From: Beomho Seo <beomho.seo@samsung.com>
To: linux-input@vger.kernel.org, dmitry.torokhov@gmail.com,
jy0922.shim@samsung.com
Cc: sachin.kamat@linaro.org, myungjoo.ham@samsung.com,
jh80.chung@samsung.com, cw00.choi@samsung.com,
Beomho Seo <beomho.seo@samsung.com>
Subject: [PATCH 1/2] Input: mcs_touchkey: use devm_* functions
Date: Thu, 22 May 2014 20:26:19 +0900 [thread overview]
Message-ID: <1400757980-15156-2-git-send-email-beomho.seo@samsung.com> (raw)
In-Reply-To: <1400757980-15156-1-git-send-email-beomho.seo@samsung.com>
This patch use devm_* funtions in mcs_touchkey driver.
As a result, error path and remove() funtion is simplified.
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
---
drivers/input/keyboard/mcs_touchkey.c | 49 +++++++++------------------------
1 file changed, 13 insertions(+), 36 deletions(-)
diff --git a/drivers/input/keyboard/mcs_touchkey.c b/drivers/input/keyboard/mcs_touchkey.c
index 1da8e0b..74df214 100644
--- a/drivers/input/keyboard/mcs_touchkey.c
+++ b/drivers/input/keyboard/mcs_touchkey.c
@@ -103,7 +103,6 @@ static int mcs_touchkey_probe(struct i2c_client *client,
struct mcs_touchkey_data *data;
struct input_dev *input_dev;
unsigned int fw_reg;
- int fw_ver;
int error;
int i;
@@ -116,11 +115,10 @@ static int mcs_touchkey_probe(struct i2c_client *client,
data = kzalloc(sizeof(struct mcs_touchkey_data) +
sizeof(data->keycodes[0]) * (pdata->key_maxval + 1),
GFP_KERNEL);
- input_dev = input_allocate_device();
+ input_dev = devm_input_allocate_device(&client->dev);
if (!data || !input_dev) {
dev_err(&client->dev, "Failed to allocate memory\n");
- error = -ENOMEM;
- goto err_free_mem;
+ return -ENOMEM;
}
data->client = client;
@@ -139,13 +137,12 @@ static int mcs_touchkey_probe(struct i2c_client *client,
fw_reg = MCS5080_TOUCHKEY_FW;
}
- fw_ver = i2c_smbus_read_byte_data(client, fw_reg);
- if (fw_ver < 0) {
- error = fw_ver;
+ error = i2c_smbus_read_byte_data(client, fw_reg);
+ if (error < 0) {
dev_err(&client->dev, "i2c read error[%d]\n", error);
- goto err_free_mem;
- }
- dev_info(&client->dev, "Firmware version: %d\n", fw_ver);
+ return error;
+ } else
+ dev_info(&client->dev, "Firmware version: %d\n", error);
input_dev->name = "MELPAS MCS Touchkey";
input_dev->id.bustype = BUS_I2C;
@@ -176,40 +173,21 @@ static int mcs_touchkey_probe(struct i2c_client *client,
data->poweron(true);
}
- error = request_threaded_irq(client->irq, NULL, mcs_touchkey_interrupt,
- IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
- client->dev.driver->name, data);
+ error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+ mcs_touchkey_interrupt, IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ dev_name(&client->dev), data);
if (error) {
dev_err(&client->dev, "Failed to register interrupt\n");
- goto err_free_mem;
+ return error;
}
error = input_register_device(input_dev);
if (error)
- goto err_free_irq;
+ dev_err(&client->dev, "Failed to register input device\n");
+ return error;
i2c_set_clientdata(client, data);
return 0;
-
-err_free_irq:
- free_irq(client->irq, data);
-err_free_mem:
- input_free_device(input_dev);
- kfree(data);
- return error;
-}
-
-static int mcs_touchkey_remove(struct i2c_client *client)
-{
- struct mcs_touchkey_data *data = i2c_get_clientdata(client);
-
- free_irq(client->irq, data);
- if (data->poweron)
- data->poweron(false);
- input_unregister_device(data->input_dev);
- kfree(data);
-
- return 0;
}
static void mcs_touchkey_shutdown(struct i2c_client *client)
@@ -269,7 +247,6 @@ static struct i2c_driver mcs_touchkey_driver = {
.pm = &mcs_touchkey_pm_ops,
},
.probe = mcs_touchkey_probe,
- .remove = mcs_touchkey_remove,
.shutdown = mcs_touchkey_shutdown,
.id_table = mcs_touchkey_id,
};
--
1.7.9.5
next prev parent reply other threads:[~2014-05-22 11:26 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-22 11:26 [PATCH 0/2] Use devm_* functions for Melfas touch device Beomho Seo
2014-05-22 11:26 ` Beomho Seo [this message]
2014-05-22 11:26 ` [PATCH 2/2] Input: mcs5000_ts: use devm_* functions Beomho Seo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400757980-15156-2-git-send-email-beomho.seo@samsung.com \
--to=beomho.seo@samsung.com \
--cc=cw00.choi@samsung.com \
--cc=dmitry.torokhov@gmail.com \
--cc=jh80.chung@samsung.com \
--cc=jy0922.shim@samsung.com \
--cc=linux-input@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
--cc=sachin.kamat@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox