches) {
+ /*
+ * Last report with no finger up?
+ * Do it now then.
+ */
+ input_mt_sync_frame(tsdata->input);
+ input_sync(tsdata->input);
+ }
break;
+ }
msleep(20);
}
@@ -330,6 +386,13 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
input_set_abs_params(input, ABS_MT_POSITION_X, 0, pdata->x_max, 0, 0);
input_set_abs_params(input, ABS_MT_POSITION_Y, 0, pdata->y_max, 0, 0);
+ error = input_mt_init_slots(input, PIXCIR_MAX_SLOTS,
+ INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+ if (error) {
+ dev_err(dev, "Error initializing Multi-Touch slots\n");
+ return error;
+ }
+
input_set_drvdata(input, tsdata);
error = devm_gpio_request_one(dev, pdata->gpio_attb,
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-02-26 15:28 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-26 15:27 [PATCH v2 0/8] Input: pixcir_i2c_ts: Add Type-B Multi-touch and DT support Roger Quadros
2014-02-26 15:27 ` [PATCH v2 1/8] Input: pixcir_i2c_ts: Use devres managed resource allocations Roger Quadros
2014-02-26 15:28 ` [PATCH v2 2/8] Input: pixcir_i2c_ts: Initialize interrupt mode and power mode Roger Quadros
2014-02-26 15:28 ` [PATCH v2 3/8] Input: pixcir_i2c_ts: Get rid of pdata->attb_read_val() Roger Quadros
2014-02-26 15:41 ` Felipe Balbi
[not found] ` <1393428486-15001-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2014-02-26 15:28 ` Roger Quadros [this message]
2014-03-08 15:11 ` [PATCH v2 4/8] Input: pixcir_i2c_ts: Use Type-B Multi-Touch protocol Henrik Rydberg
2014-03-10 8:57 ` Roger Quadros
2014-03-10 16:37 ` Felipe Balbi
2014-03-11 9:35 ` Roger Quadros
2014-03-19 11:27 ` Roger Quadros
2014-02-26 15:28 ` [PATCH v2 5/8] Input: pixcir_i2c_ts: support upto 5 fingers and hardware provided tracking IDs Roger Quadros
2014-02-26 15:28 ` [PATCH v2 6/8] Input: pixcir_i2c_ts: Implement wakeup from suspend Roger Quadros
2014-02-26 15:28 ` [PATCH v2 7/8] Input: pixcir_i2c_ts: Add device tree support Roger Quadros
2014-02-26 15:28 ` [PATCH v2 8/8] ARM: dts: am43x-epos-evm: Correct Touch controller info Roger Quadros
2014-03-04 11:24 ` [PATCH v2 0/8] Input: pixcir_i2c_ts: Add Type-B Multi-touch and DT support Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393428486-15001-5-git-send-email-rogerq@ti.com \
--to=rogerq-l0cymroini0@public.gmane.org \
--cc=balbi-l0cyMroinI0@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=dmurphy-l0cyMroinI0@public.gmane.org \
--cc=jcbian-mY6CKx1T+M6Pt1CcHtbs0g@public.gmane.org \
--cc=linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mugunthanvnm-l0cyMroinI0@public.gmane.org \
--cc=rydberg-Hk7bIW8heu4wFerOooGFRg@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).