From: "Michal Malý" <madcatxster@devoid-pointer.net>
To: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: dmitry.torokhov@gmail.com, jkosina@suse.cz, elias.vds@gmail.com,
anssi.hannula@iki.fi, simon@mungewell.org,
"Michal Malý" <madcatxster@devoid-pointer.net>
Subject: [PATCH v3 03/24] input: Port twl4030-vibra to ff-memless-next
Date: Sat, 26 Apr 2014 13:57:40 +0200 [thread overview]
Message-ID: <1398513696-12626-4-git-send-email-madcatxster@devoid-pointer.net> (raw)
In-Reply-To: <1398513696-12626-1-git-send-email-madcatxster@devoid-pointer.net>
Port twl4030-vibra to ff-memless-next
Signed-off-by: Michal Malý <madcatxster@devoid-pointer.net>
---
drivers/input/misc/Kconfig | 2 +-
drivers/input/misc/twl4030-vibra.c | 31 +++++++++++++++++++++++++------
2 files changed, 26 insertions(+), 7 deletions(-)
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index f669cc7..817156f 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -407,7 +407,7 @@ config INPUT_TWL4030_VIBRA
tristate "Support for TWL4030 Vibrator"
depends on TWL4030_CORE
select MFD_TWL4030_AUDIO
- select INPUT_FF_MEMLESS
+ select INPUT_FF_MEMLESS_NEXT
help
This option enables support for TWL4030 Vibrator Driver.
diff --git a/drivers/input/misc/twl4030-vibra.c b/drivers/input/misc/twl4030-vibra.c
index 960ef2a..5274ad2 100644
--- a/drivers/input/misc/twl4030-vibra.c
+++ b/drivers/input/misc/twl4030-vibra.c
@@ -32,9 +32,11 @@
#include <linux/mfd/twl4030-audio.h>
#include <linux/input.h>
#include <linux/slab.h>
+#include <linux/input/ff-memless-next.h>
/* MODULE ID2 */
#define LEDEN 0x00
+#define FF_UPDATE_RATE 50
/* ForceFeedback */
#define EFFECT_DIR_180_DEG 0x8000 /* range is 0 - 0xFFFF */
@@ -134,14 +136,31 @@ static void vibra_play_work(struct work_struct *work)
/*** Input/ForceFeedback ***/
static int vibra_play(struct input_dev *input, void *data,
- struct ff_effect *effect)
+ const struct mlnx_effect_command *command)
{
struct vibra_info *info = input_get_drvdata(input);
+ const struct mlnx_rumble_force *rumble_force = &command->u.rumble_force;
+
+ switch (command->cmd) {
+ case MLNX_START_RUMBLE:
+ if (command->u.rumble_force.strong) {
+ info->speed = rumble_force->strong >> 8;
+ info->direction = rumble_force->strong_dir < EFFECT_DIR_180_DEG ?
+ 0 : 1;
+ } else {
+ info->speed = rumble_force->weak >> 9;
+ info->direction = rumble_force->weak_dir < EFFECT_DIR_180_DEG ?
+ 0 : 1;
+ }
+ break;
+ case MLNX_STOP_RUMBLE:
+ info->speed = 0;
+ info->direction = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
- info->speed = effect->u.rumble.strong_magnitude >> 8;
- if (!info->speed)
- info->speed = effect->u.rumble.weak_magnitude >> 9;
- info->direction = effect->direction < EFFECT_DIR_180_DEG ? 0 : 1;
schedule_work(&info->play_work);
return 0;
}
@@ -227,7 +246,7 @@ static int twl4030_vibra_probe(struct platform_device *pdev)
info->input_dev->close = twl4030_vibra_close;
__set_bit(FF_RUMBLE, info->input_dev->ffbit);
- ret = input_ff_create_memless(info->input_dev, NULL, vibra_play);
+ ret = input_ff_create_mlnx(info->input_dev, NULL, vibra_play, FF_UPDATE_RATE);
if (ret < 0) {
dev_dbg(&pdev->dev, "couldn't register vibrator to FF\n");
return ret;
--
1.9.2
next prev parent reply other threads:[~2014-04-26 11:57 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-26 11:57 [PATCH v3 00/24] input: Introduce ff-memless-next as an improved replacement for ff-memless Michal Malý
2014-04-26 11:57 ` [PATCH v3 01/24] input: Add ff-memless-next module Michal Malý
2014-04-26 13:07 ` Antonio Ospite
2014-04-26 15:04 ` Michal Malý
2014-04-26 11:57 ` [PATCH v3 02/24] input: Port arizona-haptics to ff-memless-next Michal Malý
2014-04-26 11:57 ` Michal Malý [this message]
2014-04-26 11:57 ` [PATCH v4 04/24] input: Port twl6040-vibra " Michal Malý
2014-04-26 11:57 ` [PATCH v3 05/24] input: Port max8997_haptic " Michal Malý
2014-04-26 11:57 ` [PATCH v3 06/24] input: Port pm8xxx-vibrator " Michal Malý
2014-04-26 11:57 ` [PATCH v3 07/24] hid: Port hid-axff " Michal Malý
2014-04-26 11:57 ` [PATCH v3 08/24] hid: Port hid-emsff " Michal Malý
2014-04-26 11:57 ` [PATCH v3 09/24] hid: Port hid-dr " Michal Malý
2014-04-26 11:57 ` [PATCH v3 10/24] hid: Port hid-gaff " Michal Malý
2014-04-26 11:57 ` [PATCH v3 11/24] hid: Port hid-holtekff " Michal Malý
2014-04-26 11:57 ` [PATCH v3 12/24] hid: Port hid-lgff " Michal Malý
2014-04-26 11:57 ` [PATCH v3 13/24] hid: Port hid-lg3ff " Michal Malý
2014-04-26 11:57 ` [PATCH v3 14/24] hid: Port hid-pl " Michal Malý
2014-04-26 11:57 ` [PATCH v3 15/24] hid: Port hid-sjoy " Michal Malý
2014-04-26 11:57 ` [PATCH v3 16/24] hid: Port hid-sony " Michal Malý
2014-04-26 13:09 ` Antonio Ospite
2014-04-26 15:05 ` Michal Malý
2014-04-26 11:57 ` [PATCH v3 17/24] hid: Port hid-tmff " Michal Malý
2014-04-26 11:57 ` [PATCH v3 18/24] hid: Port hid-wiimote-modules " Michal Malý
2014-04-26 11:57 ` [PATCH v3 19/24] hid: Port hid-zpff " Michal Malý
2014-04-26 11:57 ` [PATCH v3 20/24] input: Port gamecon " Michal Malý
2014-04-26 11:57 ` [PATCH v3 21/24] input: Port xpad " Michal Malý
2014-04-26 11:57 ` [PATCH v3 22/24] hid: Port hid-lg2ff " Michal Malý
2014-04-26 11:58 ` [PATCH v3 23/24] hid: Port hid-lg4ff " Michal Malý
2014-04-26 13:50 ` Elias Vanderstuyft
2014-04-26 11:58 ` [PATCH v3 24/24] input: Replace ff-memless with ff-memless-next Michal Malý
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1398513696-12626-4-git-send-email-madcatxster@devoid-pointer.net \
--to=madcatxster@devoid-pointer.net \
--cc=anssi.hannula@iki.fi \
--cc=dmitry.torokhov@gmail.com \
--cc=elias.vds@gmail.com \
--cc=jkosina@suse.cz \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=simon@mungewell.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).