linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Carlo Caione <carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
	maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
	hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
	emilio-0Z03zUJReD5OxF6Tv1QG9Q@public.gmane.org,
	wens-jdAy2FN1RRM@public.gmane.org,
	sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org,
	dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Cc: Carlo Caione <carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org>
Subject: [PATCH v3 04/10] input: misc: Add driver for AXP20x Power Enable Key
Date: Thu, 27 Mar 2014 22:29:18 +0100	[thread overview]
Message-ID: <1395955764-18103-5-git-send-email-carlo@caione.org> (raw)
In-Reply-To: <1395955764-18103-1-git-send-email-carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org>

This patch add support for the Power Enable Key found on MFD AXP202 and
AXP209. Besides the basic support for the button, the driver adds two
entries in sysfs to configure the time delay for power on/off.

Signed-off-by: Carlo Caione <carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org>
---
 drivers/input/misc/Kconfig      |  11 ++
 drivers/input/misc/Makefile     |   1 +
 drivers/input/misc/axp20x-pek.c | 260 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 272 insertions(+)
 create mode 100644 drivers/input/misc/axp20x-pek.c

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 7904ab0..87244fb 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -393,6 +393,17 @@ config INPUT_RETU_PWRBUTTON
 	  To compile this driver as a module, choose M here. The module will
 	  be called retu-pwrbutton.
 
+config INPUT_AXP20X_PEK
+	tristate "X-Powers AXP20X power button driver"
+	depends on MFD_AXP20X
+	help
+	  Say Y here if you want to enable power key reporting via the
+	  AXP20X PMIC.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called axp20x-pek.
+
+
 config INPUT_TWL4030_PWRBUTTON
 	tristate "TWL4030 Power button Driver"
 	depends on TWL4030_CORE
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index cda71fc..624abf5 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_INPUT_POWERMATE)		+= powermate.o
 obj-$(CONFIG_INPUT_PWM_BEEPER)		+= pwm-beeper.o
 obj-$(CONFIG_INPUT_RB532_BUTTON)	+= rb532_button.o
 obj-$(CONFIG_INPUT_RETU_PWRBUTTON)	+= retu-pwrbutton.o
+obj-$(CONFIG_INPUT_AXP20X_PEK)		+= axp20x-pek.o
 obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER)	+= rotary_encoder.o
 obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
 obj-$(CONFIG_INPUT_SIRFSOC_ONKEY)	+= sirfsoc-onkey.o
diff --git a/drivers/input/misc/axp20x-pek.c b/drivers/input/misc/axp20x-pek.c
new file mode 100644
index 0000000..6698a69
--- /dev/null
+++ b/drivers/input/misc/axp20x-pek.c
@@ -0,0 +1,260 @@
+/*
+ * axp20x power button driver.
