From: Reyad Attiyat <reyad.attiyat@gmail.com>
To: linux-kernel@vger.kernel.org,
srinivas.pandruvada@linux.intel.com, jkosina@suse.cz,
linux-input@vger.kernel.org
Cc: Reyad Attiyat <reyad.attiyat@gmail.com>
Subject: [PATCH] HID: hid-sensor-hub: Make all locks of dyn_callback_lock disable interrupts.
Date: Tue, 10 Jun 2014 15:11:37 -0500 [thread overview]
Message-ID: <1402431097-3883-1-git-send-email-reyad.attiyat@gmail.com> (raw)
The dynamic callback lock (dyn_callback_lock) must not be interrupted
when locked because the lock is used in the interrupt handler function sensor_hub_raw_event().
Signed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com>
---
drivers/hid/hid-sensor-hub.c | 31 ++++++++++++++++++-------------
1 file changed, 18 insertions(+), 13 deletions(-)
diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c
index a8d5c8f..6547138 100644
--- a/drivers/hid/hid-sensor-hub.c
+++ b/drivers/hid/hid-sensor-hub.c
@@ -133,10 +133,11 @@ static struct hid_sensor_hub_callbacks *sensor_hub_get_callback(
struct hid_sensor_hub_device **hsdev,
void **priv)
{
+ unsigned long flags;
struct hid_sensor_hub_callbacks_list *callback;
struct sensor_hub_data *pdata = hid_get_drvdata(hdev);
- spin_lock(&pdata->dyn_callback_lock);
+ spin_lock_irqsave(&pdata->dyn_callback_lock, flags);
list_for_each_entry(callback, &pdata->dyn_callback_list, list)
if (callback->usage_id == usage_id &&
(collection_index >=
@@ -145,10 +146,10 @@ static struct hid_sensor_hub_callbacks *sensor_hub_get_callback(
callback->hsdev->end_collection_index)) {
*priv = callback->priv;
*hsdev = callback->hsdev;
- spin_unlock(&pdata->dyn_callback_lock);
+ spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags);
return callback->usage_callback;
}
- spin_unlock(&pdata->dyn_callback_lock);
+ spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags);
return NULL;
}
@@ -157,19 +158,20 @@ int sensor_hub_register_callback(struct hid_sensor_hub_device *hsdev,
u32 usage_id,
struct hid_sensor_hub_callbacks *usage_callback)
{
+ unsigned long flags;
struct hid_sensor_hub_callbacks_list *callback;
struct sensor_hub_data *pdata = hid_get_drvdata(hsdev->hdev);
- spin_lock(&pdata->dyn_callback_lock);
+ spin_lock_irqsave(&pdata->dyn_callback_lock, flags);
list_for_each_entry(callback, &pdata->dyn_callback_list, list)
if (callback->usage_id == usage_id &&
callback->hsdev == hsdev) {
- spin_unlock(&pdata->dyn_callback_lock);
+ spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags);
return -EINVAL;
}
callback = kzalloc(sizeof(*callback), GFP_ATOMIC);
if (!callback) {
- spin_unlock(&pdata->dyn_callback_lock);
+ spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags);
return -ENOMEM;
}
callback->hsdev = hsdev;
@@ -177,7 +179,7 @@ int sensor_hub_register_callback(struct hid_sensor_hub_device *hsdev,
callback->usage_id = usage_id;
callback->priv = NULL;
list_add_tail(&callback->list, &pdata->dyn_callback_list);
- spin_unlock(&pdata->dyn_callback_lock);
+ spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags);
return 0;
}
@@ -186,10 +188,11 @@ EXPORT_SYMBOL_GPL(sensor_hub_register_callback);
int sensor_hub_remove_callback(struct hid_sensor_hub_device *hsdev,
u32 usage_id)
{
+ unsigned long flags;
struct hid_sensor_hub_callbacks_list *callback;
struct sensor_hub_data *pdata = hid_get_drvdata(hsdev->hdev);
- spin_lock(&pdata->dyn_callback_lock);
+ spin_lock_irqsave(&pdata->dyn_callback_lock, flags);
list_for_each_entry(callback, &pdata->dyn_callback_list, list)
if (callback->usage_id == usage_id &&
callback->hsdev == hsdev) {
@@ -197,7 +200,7 @@ int sensor_hub_remove_callback(struct hid_sensor_hub_device *hsdev,
kfree(callback);
break;
}
- spin_unlock(&pdata->dyn_callback_lock);
+ spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags);
return 0;
}
@@ -376,34 +379,36 @@ EXPORT_SYMBOL_GPL(sensor_hub_input_get_attribute_info);
#ifdef CONFIG_PM
static int sensor_hub_suspend(struct hid_device *hdev, pm_message_t message)
{
+ unsigned long flags;
struct sensor_hub_data *pdata = hid_get_drvdata(hdev);
struct hid_sensor_hub_callbacks_list *callback;
hid_dbg(hdev, " sensor_hub_suspend\n");
- spin_lock(&pdata->dyn_callback_lock);
+ spin_lock_irqsave(&pdata->dyn_callback_lock, flags);
list_for_each_entry(callback, &pdata->dyn_callback_list, list) {
if (callback->usage_callback->suspend)
callback->usage_callback->suspend(
callback->hsdev, callback->priv);
}
- spin_unlock(&pdata->dyn_callback_lock);
+ spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags);
return 0;
}
static int sensor_hub_resume(struct hid_device *hdev)
{
+ unsigned long flags;
struct sensor_hub_data *pdata = hid_get_drvdata(hdev);
struct hid_sensor_hub_callbacks_list *callback;
hid_dbg(hdev, " sensor_hub_resume\n");
- spin_lock(&pdata->dyn_callback_lock);
+ spin_lock_irqsave(&pdata->dyn_callback_lock, flags);
list_for_each_entry(callback, &pdata->dyn_callback_list, list) {
if (callback->usage_callback->resume)
callback->usage_callback->resume(
callback->hsdev, callback->priv);
}
- spin_unlock(&pdata->dyn_callback_lock);
+ spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags);
return 0;
}
--
1.9.3
next reply other threads:[~2014-06-10 20:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-10 20:11 Reyad Attiyat [this message]
2014-06-10 20:13 ` [PATCH] HID: hid-sensor-hub: Make all locks of dyn_callback_lock disable interrupts Reyad Attiyat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1402431097-3883-1-git-send-email-reyad.attiyat@gmail.com \
--to=reyad.attiyat@gmail.com \
--cc=jkosina@suse.cz \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=srinivas.pandruvada@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).