From: Alexander Shiyan <shc_work@mail.ru>
To: linux-input@vger.kernel.org
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Alexander Shiyan <shc_work@mail.ru>
Subject: [PATCH v2] input: gpio-beeper: Simplify GPIO handling
Date: Sat, 26 Apr 2014 09:46:54 +0400 [thread overview]
Message-ID: <1398491214-14936-1-git-send-email-shc_work@mail.ru> (raw)
This patch simplifies GPIO handling in the driver by using GPIO
functions based on descriptors. As a result this driver now can
be used for boards without DT support.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
drivers/input/misc/Kconfig | 2 +-
drivers/input/misc/gpio-beeper.c | 34 +++++++++++++++-------------------
2 files changed, 16 insertions(+), 20 deletions(-)
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 5928ea7..2ff4425 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -224,7 +224,7 @@ config INPUT_GP2A
config INPUT_GPIO_BEEPER
tristate "Generic GPIO Beeper support"
- depends on OF_GPIO
+ depends on GPIOLIB
help
Say Y here if you have a beeper connected to a GPIO pin.
diff --git a/drivers/input/misc/gpio-beeper.c b/drivers/input/misc/gpio-beeper.c
index b757435..4b90877 100644
--- a/drivers/input/misc/gpio-beeper.c
+++ b/drivers/input/misc/gpio-beeper.c
@@ -1,7 +1,7 @@
/*
* Generic GPIO beeper driver
*
- * Copyright (C) 2013 Alexander Shiyan <shc_work@mail.ru>
+ * Copyright (C) 2013-2014 Alexander Shiyan <shc_work@mail.ru>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -11,7 +11,7 @@
#include <linux/input.h>
#include <linux/module.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio.h>
#include <linux/workqueue.h>
#include <linux/platform_device.h>
@@ -19,14 +19,13 @@
struct gpio_beeper {
struct work_struct work;
- int gpio;
- bool active_low;
- bool beeping;
+ struct gpio_desc *desc;
+ int beeping;
};
-static void gpio_beeper_toggle(struct gpio_beeper *beep, bool on)
+static void gpio_beeper_toggle(struct gpio_beeper *beep, int val)
{
- gpio_set_value_cansleep(beep->gpio, on ^ beep->active_low);
+ gpiod_set_value_cansleep(beep->desc, val);
}
static void gpio_beeper_work(struct work_struct *work)
@@ -59,24 +58,24 @@ static void gpio_beeper_close(struct input_dev *input)
struct gpio_beeper *beep = input_get_drvdata(input);
cancel_work_sync(&beep->work);
- gpio_beeper_toggle(beep, false);
+ gpio_beeper_toggle(beep, 0);
}
static int gpio_beeper_probe(struct platform_device *pdev)
{
struct gpio_beeper *beep;
- enum of_gpio_flags flags;
struct input_dev *input;
- unsigned long gflags;
int err;
beep = devm_kzalloc(&pdev->dev, sizeof(*beep), GFP_KERNEL);
if (!beep)
return -ENOMEM;
- beep->gpio = of_get_gpio_flags(pdev->dev.of_node, 0, &flags);
- if (!gpio_is_valid(beep->gpio))
- return beep->gpio;
+ beep->desc = devm_gpiod_get(&pdev->dev, NULL);
+ if (!beep->desc)
+ return -EINVAL;
+ if (IS_ERR(beep->desc))
+ return PTR_ERR(beep->desc);
input = devm_input_allocate_device(&pdev->dev);
if (!input)
@@ -94,10 +93,7 @@ static int gpio_beeper_probe(struct platform_device *pdev)
input_set_capability(input, EV_SND, SND_BELL);
- beep->active_low = flags & OF_GPIO_ACTIVE_LOW;
- gflags = beep->active_low ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-
- err = devm_gpio_request_one(&pdev->dev, beep->gpio, gflags, pdev->name);
+ err = gpiod_direction_output(beep->desc, 0);
if (err)
return err;
@@ -106,7 +102,7 @@ static int gpio_beeper_probe(struct platform_device *pdev)
return input_register_device(input);
}
-static struct of_device_id gpio_beeper_of_match[] = {
+static struct of_device_id __maybe_unused gpio_beeper_of_match[] = {
{ .compatible = BEEPER_MODNAME, },
{ }
};
@@ -116,7 +112,7 @@ static struct platform_driver gpio_beeper_platform_driver = {
.driver = {
.name = BEEPER_MODNAME,
.owner = THIS_MODULE,
- .of_match_table = gpio_beeper_of_match,
+ .of_match_table = of_match_ptr(gpio_beeper_of_match),
},
.probe = gpio_beeper_probe,
};
--
1.8.3.2
next reply other threads:[~2014-04-26 5:47 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-26 5:46 Alexander Shiyan [this message]
2014-04-29 2:21 ` [PATCH v2] input: gpio-beeper: Simplify GPIO handling Dmitry Torokhov
2014-04-29 2:55 ` Alexander Shiyan
2014-04-29 3:22 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1398491214-14936-1-git-send-email-shc_work@mail.ru \
--to=shc_work@mail.ru \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).