+ *
+ * Copyright (C) 2013 Carlo Caione <carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/errno.h>
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define AXP20X_PEK_STARTUP_MASK		(0xc0)
+#define AXP20X_PEK_SHUTDOWN_MASK	(0x03)
+
+static const char const *startup_time[] = { "128ms", "3s" , "1s", "2s" };
+static const char const *shutdown_time[] = { "4s", "6s" , "8s", "10s" };
+
+struct axp20x_pek {
+	struct axp20x_dev *axp20x;
+	struct input_dev *input;
+	int irq_dbr;
+	int irq_dbf;
+};
+
+struct axp20x_pek_ext_attr {
+	const char const **str;
+	unsigned int mask;
+};
+
+static struct axp20x_pek_ext_attr axp20x_pek_startup_ext_attr = {
+	.str	= startup_time,
+	.mask	= AXP20X_PEK_STARTUP_MASK,
+};
+
+static struct axp20x_pek_ext_attr axp20x_pek_shutdown_ext_attr = {
+	.str	= shutdown_time,
+	.mask	= AXP20X_PEK_SHUTDOWN_MASK,
+};
+
+static struct axp20x_pek_ext_attr *get_axp_ext_attr(struct device_attribute *attr)
+{
+	return container_of(attr, struct dev_ext_attribute, attr)->var;
+}
+
+static ssize_t axp20x_show_ext_attr(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev);
+	struct axp20x_pek_ext_attr *axp20x_ea = get_axp_ext_attr(attr);
+	unsigned int val;
+	int ret, i;
+	int cnt = 0;
+
+	ret = regmap_read(axp20x_pek->axp20x->regmap, AXP20X_PEK_KEY, &val);
+	if (ret != 0)
+		return ret;
+
+	val &= axp20x_ea->mask;
+	val >>= ffs(axp20x_ea->mask) - 1;
+
+	for (i = 0; i < 4; i++) {
+		if (val == i)
+			cnt += sprintf(buf + cnt, "[%s] ", axp20x_ea->str[i]);
+		else
+			cnt += sprintf(buf + cnt, "%s ", axp20x_ea->str[i]);
+	}
+
+	cnt += sprintf(buf + cnt, "\n");
+
+	return cnt;
+}
+
+static ssize_t axp20x_store_ext_attr(struct device *dev, struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev);
+	struct axp20x_pek_ext_attr *axp20x_ea = get_axp_ext_attr(attr);
+	char val_str[20];
+	int ret, i;
+	size_t len;
+
+	val_str[sizeof(val_str) - 1] = '\0';
+	strncpy(val_str, buf, sizeof(val_str) - 1);
+	len = strlen(val_str);
+
+	if (len && val_str[len - 1] == '\n')
+		val_str[len - 1] = '\0';
+
+	for (i = 0; i < 4; i++) {
+		if (!strcmp(val_str, axp20x_ea->str[i])) {
+
+			i <<= ffs(axp20x_ea->mask) - 1;
+			ret = regmap_update_bits(axp20x_pek->axp20x->regmap,
+						 AXP20X_PEK_KEY,
+						 axp20x_ea->mask, i);
+			if (ret != 0)
+				return -EINVAL;
+			return count;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static struct dev_ext_attribute axp20x_dev_attr_startup = {
+	.attr	= __ATTR(startup, 0644, axp20x_show_ext_attr, axp20x_store_ext_attr),
+	.var	= &axp20x_pek_startup_ext_attr
+};
+
+static struct dev_ext_attribute axp20x_dev_attr_shutdown = {
+	__ATTR(shutdown, 0644, axp20x_show_ext_attr, axp20x_store_ext_attr),
+	&axp20x_pek_shutdown_ext_attr
+};
+
+static struct attribute *dev_attrs[] = {
+	&axp20x_dev_attr_startup.attr.attr,
+	&axp20x_dev_attr_shutdown.attr.attr,
+	NULL,
+};
+
+static struct attribute_group dev_attr_group = {
+	.attrs	= dev_attrs,
+};
+
+static const struct attribute_group *dev_attr_groups[] = {
+	&dev_attr_group,
+	NULL,
+};
+
+static irqreturn_t axp20x_pek_irq(int irq, void *pwr)
+{
+	struct input_dev *idev = pwr;
+	struct axp20x_pek *axp20x_pek = input_get_drvdata(idev);
+
+	if (irq == axp20x_pek->irq_dbr)
+		input_report_key(idev, KEY_POWER, true);
+	else if (irq == axp20x_pek->irq_dbf)
+		input_report_key(idev, KEY_POWER, false);
+
+	input_sync(idev);
+
+	return IRQ_HANDLED;
+}
+
+static int axp20x_pek_probe(struct platform_device *pdev)
+{
+	struct axp20x_pek *axp20x_pek;
+	struct axp20x_dev *axp20x;
+	struct input_dev *idev;
+	int error;
+
+	axp20x_pek = devm_kzalloc(&pdev->dev, sizeof(struct axp20x_pek),
+				  GFP_KERNEL);
+	if (!axp20x_pek)
+		return -ENOMEM;
+
+	axp20x_pek->axp20x = dev_get_drvdata(pdev->dev.parent);
+	axp20x = axp20x_pek->axp20x;
+
+	axp20x_pek->irq_dbr = platform_get_irq_byname(pdev, "PEK_DBR");
+	if (axp20x_pek->irq_dbr < 0) {
+		dev_err(&pdev->dev, "No IRQ for PEK_DBR, error=%d\n",
+				axp20x_pek->irq_dbr);
+		return axp20x_pek->irq_dbr;
+	}
+	axp20x_pek->irq_dbr = regmap_irq_get_virq(axp20x->regmap_irqc,
+						  axp20x_pek->irq_dbr);
+
+	axp20x_pek->irq_dbf = platform_get_irq_byname(pdev, "PEK_DBF");
+	if (axp20x_pek->irq_dbf < 0) {
+		dev_err(&pdev->dev, "No IRQ for PEK_DBF, error=%d\n",
+				axp20x_pek->irq_dbf);
+		return axp20x_pek->irq_dbf;
+	}
+	axp20x_pek->irq_dbf = regmap_irq_get_virq(axp20x->regmap_irqc,
+						  axp20x_pek->irq_dbf);
+
+	axp20x_pek->input = devm_input_allocate_device(&pdev->dev);
+	if (!axp20x_pek->input)
+		return -ENOMEM;
+
+	idev = axp20x_pek->input;
+
+	idev->name = "axp20x-pek";
+	idev->phys = "m1kbd/input2";
+	idev->dev.parent = &pdev->dev;
+
+	input_set_capability(idev, EV_KEY, KEY_POWER);
+
+	input_set_drvdata(idev, axp20x_pek);
+
+	error = devm_request_threaded_irq(&pdev->dev, axp20x_pek->irq_dbr,
+					  NULL, axp20x_pek_irq, 0,
+					  "axp20x-pek-dbr", idev);
+	if (error) {
+		dev_err(axp20x->dev, "Failed to request dbr IRQ#%d: %d\n",
+			axp20x_pek->irq_dbr, error);
+
+		return error;
+	}
+
+	error = devm_request_threaded_irq(&pdev->dev, axp20x_pek->irq_dbf,
+					  NULL, axp20x_pek_irq, 0,
+					  "axp20x-pek-dbf", idev);
+	if (error) {
+		dev_err(axp20x->dev, "Failed to request dbf IRQ#%d: %d\n",
+			axp20x_pek->irq_dbf, error);
+		return error;
+	}
+
+	idev->dev.groups = dev_attr_groups;
+	error = input_register_device(idev);
+	if (error) {
+		dev_err(axp20x->dev, "Can't register input device: %d\n", error);
+		return error;
+	}
+
+	platform_set_drvdata(pdev, axp20x_pek);
+
+	return 0;
+}
+
+static int axp20x_pek_remove(struct platform_device *pdev)
+{
+	struct axp20x_pek *axp20x_pek = platform_get_drvdata(pdev);
+
+	input_unregister_device(axp20x_pek->input);
+
+	return 0;
+}
+
+static struct platform_driver axp20x_pek_driver = {
+	.probe		= axp20x_pek_probe,
+	.remove		= axp20x_pek_remove,
+	.driver		= {
+		.name		= "axp20x-pek",
+		.owner		= THIS_MODULE,
+	},
+};
+module_platform_driver(axp20x_pek_driver);
+
+MODULE_DESCRIPTION("axp20x Power Button");
+MODULE_AUTHOR("Carlo Caione <carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org>");
+MODULE_LICENSE("GPL");
-- 
1.8.3.2

  parent reply	other threads:[~2014-03-27 21:29 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-27 21:29 [PATCH v3 00/10] mfd: AXP20x: Add support for AXP202 and AXP209 Carlo Caione
     [not found] ` <1395955764-18103-1-git-send-email-carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org>
2014-03-27 21:29   ` [PATCH v3 01/10] mfd: AXP20x: Add mfd driver for AXP20x PMIC Carlo Caione
     [not found]     ` <1395955764-18103-2-git-send-email-carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org>
2014-03-28  9:21       ` Lee Jones
2014-03-29 15:53         ` Carlo Caione
2014-04-11  9:26         ` Carlo Caione
2014-03-27 21:29   ` [PATCH v3 02/10] dt-bindings: add vendor-prefix for X-Powers Carlo Caione
2014-03-27 21:29   ` [PATCH v3 03/10] mfd: AXP20x: Add bindings documentation Carlo Caione
2014-03-27 21:29   ` Carlo Caione [this message]
     [not found]     ` <1395955764-18103-5-git-send-email-carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org>
2014-03-28  7:38       ` [PATCH v3 04/10] input: misc: Add driver for AXP20x Power Enable Key Dmitry Torokhov
     [not found]         ` <20140328073803.GA22093-WlK9ik9hQGAhIp7JRqBPierSzoNAToWh@public.gmane.org>
2014-03-29 15:36           ` Carlo Caione
     [not found]             ` <20140329153624.GA3952-bi+AKbBUZKZeIdyRz4JgOMwOAu8XWILU@public.gmane.org>
2014-03-29 19:05               ` Dmitry Torokhov
2014-03-27 21:29   ` [PATCH v3 09/10] ARM: sunxi: Add AXP20x support in defconfig Carlo Caione
2014-03-27 21:29 ` [PATCH v3 05/10] input: misc: Add ABI docs for AXP20x PEK Carlo Caione
2014-03-27 21:29 ` [PATCH v3 06/10] regulator: AXP20x: Add support for regulators subsystem Carlo Caione
     [not found]   ` <1395955764-18103-7-git-send-email-carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org>
2014-03-28 13:39     ` Mark Brown
2014-03-29 17:52       ` [linux-sunxi] " Carlo Caione
     [not found]         ` <20140329175201.GD3952-bi+AKbBUZKZeIdyRz4JgOMwOAu8XWILU@public.gmane.org>
2014-03-30  0:47           ` Mark Brown
2014-03-27 21:29 ` [PATCH v3 07/10] ARM: sunxi: dt: Add x-powers-axp209.dtsi file Carlo Caione
     [not found]   ` <1395955764-18103-8-git-send-email-carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org>
2014-03-28 13:34     ` Mark Brown
     [not found]       ` <20140328133438.GA19846-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2014-03-29 16:14         ` Carlo Caione
2014-03-27 21:29 ` [PATCH v3 08/10] ARM: sun7i/sun4i: dt: Add AXP209 support to various boards Carlo Caione
2014-03-28  3:12   ` Chen-Yu Tsai
2014-03-28  7:37     ` [linux-sunxi] " Carlo Caione
     [not found]   ` <1395955764-18103-9-git-send-email-carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org>
2014-03-28 10:11     ` Maxime Ripard
2014-03-28 11:38       ` Mark Brown
     [not found]         ` <20140328113839.GB30768-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2014-03-28 12:54           ` Maxime Ripard
2014-03-28 13:12             ` Mark Brown
2014-03-27 21:29 ` [PATCH v3 10/10] ARM: sunxi: Add AXP20x support multi_v7_defconfig Carlo Caione
2014-03-28  8:01 ` [PATCH v3 00/10] mfd: AXP20x: Add support for AXP202 and AXP209 Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1395955764-18103-5-git-send-email-carlo@caione.org \
    --to=carlo-ka+7e9hrn00dnm+yrofe0a@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=emilio-0Z03zUJReD5OxF6Tv1QG9Q@public.gmane.org \
    --cc=hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
    --cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
    --cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
    --cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
    --cc=wens-jdAy2FN1RRM@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).